3M Installation Kit for Textured Surfaces

Description

3M Installation Kit for Textured Surfaces

3M Installation Kit for Textured Surfaces
Combines all the tools you need to install IJ8624 graphic film for textured surfaces and 8524 textured surface overlaminate.
• Durable and attractive metal carrying case
• Steinel HL2010E heat gun, TSA1, TSA2, and TSA3 application tools
• One heat resistant glove
• Five 8” x 10” samples of printed and laminated IJ8624

http://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSufSevTsZxtUN8txox_GevUqevTSevTSevTSeSSSSSS–

Film Applicators for Textured Surfaces
3M Textured Surface Applicator TSA-1, Large Area Roller
3M Textured Surface Applicator TSA-2, Mortar Joint Roller
3M Textured Surface Applicator TSA-3, Edge Roller
3M Two-Handled Textured Surface Applicator TSA-4, Large Area Roller
3M Power Grip Magic Pad Applicator CMP-1
Note: Some tools and processes in this Bulletin are described and claimed in 3M Patents and pending Patent applications.
Intended Use These tools, except the pad applicator CMP-1, are intended primarily for applying 3M™
Scotchcal™ Graphic Film for Textured Surfaces IJ8624 or 8624 ES to moderately textured
wall surfaces using high heat. The use of such high heat with other films is not
recommended.
Health and Safety
! WARNING Physical Comfort
Any activity performed for a long period of time in an awkward position or with a high
amount of force is potentially a risk for causing musculoskeletal strain, pain or injury. When
applying graphics, follow these practices to improve comfort and avoid injury:
• Alternative your tasks during the application.
• Schedule regular breaks.
• Perform stretches or do exercises to improve circulation.
• Avoid awkward reaching.
! WARNING Risks of Using Heat Sources
• Read, understand and follow the safety instructions contained in both this 3M Instruc­
tion Bulletin as well as the heat-gun manufacturer’s manual.
• Wear a heat-resistant glove on the hand(s) holding the applicator.
• Do not use heat sources near solvent mixtures or residues, or in areas where solvent
vapors may be present at hazardous levels.
• Never use an open-flame heat source in this process.
! CAUTION Ventilation
Always provide adequate ventilation to remove emissions that may result from the use of
heat. Failure to provide adequate ventilation can result in operator exposure.
High Heat May Degrade Foam Rollers and Damage Substrate
High heat directed at the foam may degrade the foam. Always direct the heat toward the
film, not the foam roller.
High heat may also damage the substrate: use with caution.
Air Quality Regulations State Volatile Organic Compound (VOC) regulations may prohibit the use of certain cleaning
solutions. For example, the California South Coast Air Quality Management District prohibits
use of certain solvent-based solutions without a permit and other California AQMD’s prohibit
use of certain solutions without a permit or a regulatory exemption. You should check with
your State environmental authorities to determine whether use of this solution is restricted
or prohibited.

3M ID  75347098487    UPC#  00051128793657