1U 19in Tool-Less Snap-In Filler Panel Multipack (2 pack) (TAA Compliant)

Description

1U 19in Tool-Less Snap-In Filler Panel Multipack (2 pack) (TAA Compliant)
Fills an open rack unit in racks and cabinets where separation of cold air and hot air is required
0 Reviews

Product # :
14631
Description Features Certifications Specs Support
Product Features
• Available in 1U and 2U sizes
• Snaps into 19in EIA/ECA-310-E compliant tapped or 3/8in square hole mounting rails without modification
• Patent pending design does not require field modification to fit a tapped hole
• Specially designed clips snap into mounting rails as thick as 0.187in (typ. EIA rack) or as thin as 0.078in (some server cabinets)
• Ridges along the top and bottom rear edges of the panel make a seal without creating a tolerance build when using multiple filler panels
Product Description
This tool-less snap-in filler panel is an ideal solution to fill open rack units in racks and cabinets where separation of cold air and hot air is required. These panels are designed to be installed without tools and snap-in to 19in EIA/ECA-310-E compliant tapped or 3/8in square hole mounting rails without modification. The patent pending design does not require field modification to fit a tapped hole and the panel can be swapped back and forth between cabinets or racks with tapped or square holes as necessary. The specially designed clips allow the panels to snap into mounting rails as thick as 0.187in (typical EIA rack) or as thin as 0.078in (some server cabinets).These panels are designed to work effectively with equipment and flat, angled or curved patch panels. Ridges along the top and bottom rear edges of the panel make a seal without creating a tolerance build when using multiple filler panels.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like…
8ft 16 AWG Hospital Grade Power Extension Cord (NEMA 5-15P to NEMA 5-15R) – Orange
$23.99
25ft Premium Shielded HD15 SXGA M/M Monitor Cable with 45° Angled Male Connector
$27.99
PS/2 6-pin Mini Din F/F Gender Changer (Coupler)
$5.99
RapidRun® HDMI® Single Gang Wall Plate Transmitter with VGA, Stereo Audio and One Keystone – Aluminum
$160.99
12in. 22-pin SATA Extension Cable
$10.99
25ft Cat5e Non-Booted Unshielded (UTP) Network Crossover Patch Cable – Red
$11.99
12in F-Type Connector Removal Tool (TAA Compliant)
$12.99
Product Certifications
Product Specifications
Color : Black
UPC : 757120146315
Warranty : 5 years
Vendor : C2G
Weight : 0.700 LB
Physical Characteristics

• Dimensions (HxW): 1.75 x 19.00in
• Minimum mounting hole requirement: #10 or 0.375in square
Product Support
Downloads

• Download the spec sheet
• Download the dimensional drawing