8 Ohm 50W Audio Amplifier – Plenum Rated (TAA Compliant)

Description

8 Ohm 50W Audio Amplifier – Plenum Rated (TAA Compliant)
Amplify stereo audio signals and provide 50 watts of power to a sound reinforcement system
5.0
 | 
1 Review

Product # :
40880

Input :
(1) 3.5mm Stereo Female
Output :
(1) RCA Stereo Audio Female, (1) 3.5mm Microphone Female
Description Features Certifications Specs Support
Product Features
• Reduces noise in commercial environments
• Industry standard 8 Ohm design
• Designed for installation in Plenum air spaces
Product Description
The 8 Ohm 50W Audio Amplifier is the ideal solution for supporting a sound reinforcement system in a classroom, conference room or other environment that requires installation in a plenum space. This amplifier supplies 50 Watts of power, 25 Watts per channel, and is built to an industry standard 8 Ohm design. This amplifier supports many advanced features which make it a perfect fit for most applications

Noise Reduction

Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.

Standby Mode

After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.

Accessory Power Output

The accessory power output provides 12 Volts DC and 500 mAmps. This makes the amplifier the perfect match for a controller such as the TruLink® A/V Controller

Multiple Inputs

This amplifier acccepts a 3.5mm and RCA Stereo Audio input as well as a 3.5mm Microphone input. The mixing function ensures that audio from all three inputs are mixed and sent to the speaker outputs.

Remote Control

This amplifier is designed to accept either RS232 control or control signals from an industry standard volume control.

Public Address (PA) Sensor

The PA sensor will automatically mute the audio inputs of the amplifier allowing the public address to be heard.

• Download the manual from the Support tab
• Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like…
6ft Wiremold® Uniduct 2800 Multipack (20 pack) – White (TAA Compliant)
$249.99
Wiremold® Uniduct 2800 Blank End Fitting Multipack ( 2 pack) – White (TAA Compliant)
$4.99
Wiremold® Uniduct 2800 90° Flat Elbow – White (TAA Compliant)
$1.99
Wiremold® Uniduct 2800 Internal Elbow – White (TAA Compliant)
$1.99
Wiremold® CordMate II Kit- 2700 Series Raceway (TAA Compliant)
$26.99
6-Port HDMI® Selector Switch (TAA Compliant)
$91.99
2m DVI-I M/M Single Link Digital/Analog Video Cable (6.6ft)
$16.99
Product Certifications
Product Specifications
Color : Black
UPC : 757120408802
Warranty : 1 Year
Vendor : C2G
Weight : 2.660 LB
•Download a PDF with the technical specifications of this product on the Support tab

Electrical Characteristics

• Impedance : >18K? unbalanced
• Frequency Response: 20Hz to 20 KHz (+1dB -3dB)
• THD + Noise: < ±0.05% @ 1 KHz at nominal level (1 watt) • Signal Noise: >80dB
• Input Sensitivity: -10dBV (316mV)

Physical Characteristics

• Amplifier Type: Class D
• Output Power: Mono—50 watt ± 3 watt at 1KHz, 4ohm load, Stereo—25watt + 25watt ± 3watt at 1KHz, 15+15 W, 8 ohm load
• External Power Supply: 100VAC to 240VAC
• Enclosure: Metal
• Operating Temperature: 0 TO +50° C / 10% TO 90% RH, Non-condensing
• Storage Temperature: -25° TO +70° C / 10% TO 90% RH, Non-condensing
• Dimensions: 1.49 x 4.31 x 4.54”
• Approvals: RoHS2, FCC, UL, Plenum
Product Support
Downloads

• Download the manual
• Download the technical specifications