Arlon DPF 2400

Description

Arlon DPF 2400

Arlon DPF 2400
5 Mil White Gloss Reflective with Opaque Permanent Adhesive.
• Outdoor durability up to 7 years for flat surfaces and up to 5 years for irregular surfaces.
• Opaque, permanent adhesive.
• Great for fleet, vehicles, road signs and rail cars.
• Do not wet apply.
• Print compatibility: Solvent, Eco-Solvent.

http://www.sunsupply.com/app/webroot/userfiles/56/File/DPF2400.pdf

DPF 2400 Reflective Vinyl Film
Reflective Digital Print Pressure Sensitive Film
DPF 2400 is a 5-mil printable reflective clean removing vinyl with high initial tack, permanent pressure-
sensitive adhesive. The film conforms well to both flat and irregular surfaces when processed and applied
according to Arlon recommendations. DPF 2400 is rated for outdoor durability up to 7 years (unprinted) for
flat surfaces and up to 5 years (unprinted) for irregular surfaces. Printed durability is dependent on the ink
system used.
AREAS OF USE
■■ Meets the following specifications: DOT FP-85, Section 718; Federal Spec L-S-300C; ASTM-D 4956-89
■■ Digital printing with a wide variety of direct print systems
■■ Motor and railway coaches, fleet and vehicle markings, and any surface requiring reflective vinyl film
PERFORMANCE AND PHYSICAL DATA
PROPERTY TEST METHODS TYPICAL VALUE
SURFACE FINISH Gloss Meter 60° Reflection 80 – 90%
THICKNESS
(including adhesive)
Micrometer, Federal
Bench Type
English 0.061 in Metric 0.15 mm
TENSILE STRENGTH Tensile Tester with 2-in (51 mm)
jaw separation; crosshead
speed of 12 in/min. (5.1 mm/s),
web direction
≥10.0 lb/in width ≥1.8 kg/cm width
ELONGATION Instron Tensile Tester as above ≥110%
SHELF LIFE Free from excessive moisture,
temperature, direct sunlight
2 years from factory shipment
APPLICATION
TEMPERATURE RANGE
On clean, dry substrate 60°F to 90°F optimum 16°C to 32°C optimum
SERVICE
TEMPERATURE RANGE
On clean, dry substrate -65°F to 160°F -54°C to 71°C
HUMIDITY RESISTANCE 1. LS-300 Method 4.4.10
2. ASTM-D4956-89
No appreciable effect
FUNGUS RESISTANCE 1. LS-300 Method 4.4.12
2. ASTM-D4956-89
No appreciable effect
GASOLINE RESISTANCE Film applied to etched aluminum panels 24 hours prior
to testing LS-300 Method 4.4.6
No appreciable effect
PEEL ADHESION PSTC-1, 15 min. RT
70ºF (21º C)
≥4.4 lbs/in ≥0.78 kg/cm
LINEAR RELEASE TLMI Release at 90º, 300 in/min (60 cm/min)
40 g/2 in 8 g/cm
Standard Terms and Conditions Apply Effective 1/09
USA: 2811 S. Harbor Blvd. – Santa Ana, CA 92704 – Tel: 800-854-0361- Fax: 714-540-7190 – Technical Services: 877-275-6698
EUROPE: Badhuisweg 11 2587 CA Den Haag The Netherlands – Tel: +31 (0) 70 354-4311 – Fax: +31 (0) 70 355-7721PRODUCT INFORMATION BULLETIN
TERMS AND
CONDITIONS
The following is made in lieu of all warranties expressed or implied:
All statements, technical information and recommendations published by Arlon, Inc.
relating to Arlon products are based on tests believed to be reliable and within the
accuracy of the equipment used to obtain the specific values. Their accuracy or
completeness is not guaranteed and Arlon, Inc. makes no warranty with regard thereto.
Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the
product proved defective. Seller and manufacturer shall not be liable for injury, loss or
damage, direct or consequential, arising out of use or the inability to use the product.
Nor shall seller or manufacturer be liable for any costs or expenses incurred in the
processing or printing on the product. Before using, user shall determine the
suitability of the product for its intended use. User assumes all risk and liability of
every nature in connection therewith. No statements or recommendations other than
those contained in the technical information published by Arlon, Inc. shall have force
or effect unless contained in an agreement manually signed by the officers of seller
and manufacturer.