Description

3m IJ680-10  Scotchlite Reflective Graphic Film

3m IJ680-10  Scotchlite Reflective Graphic Film

7 Mil White Reflective Vinyl with Comply™ Adhesive.
• Up to 9 year durability with up to 7 year 3M MCSTM Warranty on many applications.
• Clear removable pressure activated adhesive with air release.
• Polyethylene layflat paper.
• Splice free.
• Retro-reflectivity values meet ASTM D-4956-11a, type 1, and NFPA1901.
• Do not wet apply.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex.

http://multimedia.3m.com/mws/mediawebserver?CCCCCEeJVOqcwHDdyH8pYH8HpfeApOeJSf1Cpf1CpCCCCCC–

Scotchlite™ Removable Reflective Graphic
Film with Comply™ Adhesive
IJ680CR-10, RG680CR-10 for Solvent, UV and Latex Inkjet Printing
1. Product Description
A. Product Features and
Advantages
 6-mil flexible, enclosed lens, retroreflective films
 Available in white only
 Similar daytime and nighttime appearance that retains most of its reflectivity when wet
 Excellent angularity
 Pressure-activated adhesive for easy sliding and tacking
 Removable with heat
 Designed for excellent cutting and weeding with computer sign cutting equipment
 Air release channels for fast and easy, bubble-free graphic installation
 Unprocessed film resists fuel vapors or occasional spills
B. Recommended Types of
Graphics and End Uses
When constructed and used as described in this Bulletin, these types of graphics and end
uses may be warranted by the 3M™ MCS™ Warranty or the 3M Performance Guarantee.
Please read the entire Bulletin for details.
 Commercial straight trucks, semi-tractors and semi-trailers
 Buses, vans, passenger vehicles, delivery and pickup trucks and enclosed trailers
 Rail and lead cars of trains
 Non-regulated, indoor and outdoor signage, emblems and striping
 Indoor and outdoor graphics and signs
 Small format original equipment manufacturer’s (OEM) decorative and identification
graphics, cautionary and safety labeling
C. Performance Overview 3M tests the performance of both individual products and finished graphic constructions.
This table shows the best performance expected from this product both without a Warranty
Period and with a Warranty Period.
For detailed graphic construction and application options along with specific Warranty
Periods, please see the Warranty Information, Section 5.
Note: *Film RG680CR-10 is available for purchase and use with only a 3M Basic Product
Warranty on a customer test and approve basis.
Expected Performance Life. This is the estimated period of time the product should perform satisfactorily.
Unprinted film with no graphic protection, applied to a flat vertical outdoor surface. 7 years
Unwarranted Period
3M™ MCS™ Warranty. This is the maximum period of time 3M will warrant the finished graphic performance.
Printed film with the best 3M ink and graphic protection option, applied to a flat, vertical, vehicle type
surface.
7 years
Warranty Period
3M Performance Guarantee. This is the maximum period of time 3M will warrant the performance of the 3M materials used.
Printed film with the best ink and graphic protection option, applied to a flat, vertical, vehicle type sur­
face.
2 years
Warranty PeriodProduct Bulletin PIJ680CR – 2
D. Limitations of End Uses This 3M product is not designed or recommended for the following uses. Please contact us
to discuss other options.
(1) Unsuitable End Uses for This
Film
 Do not apply this film on:
– walls.
– substrates with compound curves.
– substrates without a clean, smooth surface or poor paint-to-substrate adhesion.
– stainless steel.
– unpainted metal other than aluminum: contact 3M Technical Service for details.
– paint that is not fully cured.
– FRP with a Tedlar coating.
– flexible substrates.
 Paint that is not thoroughly cured or dried. Read the Important Note for Substrate
Consideration on page 10!
 Low surface energy substrates (some plastics, powder-coated paints, etc.)
 Also see limitations of graphic removal, page 7.
2. Compatible Products This section provides a list of products that are approved by 3M for use with the base film
covered in this Bulletin, and used for the creation of a graphic that is covered by the 3M™
MCS™ Warranty or 3M Performance Guarantee. Refer to the Product and Instruction
Bulletins listed in 3M Related Literature at the end of this Bulletin for more information
about the compatible products.
See the Warranty Information section to determine which compatible products are
approved for your graphic construction.
A. Solvent Inkjet Inks and
Printers for the 3M™
MCS™ Warranty
Ink Series Printer
 3M™ Piezo Inkjet Ink Series 1500v2 EFI™ VUTEk® 150, 2360/3360,
3300/5300 & 3000/5000 Printers
 3M™ Piezo Inkjet Ink Series 4400 HP XL1200, XL1500 Printers
 3M™ Piezo Inkjet Ink Series 4800 HP Scitex TJ8300, TJ8350
Industrial Presses
 3M™ Piezo Inkjet Ink Series 6200 Agfa :Jeti 3312, 3318, 3324, 5024
[Gandinnovations] Printers
 SIIT GX 3M Ink Series Seiko I Infotech ColorPainter™
H-74s, H2-74s, H-104s, H2-104s
W-54s & W-64s Printers
B. Latex Inkjet Inks and
Printers for the 3M™
MCS™ Warranty
 HP 3M LX600 Specialty Latex Ink HP Designjet L65500 Printer and
Scitex LX600, LX800, LX820 & LX850
Printers
 HP LX610 Latex Ink HP Designjet L65500 Printer and
a 3M™ MCS™ Warranty Component Scitex LX600, LX800, LX820 & LX850
Printers
 HP 792 Latex Ink HP Designjet L26100, L26500, and
a 3M™ MCS™ Warranty Component L28500 Printers
C. UV Inkjet Inks and Printers
for the 3M™ MCS™
Warranty
 3M™ Piezo Inkjet UV Ink Series 2200UV EFI™ VUTEk® PV200 Printer
 3M™ Piezo Inkjet UV Ink Series 2700UV Durst Rho 160R & 351R Printers
 3M™ Piezo Inkjet UV Ink Series 2800UV EFI™ VUTEk® QS2000, QS3200,
QS3220 and QS220 Printers
 GS 3M™ Premium UV Inks EFI™ VUTEk® GS2000, GS3200 &
GS3250 Printers,
including GS Pro Series
 GSr 3M™ Premium UV Inks EFI™ VUTEk® GS5000r &
GS3250r Printers
 EFI™ R3225 3M™ UV Ink EFI™ R3225 UV Roll-to-Roll Printer
 Mimaki Ink Series LF-200 Manufactured by 3M Mimaki UJV-160