Arlon DPF 4500GX Intermediate Calendered Film

Description

Arlon DPF 4500GX Intermediate Calendered Film
DPF 4500GX
DPF 4500GX is an easy to install solution for your short to medium-term permanent applications. This film is available with a clear, permanent adhesive and LX (Low Profile) X-Scape Technology® which allows for easy installation and long-term bond. DPF 4500GX is the best value air-egress vinyl for every day sign applications.

Recommended Applications
Standard Signage (Permanent)
Display Graphics
Window Graphics
Recommended Overlaminate
Series 3420

Unique Features
Easy to Apply with X?Scape Technology®
Multi-Purpose Film, Competitive Price
Premium Print Quality
Face Film Thickness
3-Mil (75 Micron)
Finish
Gloss
Adhesive
Permanent (Clear)
Release Liner
Lay-Flat Polycoated with Low Profile X?Scape Technology®
Durability (Unprinted)
5 Years
Ink Compatibility
Eco-Solvent
Solvent
UV
Latex
Roll Widths
30” / 54” / 60”
Roll Length(s)
50 Yards
DPF 4500GX
Intermediate Calendered Film With Low Profile X?Scape Technology®
DPF 4500GX is constructed of a 3-mil (75 micron) white calendered film offered in gloss and coated with clear bubble releasing, permanent pressure-sensitive adhesive. Low Profile X-Scape Technology® allows installers to achieve speedy installation while maintaining high enough tack to ensure long-term bond. The polymeric facestock allows for vibrant prints combined with ease of application for short and medium term graphics. DPF 4500GX is rated for outdoor durability up to 5 years (unprinted). Printed durability is dependent on the ink system used.

Applications & Features
Digital printing with a wide variety of direct print systems.
Short to medium-term signage, POP displays, kiosks and tradeshows.
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 80 to 90 Gloss Units
Thickness Micrometer, Federal Bench Type 3-mil (75 micron)
Tensile Strength Tensile Tester 2-in (51 mm) jaw seperation; crosshead speed of 12 in/min. (5.1 mm/s) 1 13.0 lb/in width 2 2.3 kg/cm width
Elongation Instron Tensile Tester as above ? 150%
Shelf Life (In Box) Free from excessive moisture, temperature, direct sunlight 1 year from factory shipment
Application Temperature Range On clean, dry substrate 50°F to 90°F 10°C to 32°C 50°F to 90°F 10°C to 32°C 10°C to 32°C
Service Temperature Range On clean, dry substrate -20°F to 150°F -29°C to 65°C -20°F to 150°F -29°C to 65°C
Dimensional Stability Shrinkage After 158°F (70°C), 48 hours aging 25 mils 635 micron 25 mils 635 micron 635 micron
Peel Adhesion PSTC-1, 15 min, RT 70°F (21°C) 2.5 lbs/in 0.45 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760 cm/min) 60 g/2 in 11.81 g/cm
Terms & Conditions
The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.
.