Description

3M Scotchlite Reflective Graphic Film Series 5100R-082 Ruby Red Removable sheets 600 sheets per pack

• Removable, Pressure-sensitive adhesive
• Available in numerous colors, including black (which reflects white)
• Similar daytime and nighttime appearance that retains most of its reflectivity when wet
• Designed for excellent cutting and weeding with computer sign cutting equipment
• For vertical, flat or curved surfaces with or without rivets
• Unprocessed film resists fuel vapors or occasional spills

http://multimedia.3m.com/mws/media/902755O/faq-e-cut.pdf

http://multimedia.3m.com/mws/media/585619O/film-5100-sell-sheet-high-res.PDF

http://multimedia.3m.com/mws/media/585980O/5100-ij5100-scotchlite-reflective-eng-grd-sp-es-pij-tmt.pdf

Product Description
• Series 5100 for Screen Printing and Thermal Mass Transfer
• IJ5100-10 for Solvent, UV, and Latex Inkjet Printing
• 7-mil, flexible, enclosed lens, retroreflective, engineer films that offer flexibility and versatility
Product Features
• Series 5100 available in 15 colors, including black (which reflects white)
• Similar daytime and nighttime appearance that retains most of its reflectivity when wet
• Excellent angularity
• Pressure-sensitive adhesive
• Designed for excellent cutting and weeding with computer sign cutting equipment
• For vertical, flat or curved surfaces with or without rivets
• Unprocessed film resists fuel vapors or occasional spills
• Removable
• Expected Performance Life of 7 years (unwarranted period for unprinted film with no graphic protection, applied to a flat, vertical, outdoor
surface)
Recommended Types of Graphics and End Uses
• Most standard vehicle, straight trucks, semi-trucks and semi-trailers markings and graphics
• Cut letters and decals
• Non-regulated signage
When constructed and used as described in this Bulletin, these types of graphics and end uses may be warranted by the 3M™ MCS™ Warranty
or the 3M Performance Guarantee. Please read the entire Bulletin for details.
i IMPORTANT NOTE
Some substrates such as under-cured polyurethane paint, fiberglass, and some paint systems may continue to outgas for some time.
Two-part polyurethane paints and screen print clears may stop curing when the air and surface temperature are lower than 75 F (24
C). This film is not recommended for use on stainless steel.
Recommended Compatible Products
See 3Mgraphics.com/warranties for a complete list of compatible products that are approved by 3M for use with the base film covered in this
Bulletin and used for the creation of a graphic that may be eligible for the 3M™ MCS™ Warranty or 3M Performance Guarantee.
OEM Inkjet Inks and Printers for the 3M Performance Guarantee
See the 3M Performance Guarantee Matrix for a complete list of compatible OEM Inkjet Inks and Printers that are approved by 3M for use with
the base film covered in the Bulletin and used for the creation of a graphic that may be eligible for the 3M Performance Guarantee.

