Description

3M Scotchcal Perforated Window Graphic Film 8170-P50

3M Scotchcal Perforated Window Graphic Film 8170-P50

•

3M Scotchcal Perforated Window Graphic Film 8170-P50

• Great conformability and durability on vehicle wrap windows.
• Only cast window film on the market.
• Recommended Graphic Protection: 8914, 8518
• Film 8170-P50 offers all the benefi ts of a high-performance cast vinyl fi lm plus versatility for cross-platform printing.
• It’s the window fi lm you can count on for longer term appearance.
• Conformability and great lifting resistance
• As the only cast vinyl perforated fi lm on the market, it provides better conformability (think rear windows) and greater lifting resistance than calendered vinyl films and yet easy to remove.
• Great image and see-through capabilities
• The 50% perforation pattern enhances light transmission, providing vibrant image quality balanced with excellent see-through capability.
• It is print compatible with UV, latex, solvent, and eco-solvent printers for ink jet and screen printing.
• Durability for peace of mind This premium fi lm is backed by the 3M™ MCS™ Warranty and 3M Performance Guarantee. N

• Great conformability and durability on vehicle wrap windows.
• Only cast window film on the market.
• Recommended Graphic Protection: 8914, 8518

Use this 4 mil cast, vinyl film to make removable, high gloss architectural and vehicle window graphics using selected piezo ink jet printers. The 50 percent perforation pattern allows a full image to be seen from the outside while still allowing good viewing from the inside.

Types of Graphics and End Uses • Store and other building window graphics • Non-regulated vehicle windows • Application to metal areas less than 2 inches (51 cm) wide between windows if they are covered with 3M brand vinyl graphic film or are painted ! CAUTION Glass surfaces exposed to sunlight will absorb heat. A glass surface covered by a film with high opacity or dark-colored ink, including films with small areas of high opacity or dark-colored ink, will absorb more heat. Heat absorption can create thermal stress that results in glass breakage, or thermal cracking. This can cause personal injury or property damage. 3M specifically does not recommend using a film with high opacity or dark-colored ink on glass surfaces with significant exposure to sunlight. Recommended Compatible Products See 3Mgraphics.com/warranties for a complete list of compatible products that are approved by 3M for use with the base film covered in this Bulletin and used for the creation of a graphic that may be eligible for the 3M™ MCS™ Warranty or 3M Performance Guarantee. OEM Inkjet Inks and Printers for the 3M Performance Guarantee See the 3M Performance Guarantee Matrix for a complete list of compatible OEM Inkjet Inks and Printers that are approved by 3M for use with the base film covered in the Bulletin and used for the creation of a graphic that may be eligible for the 3M Performance Guarantee. Screen Printing Inks for 3M™ MCS™ Warranty • 3M™ Screen Printing Ink Series 1900 (Solvent), line color and four color • 3M™ Screen Printing UV Ink Series 9800, line color and four color

