Description
Arlon DPF 2400XLP Fleet Grade Reflective Film
Shine light on your fleet markings and vehicle graphics.
DPF 2400XLP is a premium digitally printable reflective film with a light gray permanent adhesive and X-Scape Technology®. DPF 2400XLP has exceptional repositioning capabilities that alleviate bruising, resulting in optimal reflectivity. Equipped with an air egress system, installers will experience an effortless and speedy installation. Graphics will get double the exposure with 24/7 visualization that is bright by day and luminous by night. DPF 2400XLP offers the easiest and most efficient removal to comparable products.
Unique Features
- Exceptional Repositionability, Minimizing Bruising for Optimal Reflectivity
- Speedy Installation with X-Scape Technology®
- Brilliant Graphics by Day, Luminous Graphics by Night
Finish Gloss Adhesive Permanent, Repositionable (Light Grey)
Ink Compatibility Eco-Solvent Solvent UV Latex
DPF 2400XLP is a 5-mil (125 micron) printable reflective vinyl film with bubble releasing, tinted, repositionable, permanent pressure-sensitive adhesive. The film conforms well to both flat and irregular surfaces when processed and applied according to Arlon recommendations. DPF 2400XLP meets or exceeds the following standards for motor vehicles: ISO 7591-1982, DOT FP-85 – Section 718, and ASTM-D 4956-89, Spec. Type 1, Class 1. It is rated for outdoor durability up to 7 years (unprinted) for flat surfaces and up to 5 years (unprinted) for irregular surfaces. Printed durability is dependent on the ink system used.
- For full and partial fleet wraps, vehicle markings and any surface requiring reflective vinyl film.
- Recommended with dry application methods only.
- Speedy Installation with X-Scape Technology®.
- Exceptional Repositionability, Minimizing Bruising for Optimal Reflectivity.
- Enhanced Elongation for Optimum Conformability.
- Brilliant Graphics by Day, Luminous Graphics by Night.
- World-Class Printability – Compatible with Solvent, Latex, and UV.
| Property | Test Methods | Typical Value | |
|---|---|---|---|
| Surface Finish | Gloss Meter 60° Reflection | 80 to 90 Gloss Units | |
| Thickness | Micrometer, Federal Bench Type | 5-mil (125 micron) | |
| Tensile Strength | Tensile Tester with 51 mm jaw separation; crosshead speed of 5.1 mm/s, web direction | ≥ 10.0 lb/in | |
| Elongation | Instron Tensile Tester as above | ≥ 90% | |
| Shelf Life | Ideal Storage Temperature 21°C and 50% relative humidity | 2 years from factory shipment | |
| Application Temperature Range | On clean, dry substrate | 50°F to 100°F | |
| Service Temperature Range | On clean, dry substrate | -40°F to 160°F | |
| Dimensional Stability | 70°C, 48 hours | < 10 mils | |
| Gasoline Resistance | Film applied to etched aluminum panels 24 hours prior to testing LS-300 Method 4.4.6 | No appreciable effect | |
| Peel Adhesion | PSTC-1, 15 min. 21°C on Stainless Steel | ≥ 4.2 lbs/in | |
| Liner Release | TLMI Release at 90°, 60 cm/min | 40 g/2 in | |
Reviews
There are no reviews yet.