3M Graphics Warranties
2 Product Bulletin 5100/IJ5100 Revision F
3M Reflective Graphic Film Scotchlite ™ ™
Screen Printing
• 3M™ Screen Printing Ink Series 1900 (Solvent), line color and four color
• 3M™ Scotchlite™ Screen Printing Ink Series 2900 (Solvent)
• 3M™ Screen Printing UV Ink Series 9800, line color and four color
Graphic Protection
• 3M™ Scotchcal™ Gloss Overlaminate 8518
• 3M™ Scotchcal™ Luster Overlaminate 8519
• 3M™ Screen Print Gloss Clear 1920DR
• 3M™ Screen Print UV Gloss Clear 9740i
• 3M™ Screen Print UV Gloss Clear 9800CL
• 3M™ Scotchcal™ Optically Clear Overlaminate 8914
Application Tapes
See 3M Instruction Bulletin AT-1 to determine what application tape is recommend for your film or finished graphic.
Other Products
• 3M™ Edge Sealer 3950
Certificate of 3M™ MCS™ Warranty
Graphic manufacturers who produce digitally printed graphics made with all 3M Graphics Products, including 3M Ink purchased through a
qualified 3M Distributor or 3M Printing Partner, may register to be recognized with a Certificate of 3M™ MCS™ Warranty. Only graphic
manufacturers having a current Certificate of 3M™ MCS™ Warranty are eligible to extend this warranty to their customers.
NOTE: For non-digitally printed Finished Graphics, check your eligibility for the 3M™ MCS™ Warranty by viewing the 3M Graphics Warranty
Period Selector at www.3Mgraphics.com/warranties.
Characteristics
These are typical values for unprocessed product. Processing may change the values.
Physical Characteristics
Characteristic Value
Material Vinyl
Retroreflection
Definition
The typical coefficient of retroreflection defined is measured at a -4 entrance angle and a 0.2 observation
angle. It is expressed in candlepower per foot-candle per square foot (candela/lux/square meter) per ASTM
E810.
The entrance angle is formed by a light beam striking the surface at a point and a line that is perpendicular to
the surface at the same point.
An observation angle is formed by the light beam striking the reflective surface and returning to the observer.
From 800 feet (249 meters), a motorist normally views a graphic at a 0.2 angle.
Thickness With adhesive: 7–8 mil (0.18–0.20 mm)
Adhesive Pressure-sensitive
Adhesive Color Clear with silver underneath
Liner Polyethylene-coated paper
Product Bulletin 5100/IJ5100 Revision F 3
3M Graphic Film Controltac ™ ™ 3M Reflective Graphic Film Scotchlite ™ ™
Application Characteristics
Warranty Information
Warranty Coverage Overview
The warranty coverage for eligible graphics is based on the user both reading and following all applicable and current 3M Graphics Product and
Instruction Bulletins. The warranty period for eligible graphics is as stated in the 3M Graphics Warranties Matrices, found at 3Mgraphics.com/
warranties, at the time that the film was purchased. The warranty period may be reduced and stipulations may apply for certain constructions
and applications, as covered in this Bulletin.
The warranties set forth in this Bulletin are made in lieu of all other express or implied warranties, including any implied warranty of
merchantability, fitness for a particular purpose, or arising out of a course of dealing, custom, or usage of trade.
Adhesion, Typical
24 hours after
application
Aluminum 6.0 pounds/inch (1.1 kg/cm)
FRP (Fiberglass Reinforced Plywood) 3.0 pounds/inch (0.5 kg/cm)
Painted aluminum panels 4.5 pounds/inch (0.8 kg/cm)
Safety Standards See “Health and Safety” on page 7 for ASTM, NFPA® and AAR information
Chemical
Resistance
• Resists mild alkalis, mild acids, and salt
• Excellent resistance to water (does not include immersion)
• Resists occasional fuel spills
Film Colors and
Typical
Retroreflection
At -4° entrance angle and 0.2°
observation angle.
Film
IJ5100-10
5100-10
5100-14
5100-64
5100-65
5100-71
5100-72
5100-74
5100-75
5100-76
5100-77
5100-78
5100-79
5100-81
5100-82
5100-85
Color Name
White
White
Orange
Gold
Rich Gold
Yellow
Red
Royal Purple
Blue
Light Blue
Green
Light Green
Brown
Lemon Yellow
Ruby Red
Black
Typical Coefficient of
Retroreflection
100
100
20
70
65
65
20
5
10
10
20
20
5
75
15
30
Flammability Call 1-800-328-3908
Characteristic Value
Finished Graphic Application
Recommendation
Surface type: flat, with and without rivets, moderate curves
Substrate type: aluminum, Fiberglass Reinforced Plywood (FRP), paint
Graphic orientation: Vertical only
Application method: Dry
Application temperature: air and substrate
• Flat, curved or corrugated surfaces with rivets: 55–100 F (13–38 C)
• Flat without rivets: 50–85 F (10–29 C)
• Flat with rivets: 55–85 F (15–29 C)
Temperature Range After
Application -30 to +200 F (-34 to +93 C) (not for extended periods of time at the extremes)
Characteristic Value
3M Graphics Warranties
4 Product Bulletin 5100/IJ5100 Revision F
3M Reflective Graphic Film Scotchlite ™ ™
3M Basic Product Warranty
3M Graphics Products are warranted to be free of defects in materials and manufacture at the time of shipment and to meet the specifications
stated in its applicable 3M Graphics Product Bulletin and as further set forth in the 3M Graphics Warranties Bulletin.
Limited Remedy
The limited remedy applicable to each warranty is addressed in the 3M Graphics Warranties Bulletin found at 3MGraphics.com/warranties.
