Arlon 4560GTX /4560MTX

Description

Arlon 4560GTX /4560MTX

Arlon dpf 4560GTX/4560MTX.
3 Mil High Gloss/Matte White Calendered Vinyl
• Outdoor durability up to 5 years
• Opaque, grey, permanent adhesive with airegress channels
• Great for POP displays, trade show displays, transit and vehicle decals (flat and soft curved surfaces, only used with DPF 4560GTX)
• Clean removability for up to 2 years
• Arlon suggests using Series 3220 overlaminates
• Print Compatibility: Solvent, Eco-Solvent, UV and Latex (HP approved L25500)

http://www.arlon.com/Objects/Documents/PIBS/DPF%204560GTX-MTX%20PIB_LR.pdf

DPF 4560GTX/MTX Vinyl Film
With X-Scape Technology
Intermediate Calendered Digital Print Pressure Sensitive Vinyl Film
DPF 4560GTX/MTX are made up of a 3-mil (75 micron) white calendered film offered in gloss and matte and coated with bubble
releasing, tinted, permanent pressure-sensitive adhesive. The X-scape system allows installers to achieve speedy installation
while maintaining high enough tack to ensure long term bond. DPF 4560GTX/MTX combines the best of both worlds – ease of
installation and durability of adhesion. Designed for indoor and outdoor promotional graphics, DPF 4560GTX/MTX are made of
a polymeric blend face stock with an air-egress poly-coated liner. The special tinted adhesive system is designed for opacity
to cover existing graphics or dark substrates. DPF 4560GTX/MTX are rated for outdoor durability up to 5 years (unprinted).
APPLICATIONS & FEATURES
• Digital printing with a wide variety of direct print systems.
• Medium-term signage, kiosks, POP displays, real estate signage, transit graphics*, fleet or vehicle markings and decals*.
• Applications where large graphics need to be especially installer friendly for highest speed and least amount of bubbles & wrinkles.
*May only be used with DPF 4560GTX and Series 3220 on flat or slight curves (No more than 2% Distortion)
PERFORMANCE & PHYSICAL DATA
PROPERTY TEST METHODS TYPICAL VALUE
SURFACE FINISH Gloss Meter 60° Reflection Gloss: 80-90%;
Matte: 10-15%
THICKNESS Micrometer, Federal Bench Type 3-mil (75 micron)
TENSILE STRENGTH Tensile Tester 2-in (51 mm) jaw separation;
crosshead speed of 12 in/min. (5.1 mm/s)
13.0 lb/in width 2.3 kg/cm width
ELONGATION Instron Tensile Tester as above ≥ 150%
SHELF LIFE Free from excessive moisture, temperature,
direct sunlight
1 year from factory shipment
APPLICATION
TEMPERATURE RANGE
On clean, dry substrate 50°F to 90°F optimum 10°C to 32°C optimum
SERVICE
TEMPERATURE RANGE
On clean, dry substrate -20°F to 150°F -29°C to -65°C
DIMENSIONAL STABILITY Shrinkage
After 158ºF (70ºC), 48 hours aging
25 mils 0.63 mm
PEEL ADHESION PSTC-1, 15 min, RT 70°F (21°C) 2.5 lbs/in 0.45 kg/cm
LINER RELEASE TLMI Release at 90˚, 300 in/min (760 cm/min) 100 g/2 in 39 g/cmThe following is made in lieu of all warranties expressed or implied:
All statements, technical information and recommendations published by Arlon relating to Arlon
products are based on tests believed to be reliable and within the accuracy of the equipment used
to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes
no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace
any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury,
loss or damage, direct or consequential, arising out of use or the inability to use the product.
Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing
or printing on the product. Before using, user shall determine the suitability of the product for
its intended use. User assumes all risk and liability of every nature in connection therewith. No
statements or recommendations other than those contained in the technical information published
by Arlon shall have force or effect unless contained in an agreement manually signed by the
officers of seller and manufacturer.