Description
5/8 x 72in Vertical Grounding Bar Kit (TAA Compliant)
Provides a common electrical ground for equipment in a rack or cabinet
0 Reviews
Product # :
14630
Description Features Certifications Specs Contents Support
Product Features
• 1/4in thick electrolytic tough pitch 110 copper alloy bar
• Accommodates one hole lugs or two hole lugs (5/8in on center)
• 2 PEM studs at both ends for ground conductor connection
Product Description
This Vertical Grounding Bar is an ideal solution for creating a ground contact for standard rackmount equipment. Constructed of 1/4in thick electrolytic tough pitch 110 copper alloy, this grounding bar features drilled and tapped holes for ground wire jumpers. Those jumpers bridge to the rack mounted equipment through grounding straps, allowing a direct path to ground rather than going through surrounding equipment. This grounding bar accommodates one hole lugs or two hole lugs (5/8in on center) and has 2 PEM studs at both ends for ground conductor connection.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like…
30m LC-SC 50/125 OM4 Duplex Multimode PVC Fiber Optic Cable – Aqua
$99.99
50m LC-LC 50/125 OM4 Duplex Multimode PVC Fiber Optic Cable – Aqua
$123.99
30m LC-LC 9/125 OS2 Duplex Single-Mode PVC Fiber Optic Cable – Yellow
$65.99
25m LC-LC 50/125 OM4 Duplex Multimode PVC Fiber Optic Cable – Aqua
$75.99
30m LC-LC 50/125 OM2 Duplex Multimode PVC Fiber Optic Cable – Orange
$69.99
20m LC-LC 50/125 OM4 Duplex Multimode PVC Fiber Optic Cable – Aqua
$64.99
8m SC-ST 9/125 OS2 Duplex Single-Mode PVC Fiber Optic Cable – Yellow
$37.99
Product Certifications
Product Specifications
Color : Yellow
UPC : 757120146308
Warranty : 5 years
Vendor : C2G
Weight : 4.227 LB
Physical Characteristics
• Dimensions (HxW): 72.00×0.63in
• Thickness: 0.25in
• Material: Electrolytic tough pitch 110 copper alloy
Package Contents
• 8 – 1/4in x 1/2in stainless steel hex head cap screws
• 3 – white delrin insulators
• 4 – 5/16in stainless steel lock washers
• 8 – 1/4in stainless steel lock washers
• 3 – #12-24 x 5/8in hex washer head screws
• 4 – 5/16in stainless steel hex nuts
• 1 – two hole long barrel compression lugs
Product Support
Downloads
• Download the spec sheet
• Download the dimensional drawing