Certificate of 3M™ MCS™ Warranty Graphics manufacturers who produce graphics made with all 3M Graphics Products, including 3M Ink purchased through a qualified 3M Distributor or 3M Printing Partner, may register to be recognized with a Certificate of 3M™ MCS™ Warranty. Only graphics manufacturers having a current Certificate of 3M™ MCS™ Warranty are eligible to extend this warranty to their customers. Characteristics These are typical values for unprocessed product. Processing may change the values. Physical Characteristics Characteristic Value Material Cast vinyl Perforation Pattern Film 8170-P50: 50% Film 8170-P40: 40% Film Color White on the image side, black on the reverse side Gloss High gloss Thickness Without adhesive: 4 mil (0.10 mm) With adhesive: 5-6 mil (0.13-0.15 mm) Adhesive Pressure-sensitive, removable Adhesive Color Clear Liner Polyethylene-coated paper with continuous, non-perforated paper liner Tensile Strength 4.2 pounds/inch (0.74 kg/km) minimum Flammability ASTM E84 reports: 8170, or go to the On-line Product Catalog at 3Mgraphics.com All other test reports: call 1-800-328-3908 Product Bulletin 8170 Release C 3 3M Window Graphic Film ™ Application Characteristics Warranty Information Warranty Coverage Overview The warranty coverage for eligible graphics is based on the user both reading and following all applicable and current 3M Graphics Product and Instruction Bulletins. The warranty period for eligible graphics is as stated in the 3M Graphics Warranties Matrices at the time that the film was purchased. Information found at 3Mgraphics.com/warranties includes: • 3M Graphics Warranties Bulletin – This bulletin contains information on limitations and exceptions, and warranty period reductions for 3M Graphics Warranties. The warranty period may be reduced and stipulations may apply for certain constructions and applications, and graphic exposures as covered in this Bulletin. • 3M Graphics Warranties Selector – Use this selector to search for your vertical warranty period by product number, ink type, and ink/printer platform. • U.S. Desert Southwest Region Map – Use this map of hot, arid desert areas to determine if you are subject to reduced warranted durabilities. The warranties set forth in this Bulletin are made in lieu of all other express or implied warranties, including any implied warranty of merchantability, fitness for a particular purpose, or arising out of a course of dealing, custom, or usage of trade. 3M Basic Product Warranty 3M Graphics Products are warranted to be free of defects in materials and manufacture at the time of shipment and to meet the specifications stated in its applicable 3M Graphics Product Bulletin and as further set forth in the 3M Graphics Warranties Bulletin. Limited Remedy The limited remedy applicable to each warranty is addressed in the 3M Graphics Warranties Bulletin found at 3MGraphics.com/warranties. Limitation of Liability Except where prohibited by law, 3M SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO PURCHASER OR USER FOR ANY DIRECT (EXCEPT FOR THE LIMITED REMEDY PROVIDED IN THE 3M GRAPHICS WARRANTIES BULLETIN), INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LABOR, NON-3M MATERIAL CHARGES, LOSS OF PROFITS, REVENUE, BUSINESS, OPPORTUNITY, OR GOODWILL) RESULTING FROM OR IN ANY WAY RELATED TO 3M’S GRAPHICS PRODUCTS, SERVICES, or THIS BULLETIN. This limitation of liability applies regardless of the legal or equitable theory under which such losses or damages are sought. Characteristic Value Finished Graphic Application Recommendation Surface type: Flat and simple curves Substrate type: Transparent substrates such as transparent acrylic, glass, polycarbonate, 3M vinyl films; narrow strips of painted metal between vehicle windows Note: Substrates must not have coatings such as anti-reflection and scratch resistance or built-in heating or defrosting elements, or wipers Application temperature: 40° – 100°F (4° – 38°C) air and substrate Application method: Dry Temperature Range After Application -30 °F to +150 °F (-25 °C to +65 °C) (not for extended periods of time at the extremes) Graphic Removal Removable with heat for up to 1 year on glass, acrylic, polycarbonate Glass:60° – 100°F (16° – 38°C) Acrylic, polycarbonate: 70° – 100°F (21° – 38°C) 4 Product Bulletin 8170 Release C 3M Window Graphic Film ™ Warranty Period Matrices – Inkjet See the 3M Graphics Warranties Matrices at 3MGraphics.com/warranties, for vertical warranty period information specific to your film. Warranty Period Matrices – Screen Print Table A. Screen Print Warranty Period (in years) for Finished Graphics in a Standard U.S. Vertical Exposure (see 3M Graphics Warranties Bulletin for Graphic Type Definitions). Additional Limitations See the 3M Graphics Warranties Bulletin at 3MGraphics.com/warranties, for terms, additional limitations of your warranty, if any, information on reduced warranties for different exposures, and limitations of liability. Factors that Affect Graphic Performance Life The actual performance life of a graphic is affected by: • the combinations of graphics materials used. • complete ink drying or curing. • selection, condition and preparation of the substrate. • surface texture. • application