Arlon DPF 207 6 Mil Removable Interior Wall Decoration Film

Description

Arlon DPF 207 6 Mil Removable Interior Wall Decoration Film

Arlon DPF 207 6 Mil Removable Interior Wall Decoration Film
• Short to medium-term indoor durability
• Intermediate matte white film with removable pressure-sensitive adhesive and premium moisture-resistant polycoated lay-flat liner
• Clear removable pressure-sensitive adhesive is designed to bond well to substrates such as smooth painted non-vinyl walls
• Great for interior home and retail wall decorations; P.O.P. displays and murals
• Print Compatibility: Solvent, Eco-Solvent and UV

http://www.arlon.com/Objects/Documents/PIBS/DPF%20207%20PIB_LR.pdf

DPF 207 Vinyl Film
Removable Interior Wall Decoration Vinyl Film
DPF 207 is a 6-mil (150 micron) matte white vinyl film with a clear removable pressure-sensitive adhesive. The adhesive is
specially designed to have initial repositionability to substrates such as smooth painted non-vinyl walls without compromising
the ultimate bond. DPF 207 has a premium moisture stable polycoated lay-flat liner that is optimal for printing on a variety of
print systems.
APPLICATIONS & FEATURES
• Home décor
• Retail POP displays
• Interior wall decorations, advertising and murals on smooth painted non-vinyl walls.
• Digital printing with a wide variety of direct print systems, such as solvent, UV, and UV screen.
PERFORMANCE & PHYSICAL DATA
*Standard Terms & Conditions Apply Effective Date 10/11
PROPERTY TEST METHODS TYPICAL VALUE
SURFACE FINISH Gloss Meter 60° Reflection ≤ 15%
THICKNESS Micrometer, Federal Bench Type 6-mil (150 micron)
TENSILE STRENGTH Tensile Tester 2-in (51mm) jaw seperation; crosshead speed
of 12 in/min. (5.1 mm/s)
20 lb/in 3.6 kg/cm
ELONGATION Instron Tensile Tester as above ≥ 125%
SHELF LIFE Free from excessive moisture, temperature, direct sunlight 2 Years
APPLICATION
TEMPERATURE RANGE
On clean, dry substrate 50°F to 90°F 10°C to 30°C
SERVICE
TEMPERATURE RANGE
On clean, dry substrate -20°F to 176°F -29°C to 80°C
DIMENSIONAL STABILITY Shrinkage After 158°F (70°C), 48 hours aging < 25-mils < 0.635 mm
PEEL ADHESION PSTC-1, 15 min, RT 70°F (21°C) 1.1 lb/in 0.20 kg/cm
LINER RELEASE TLMI Release at 90°, 300 in/min (760 cm/min) 45 g/2 in 9 g/cmThe following is made in lieu of all warranties expressed or implied:
All statements, technical information and recommendations published by Arlon relating to Arlon
products are based on tests believed to be reliable and within the accuracy of the equipment used
to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes
no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace
any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury,
loss or damage, direct or consequential, arising out of use or the inability to use the product.
Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing
or printing on the product. Before using, user shall determine the suitability of the product for
its intended use. User assumes all risk and liability of every nature in connection therewith. No
statements or recommendations other than those contained in the technical information published
by Arlon shall have force or effect unless contained in an agreement manually signed by the
officers of seller and manufacturer.