Limitation of Liability
Except to the extent prohibited by law, 3M SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO PURCHASER OR USER FOR ANY DIRECT
(EXCEPT FOR THE LIMITED REMEDY PROVIDED HEREIN), INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, LABOR, NON-3M MATERIAL CHARGES, LOSS OF PROFITS, REVENUE, BUSINESS, OPPORTUNITY, OR GOODWILL) RESULTING
FROM OR IN ANY WAY RELATED TO 3M’S GRAPHICS PRODUCTS, SERVICES, OR THIS BULLETIN. This limitation of liability applies regardless of
the legal or equitable theory under which such losses or damages are sought.
Warranty Period Matrices – Unprinted Film
See the 3M Graphics Warranties Matrices at 3MGraphics.com/warranties, for vertical warranty period information specific to your film.
Warranty Period Matrices – Inkjet
See the 3M Graphics Warranties Matrices at 3MGraphics.com/warranties, for vertical warranty period information specific to your film.
Warranty Period Matrices – Screen Print
See the 3M Graphics Warranties Matrices at 3MGraphics.com/warranties, for vertical warranty period information specific to your film.
Additional Limitations
See the 3M Graphics Warranties Bulletin at 3MGraphics.com/warranties, for terms, additional limitations of your warranty, if any, information on
reduced warranties for different exposures, and limitations of liability.
Factors that Affect Graphic Performance Life
The actual performance life of a graphic is affected by:
• the combinations of graphics materials used.
• complete ink drying or curing.
• selection, condition and preparation of the substrate.
• surface texture.
• application methods.
• angle and direction of sun exposure.
• environmental conditions.
• cleaning or maintenance methods.
Graphics Manufacturing
! CAUTION
Before using any equipment, always read the manufacturer’s instructions for safe operation.
Product Bulletin 5100/IJ5100 Revision F 5
3M Graphic Film Controltac ™ ™ 3M Reflective Graphic Film Scotchlite ™ ™
Inkjet Printing
Always read and follow the ink manufacturer’s written instructions on usage.
Total Ink Coverage
• 250% is the maximum recommended total ink coverage for this film for all solvent, latex and UV inks.
Do not exceed the recommended total ink coverage for the ink series used on this product. Having too high a total physical ink amount on the
product results in media characteristic changes, incomplete drying, overlaminate lifting, and/or poor graphic performance. For additional details
about total ink coverage, refer to the 3M Product and Instruction Bulletin for 3M inks or the 3M Performance Guarantee Matrix for OEM inks.
i IMPORTANT NOTE
Be sure to check the consistency of color on reflective film as it may appear different in daytime and nighttime lighting.
Completely Dry Graphics
i IMPORTANT NOTE
Incomplete drying can result in graphic failure including curling, increased shrinkage and adhesion failure, which are not covered under
any 3M Graphic Warranty.
See the ink’s 3M Product and Instruction Bulletin for more details.
Screen Printing
Formulations and processing conditions can affect ink durability. Refer to the Product and Instruction Bulletins for your ink for limitations and
proper usage.
• Solvent ink series 1900 and some colors in the UV ink series 9800 are opaque. Be aware that opaque ink can prevent the film from
retroreflecting in the screen printed areas. Solvent inks series 2900 and the transparent colors from UV ink series 9800 are good choices
when retroreflection is important in the screen printed areas.
• For graphics subjected to fuel vapors or occasional spills, use Solvent ink series 2900 and clear 1920DR.
• Oven dry the last color and the clear when using solvent-based inks on graphics needed for any corrugated application.
Cutting
See 3M Instruction Bulletin 4.1 for Sheeting, Scoring and Film Cutting details.
Graphic Protection
Graphic protection may improve the appearance, performance and durability of the graphic. Click on the graphic protection options listed in the
“Recommended Compatible Products” on page 1 or see the 3M Graphics Market Product Catalog, for more information.
Application Tapes
There are two types of application tapes. See 3M Instruction Bulletin AT-1 to determine what application tape is recommended for your film or
finished graphic.
Premasking Tape
Increases stiffness during application while preventing stretching and damage. Use when little or no liner is exposed. See 3M Instruction Bulletin
4.3 for complete details.
Prespacing Tape
Holds cut and weeded letters or graphics in place during application and after removing the film liner, while preventing stretching and damage.
Use when large amounts of liner are exposed. See 3M Instruction Bulletin 4.3 for complete details.
3M Graphics Warranties
6 Product Bulletin 5100/IJ5100 Revision F
3M Reflective Graphic Film Scotchlite ™ ™
Application and Installation
i IMPORTANT NOTE
This film is not recommended for use on low surface energy substrates such as some plastics, powder-coated paint, etc. The user must
assume responsibility for testing and approving these substrates.
This film can be applied over other recommended 3M graphic systems. Graphics printed with clear 1920DR must be weathered for at
