Description
Arlon DPF 4500G Gloss 3 Mil clear Calendared Vinyl
DPF 4500G clear
DPF 4500G clear is a 3-mil (75 micron) calendered film with permanent pressure-sensitive adhesive. Designed for indoor and outdoor promotional graphics, DPF 4500G White is made of a calendered facestock with a polycoated liner. The special glossy facestock is designed for applications requiring high gloss or more image pop. DPF 4500G White is rated for outdoor durability up to 5 years (unprinted). Printed durability is dependent on the ink system used.
Recommended Applications
Standard Signage (Permanent)
Display Graphics
Recommended Overlaminate
Series 3420
Unique Features
Multi-Purpose Film, Competitive Price
Premium Print Quality
Face Film Thickness
3-Mil (75 Micron)
Finish
Gloss
Adhesive
Permanent (Clear)
Release Liner
Lay-Flat Polycoated
Durability (Unprinted)
5 Years
Ink Compatibility
Eco-Solvent
Solvent
UV
Latex
Roll Widths
30″ / 48″ / 54″ / 60″
Roll Length(s)
50 Yards
DPF 4500G clear
Intermediate Calendered Film
DPF 4500G White is a 3-mil (75 micron) calendered film with permanent pressure-sensitive adhesive. Designed for indoor and outdoor promotional graphics, DPF 4500G White is made of a calendered facestock with a polycoated liner. The special glossy facestock is designed for applications requiring high gloss or more image pop. DPF 4500G White is rated for outdoor durability up to 5 years (unprinted). Printed durability is dependent on the ink system used.
Applications & Features
Digital printing with a wide variety of direct print systems.
Promotional and merchandising graphics.
Medium-term signage, kiosks, POP displays and real estate signage.*
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 80 to 90 Gloss Units
Thickness Micrometer, Federal Bench Type 3-mil (75 micron)
Tensile Strength Tensile Tester 2-in (51 mm) jaw separation; crosshead speed of 12 in/min. (5.1 mm/s), web direction 13 lb/in 2.3 kg/cm
Elongation Instron Tensile Tester as above ? 150%
Shelf Life (In Box) Ideal storage temperature 70°F (21°C) and 50% relative humidity 1 year from factory shipment
Application Temperature Range On clean, dry substrate 60°F to 90°F optimum 16°C to 32°C optimum
Service Temperature Range On clean, dry substrate -20°F to 150°F -29°C to 65°C
Dimensional Stability 158°F (70°C), 48 hours ? 0.025 in 0.64 mm
Peel Adhesion PSTC-1, 15 min, 70°F (21°C) 3.5 lb/in 0.63 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760 cm/min) 44 g/2 in 0.017 kg/2 cm
NOTE: For best print quality, Arlon recommends a curing temperature up to 230°F (110°C)
* Recommended to test compatibility on raw & primed MDO prior to installation due to variation in substrate properties
Terms & Conditions
The following is made in lieu of all warranties expressed or implied:
All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Sellers and manufacturers only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.
Reviews
There are no reviews yet.