Description
6ft High Speed HDMI® Cable with Built-In Power Inserter – 4K 60Hz
Provide low loss power insertion for active HDMI devices, while supporting resolutions up to 4K at 60Hz
0 Reviews
Product # :
56790
Connector 1 :
(1) HDMI Male, (1) USB Micro-B Female
Connector 2 :
(1) HDMI Male, (1) USB-A Male, (1) USB Micro-B Male
Description Features Specs Support
Product Features
Supports all HDMI 2.0 features including resolutions up to 4K (4096 x 2160 at 60Hz)
Low loss power insertion
Attached Micro USB female power inserter
Micro USB male to USB-A male cable
Product Description
The High Speed HDMI Cable with Built-In Power Inserter supports all HDMI 2.0 features and is the ideal solution for supporting HDMI bus-powered devices such as extenders, active cables, AOC cables or signal-sensing switches. This cable eliminates the need for separate voltage inserters or adapters, which increases reliability.
Power
The power supplies associated with source devices such as computers, teleconferencing codecs, media players and set-top boxes are designed, according to HDMI standards, to deliver a 55mA hot plug supply. When an accessory demands more current than the source can supply, the system may fail to operate dependably. Insufficient power may manifest as a flashing image (HDCP problem), distorted video (EDID related issues), or even a complete loss of the image (hot plug assertion failure). The HDMI Cable with Built-In Power Inserter allows for the necessary and proper voltages for the hardware handshake, HDCP key authentication and exchange, EDID information exchange and hot plug connection detect.
Performance
The attached power inserter isolates the power from the source device and provides dedicated power to support HDMI switching, splitting, and extension accessories. If an installation leverages active cables with embedded chipsets, embedded electronic-to-optical media conversion, signal-sensing, auto-switching or similar devices, then this power inserter will be a critical performance element.
Note: For proper use of this cable, the USB Micro-B female connector must be attached to a power source. The cable is directional with a Source/Transmitter (TX) side and a Display/Receiver (RX) side. The cable and HDMI connectors are marked with TX and RX for added convenience.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like
HDMI® Inline Extender – 4K 60Hz
$48.99
2-Port HDMI® Splitter – 4K 60Hz
$68.99
2-Port HDMI Auto Switch
$29.99
50ft Active High Speed HDMI® Cable 4K 60Hz – In-Wall CL3-Rated
$129.99
Short Range HDMI® over Cat5 Extender Kit with Auto Equalization (TAA Compliant)
$149.99
1.5ft High Speed HDMI® Cable with Ethernet – 4K 60Hz
$7.99
50ft High Speed HDMI Active Optical Cable (AOC) 4K 30Hz – Plenum, CMP Rated
$280.99
Product Specifications
Color : Black
UPC : 757120567905
Warranty : Lifetime
Vendor : C2G
Weight : 0.228 LB
HDMI Specification: 2.0
Electrical Specifications
Type: UL20276 30AWG/5P/4C; 80°C, 30V; Color: Black; UL-E342987
Voltage Rating: 30V
Signal Bandwidth: 600MHz
Insulation Resistance: 100M(OHMS*KM Min at 20°C)
Dielectric Strength: AC-500V/Min
Physical Specifications
Operating Temperature: 0°C to +50°C; 15-85% RH (Non-Condensing)
Storage Temperature: -25°C to +85°C; 15-85% RH (Non-Condensing)
Shield Type/Braid Coverage: 50%
Shield Type/Braid: 16/4/0.12(AL)
Jacket Material & Thickness: PVC & 0.51mm
Drain Wire AWG & Construction: 30AWG & 7/010TC
Minimum Bend Radius: 120
100% Test for Short/Open: 10 Mohm Insulation Resistance (300V DC)
Product is CE marked and conforms to 2011/65/EU RoHS2
HDMI Connector
Gender: Male x 2
Insulation: Black
Pin: Gold Plated
Plug Shell: Nickel Plated
Micro USB Connector
Gender: Female Micro B
UL2725 28AWG*2C
OD: 3.0mm
Color: Black 45P PVC
Shell: Nickel Plated
USB Power Cable
Gender: USB-A Male to USB Micro-B Male
Contact Resistance: 2 ohm(max)
Insulation Resistance: 10 Mohm(min)
Hi-Pot Test: DC 300V/10ms
Product Support
Downloads
Download the Data Sheet
Downloads
Download the Data Sheet
Reviews
There are no reviews yet.