methods. • angle and direction of sun exposure. • environmental conditions. • cleaning or maintenance methods. Graphics Manufacturing Laws and Regulations Some countries have laws or regulations requiring minimum light transmission that may limit or preclude the use of this product on regulated vehicle windows, which may include passenger vehicles and vans. The user is responsible for determining and complying with all applicable standards. ! CAUTION Some states have laws or regulations requiring minimum light transmission that may limit or preclude the use of this product on regulated vehicle windows, which may include passenger vehicles and vans. The user is responsible for determining and complying with all applicable standards. ! CAUTION Applications that require an optically-clear view, such as vehicle window exteriors, must be laminated with 3M™ Scotchcal™ Optically Clear Overlaminate 8914. Failure to apply this overlaminate could result in obstructed or impaired viewing when the product becomes wet. Graphic Protection Screen Print Solvent Ink Series 1900 UV Ink Series 9800 UV Ink Series 9800 Metallic VEH OUT IN VEH OUT IN VEH OUT IN 8914, 8518, 9740i 125125125 1920DR 1 2 5 —————— 9800CL ——— 1 2 5 1 2 5 None ————— 2 ——— Product Bulletin 8170 Release C 5 3M Window Graphic Film ™ Cutting See 3M Instruction Bulletin 4.1 for Sheeting, Scoring and Film Cutting details. Graphic Protection Graphic protection may improve the appearance, performance and durability of the graphic. Click on the graphic protection options listed in the “Recommended Compatible Products” on page 1 or see the 3M Graphics Market Product Catalog, for more information. Application and Installation In addition to other 3M Bulletins specified in this document, the following Bulletins provide details that you may need to successfully apply a graphic. • 3M Instruction Bulletin 4.22. Hot and Cold Roll Lamination for 3M Overlaminates. • 3M Instruction Bulletin 5.1. Select and Prepare Substrates for Graphic Application • 3M Instruction Bulletin 5.36. Application Techniques for Automobiles, Vans and Buses. Complete the 3M Pre-Installation Inspection Record found in this Instruction Bulletin prior to manufacturing or applying a graphic to an automobile, van, or bus. • 3M Instruction Bulletin 5.5. Application, General Procedures for Interior and Exterior Dry Application. • 3M Instruction Bulletin 6.5. Storage, Handling, Maintenance, and Removal of Films and Sheetings. ! CAUTION 3M recommends using 3M™ Edge Sealer Tape 8914 around the perimeter of the graphic to prevent dirt and other contaminants from causing the graphic to prematurely curl and fail. Pressure-sensitive Adhesive This film has a pressure-sensitive adhesive. It bonds to the surface even with light pressure and cannot be repositioned. Maintenance and Cleaning Use a cleaner designed for high-quality painted surfaces. The cleaner must be wet, non-abrasive, without strong solvents, and have a pH value between 3 and 11 (neither strongly acidic nor strongly alkaline). See 3M Instruction Bulletin 6.5 for details. Removal Removal may require heat. The ease and rate of removal depends on a number of factors. See 3M Instruction Bulletin 6.5 for details. Shelf Life, Storage and Shipping Shelf Life The shelf life is never more than 1 year from the date of manufacture on the original box. Storage Conditions • at an ambient temperature less than 86 F (30 C) • Out of sunlight • Clean, dry area • Original container • Bring the film to print room temperature before using Shipping Finished Graphics Flat, or rolled printed side out on 6 inch (15 cm) or larger core. This helps prevent the liner, and, if used, the application tape from popping off. 3M Commercial Solutions 3M Center Building 220­12E-04 St. Paul, MN 55144­1000 1­888­328-3908 Fax 651-736-4233 3Mgraphics.com 3M Canada PO Box 5757 London, ON N6A 4T1 1-800-265-1840 Fax 519-452-6245 3M México S.A. de C.V. Av. Santa Fe No. 55 Col. Santa Fe, Del. Alvaro Obregón México D.F. 01210 General 5255-5270-0400 Fax 5255-5270-2277 3M Puerto Rico, Inc. 350 Chardon Avenue Suite 1100 San Juan, PR 00918 General 787-620-3000 Fax 787-620-3018 3M, MCS, and Scotchcal are trademarks of 3M Company. All other trademarks are the property of their respective owners. © 3M 2015. All rights reserved. Please recycle. 3M Window Graphic Film ™ Health and Safety ! CAUTION When handling any chemical products, read the manufacturers’ container labels and the Safety Data Sheets (SDS) for important health, safety and environmental information. To obtain SDS sheets for 3M products go to 3M.com/SDS, or by mail or in case of an emergency, call 1-800-364-3577 or 1-651-737-6501. When using any equipment, always follow the manufacturers’ instructions for safe operation. Bulletin Change Summary For the most current 3M Technical Information available to successfully use this product, please view this Bulletin electronically and click on the blue underlined links to view the relevant documents. Rev C JUN-2015: • Added Glass Breakage Caution to “Recommended Types of Graphics and End Uses” on page 1. • Updated “Warranty Coverage Overview” on page 3 to include links to specific areas on the 3M Graphics Warranties website to increase