least one year before applying this film over it. See 3M Instruction Bulletin 5.1 for details.
In addition to other 3M Bulletins specified in this document, the following Bulletins provide details that you may need to successfully apply a
graphic.
• 3M Instruction Bulletin 5.4. Application, Fleet Trucks.
• 3M Instruction Bulletin 5.5. Application, General Procedures for Interior and Exterior Dry Application.
i IMPORTANT NOTE
UV inkjet inks may crack if too much heat is used during graphic application to complex curves and deep contours as well as around
rivets. When using heat during application, make sure the film surface temperature does not exceed 212 F (100 C). For best results,
always do a test application of a printed graphic to determine how much heat can be used without damaging the image.
Pressure-sensitive Adhesive
This film has a pressure-sensitive adhesive. It bonds to the surface even with light pressure and cannot be repositioned.
Maintenance and Cleaning
Use a cleaner designed for high-quality painted surfaces. The cleaner must be wet, non-abrasive, without strong solvents, and have a pH value
between 3 and 11 (neither strongly acidic nor strongly alkaline). See 3M Instruction Bulletin 6.5 for details.
Removal
This film uses a permanent adhesive. This film is not easily or cleanly removable. See 3M Instruction Bulletin 6.5 for details.
Shelf Life, Storage and Shipping
Shelf Life
The shelf life is never more than 3 years from the date of manufacture on the original box.
If you process the film, the shelf life is changed to 1 year from the processing date, but not later than the 3 year maximum from the manufacturing
date.
Storage Conditions
• 40 to 100 F (4 to 38 C)
• Out of sunlight
• Clean, dry area
• Original container
• Bring the film to room temperature before use
Shipping Finished Graphics
Flat, or rolled printed side out on 6 inch (15 cm) or larger core. This helps prevent the application tape, if used, from popping off.
Product Bulletin 5100/IJ5100 Revision F 7
3M Graphic Film Controltac ™ ™ 3M Reflective Graphic Film Scotchlite ™ ™
Health and Safety
! CAUTION
When handling any chemical products, read the manufacturers’ container labels and the Safety Data Sheets (SDS) for important health,
safety and environmental information. To obtain SDS sheets for 3M products go to 3M.com/SDS, or by mail or in case of an emergency,
call 1-800-364-3577 or 1-651-737-6501.
When using any equipment, always follow the manufacturers’ instructions for safe operation.
Standards
This information is important for applications that are regulated by ASTM or NFPA® standards, for example, traffic control signs, emergency
vehicles and certain railroad graphics. The user is solely responsible for determining and complying with all current and applicable local, state
and federal regulations regarding the use and application of graphics materials.
ASTM D4956-11a: Standard Specification for Retroreflective Sheeting for Traffic Control
ASTM D4956-11a covers flexible, non-exposed glass bead lenses and microprismatic retroreflective sheeting designed for use on traffic control
signs, delineators, barricades and other devices. For Type I sheeting it specially covers these colors: white, yellow, orange, green, red, blue and
brown. As defined in ASTM D4956-11a, film 5100 and films IJ5100-10 (white) are classified as Type I sheeting (section 4.2.1) with a Class 1
adhesive (section 4.3.1). For corresponding colors covered by ASTM D4956-11a, the aforementioned films (except orange) meet the
requirements specified in section 6.1.1 (minimum performance requirements for Type 1 sheeting).
NFPA ® 1901: Standard for Automotive Fire Apparatus (2009 Edition)
According to NFPA® 1901, section 15.9.3.3 specifies that all retroreflective materials required by section 15.9.3.1 and 15.9.3.2 shall conform
to the requirements of ASTM D4956, Standard Specification for Retroreflective Sheeting for Traffic Control, Section 6.1.1 for Type I sheeting.
Section 15.9.3.3.1 specifies that colors not listed in ASTM D4956 can be used on the front and sides of the fire apparatus as long as the sheeting
has a minimum coefficient of retroreflection of 10 when measured with an observation angle of 0.2 and an entrance angle of -4
AAR: Standard and Recommended Practices
This product is approved for use by the Association of American Railroads (AAR), Safety and Operations, as listed in the Manual of Standards
and Recommended Practices, Section L – Lettering and Marking of Cars, Specification M-947, Adhesive-Backed Films.
Bulletin Change Summary
For the most current 3M Technical Information available to successfully use this product, please view this Bulletin electronically and click on the
blue underlined links to view the relevant documents. Please read the entire Bulletin thoroughly.
Release F DEC-2015:
• Added section for “Warranty Period Matrices – Unprinted Film” on page 4. This information can now be found using the Warranty Selector,
found at www.3Mgraphics.com/Warranties
Red Ruby
Red Yellow Lemon
Yellow White Blue Light
Blue Green Gold Black
Color Number 72 82 71 81 10 75 76 77 64 85
Section 15.9.3.1
(Front & Sides) ••••••••••
Section 15.9.3.2
(Chevrons) ••••