3m LC-SC 50/125 OM2 Duplex Multimode Fiber Optic Cable – Plenum CMP-Rated – Red

Description

3m LC-SC 50/125 OM2 Duplex Multimode Fiber Optic Cable – Plenum CMP-Rated – Red
50/125 supports longer distances with lower loss than 62.5/125 fiber! Use for gigabit ethernet, fibre channel, Infiniband®, ATM, and internet protocol applications plus its OFNP plenum-rated for in-wall use without conduit.
0 Reviews

Product # :
37637

Connector 1 :
(1) LC Male
Connector 2 :
(1) SC Male
Colors :
RedBlackBlueGreenOrange
Lengths :
9.8ft3.3ft6.6ft16.4ft32.8ft
Description Certifications Specs
Product Description
Cost-effective solution that provides higher bandwidth and transmission rates and supports longer distances with lower loss than 62.5/125 fiber. Specifically designed for use with today’s narrower aperture components, this cable is fully compatible with multimode applications. The plenum rating provides the fire protection required to run this cable within walls and air plenums without using conduit. The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.

Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 50/125 multimode fiber, immune to electrical interference. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Product Certifications
Product Specifications
Color : Red
Length : 3.00 Meter
UPC : 757120376378
Warranty : Lifetime
Vendor : C2G
Weight : 0.084 LB
• Optical Multimode 2 (OM2) fiber supporting 500 MHz.km OFL at 850/1300 nm.
• LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip)
• SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip)
• Maximum Connector Loss: 0.50 dB
• Typical Connector Loss: 0.30 dB
• Typical Return Loss: -25 dB
• Buffer Material: PVC
• Buffer OD: 900 µm
• Jacket Material: Plenum (OFNP-rated)
• Jacket OD: 1.8 mm
• Installation Tensile Load: 100 N (445 lbs)
• Long-Term Tensile Load: 50 N (222 lbs)
• Maximum Tensile Load: 100 N/cm
• Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in)
• Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in)
• Crush Resistance: 750 N/cm
• Impact Resistance: 1,000 cycles
• Flex Resistance: 5,000 cycles
• Attenuation at 1300 nm: 1.0 dB/km
• Attenuation at 850 nm: 3.5 dB/km
• Operating Temperature: -20°C to +70°C
Please Note: Attenuation testing performed in accordance with EIA/TIA-45571A.