3M 7725SE Scotchcal ElectroCut Graphic Film Dusted Crystal

Description

3M 7725SE Scotchcal ElectroCut Graphic Film Dusted Crystal
FDC 7725SE is 3M™ 7725SE Scotchcal™ Electrocut™ Graphic Film. These are pressure-sensitive films designed
for permanent graphics. Use these films to create unique, special effect films. The transparent dusted crystal film
and the five colors of frosted crystal film have transparent synthetic liners, which resist moisture absorption and static
buildup for easier cutting and assembly, and are intended only for cut graphics. The fluorescent films, available in six
colors, have a paper liner and can be screen printed or electronically cut. To order punched material, use part
number 7775.
3M 7725SE Scotchcal ElectroCut Graphic Film dusted-crystal

Scotchcal™ ElectroCut™ Graphic Film
Series 7725SE-400, Fluorescent Film
For Electronic Cutting, Solvent Screen Printing
Note: 3M’s Dusted and Frosted Crystal Film Series 7725SE-300 are now called 3M™ Crystal Films and are available from 3M Architectural
Markets,
1. Product Description 3.25 mil (0.08 mm) cast film in 6 glossy, opaque, fluorescent colors
Extremely conspicuous in daylight, and activated by exposure to near ultraviolet light
(but not black light)
Offers high attention value under poor visibility, particularly at dawn or dusk
Good electronic cutting characteristics as small as 0.5 inches (12 mm) tall.
Printable with solvent-based screen print inks
Good weather resistance
2. Recommended Types of
Graphics and End Uses
When constructed and used as described in this Bulletin, these types of graphics and end
uses may be warranted by the 3M™ MCS™ Warranty. Please read the entire Bulletin for
details.
Prespaced and electronically-cut graphics
High visibility and weather resistant unprinted or screen printed graphics
3. Performance Overview 3M tests the performance of both individual products and finished graphic constructions.
This table shows the best performance expected from this product without a Warranty
Period and with a Warranty Period.
For detailed graphic construction and application options along with specific Warranty
Periods, please see the Warranty Information, Section 3.
Expected Performance Life. This is the estimated period of time the product should perform satisfactorily.
Unprinted film with no graphic protection, applied to a flat, vertical, outdoor surface. 1 year
3M™ MCS™ Warranty. This is the maximum period of time 3M will warrant the finished graphic performance.
Printed film with a clear coat and applied to a flat, vertical, outdoor surface. 1 year

7725SE 314 Dusted Crystal

7725SE 314 Dusted Crystal