3m High Speed HDMI® Cable with Ethernet and Rotating Connectors (9.8ft)

Description

3m High Speed HDMI® Cable with Ethernet and Rotating Connectors (9.8ft)
Connect a 4K enabled device with an HDMI output to the HDMI input of a monitor, projector or HDTV to display audio and video content up to a 4K resolution
40217
Connector 1 : (1) HDMI Male
Connector 2 : (1) HDMI Male
Description Features Specs Support
Product Features
• Supports all HDMI 1.4 features including resolutions up to 4K (4096 x 2160 at 30Hz, 4:4:4)
• Rotating HDMI connectors
• High Speed HDMI Cable
• 24-karat gold plated contacts
Product Description

The High Speed HDMI Cable with Ethernet and Rotating Connectors supports all HDMI 1.4 features and is the perfect solution for connecting a multimedia source device to a display. The Ethernet capabilities of the cable allow a user to connect multiple Ethernet enabled HDMI devices through a single Ethernet connection for accessing interactive online content or updating device firmware. The rotating connectors on this cable allow it to be installed in tight spaces for support of a wall mounted HDTV. Experience the latest HDMI features including:
• 4K (2160p), which is 4 times the clarity of 1080p/60 video resolution
• 3D video, Deep Color and x.v. Color™
• Dolby® True HD, DTS-HD Master Audio and up to 32 audio channels for a multi-dimensional immersive audio experience
• Up to 1536kHz audio sample frequency for the highest audio fidelity
• Simultaneous delivery of dual video streams to multiple users on the same screen
• Simultaneous delivery of multi-stream audio to multiple users (up to 4)
• Support for the wide angle theatrical 21:9 video aspect ratio
• Dynamic synchronization of video and audio streams
• CEC extensions for control of consumer electronics devices through a single control point
High quality materials and construction ensure a lifetime of dependable performance. Fully-shielded conductors provide complete immunity to EMI/RFI interference, and 24-karat gold-plated connectors ensure superior signal transfer. This fully-functional, high-bandwidth cable is tested to perform at industry standards and is backed by a lifetime warranty.

Note: Both the source device and display must support a HDMI feature in order to pass that feature through this cable
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like…
1U Cable Pass-Through Panel with Brush Strip (TAA Compliant)
$39.99
1U Horizontal Cable Management Panel with 5 High-Capacity D-Rings (TAA Compliant)
$61.99
35ft RapidRun® PC Runner Cable – In-Wall CL2-Rated
$89.99
Cat6 RJ45 UTP Keystone Jack – Orange
$6.99
6in Cat6 Snagless Shielded (STP) Ethernet Network Patch Cable – Blue
$5.99
6ft Select VGA + 3.5mm Stereo Audio A/V Cable M/M – In-Wall CMG-Rated
$18.99
20ft Premium High Speed HDMI® Cable with Ethernet – 4K 60Hz
$49.99
Product Specifications
Color : Black
Length : 3.00 Meter
Jacket Rating : Standard Non-Rated
UPC : 757120402176
Warranty : Lifetime
Vendor : C2G
Weight : 0.360 LB
• HDMI Specification: 1.4

Electrical Characteristics

• Nominal Impedance – 100 ± 10?
• Nominal Capacitance – 90pF/m
• Nominal Velocity of Propagation – 5.6ns
• DC Resistance – 376.96M?/km
• Dielectric Strength – AC 500V – 1 minute
• Insulation Resistance – 100M?

Physical Characteristics

• Voltage Rating – 30V
• Minimum Bend Radius – 9.0mm
• Temperature Rating – 80°C
• Temperature Range – 0° – 80°C
• Approvals – RoHS Compliant
• Warranty – Lifetime
• Package Type – Polybag
Conductor 1 (5pair)
• Conductor Type – 30AWG (1/0.254), Tinned Copper
• Insulation – Foamed PE + SKIN, Red/White, Brown/White, Blue/White, Green/White, Black/White, O.D. – 0.65mm
• Drain Wire – 30AWG (1/0.254), Tinned Aluminum
• Shield – Foil, 100% Coverage
Conductor 2 (4 conductors)
• Conductor Type – 30AWG (1/0.254), Tinned Copper
• Insulation – HDPE, Yellow, Red, Green, Purple, O.D. – 0.70mm
Connector
• Connector Type: HDMI® – Type A Rotating
• Pin Construction: Copper
• Plating: 15µm Gold
• Insulation: PBT + 30% Glass Fiber
• Hood – ABS, Black
• Dimensions (HxWxL) – 9.7 x 21.1 x 57.8mm
• Connector Depth at 90° – 30.4mm
• Connector Height at 90° – 49.4mm
Overall Cable
• Drain Wire – 30AWG (1/0.254), Tinned Aluminum
• Foil Shield – Aluminum, 100% Coverage
• Braided Shield – 16/8/0.10, Tinned Aluminum, 85% Coverage
• Jacket – PVC, Black, O.D. – 6.0mm
Product Support
Downloads

• Download the technical specifications