Cart

Arlon DPF 4500MLX Matte Calendered Film

$152.50$306.25

Select Size to see price.

Description

Arlon DPF 4500GLX/MLX Intermediate Calendered Film
DPF 4500GLX / MLX
A bright white, gloss film with built-in opacity means that you can deliver your message with vivid graphics at the right price for your budget. Arlon’s bubble-releasing X-Scape Technology® will speed along the installation process and ensure a permanent, long-term bond to the substrate. DPF 4500GLX / MLX is a lasting, quality product with consistent print quality at an unbeatable value.

Recommended Applications
Short to Medium-Term Signage
Real Estate Signage
POP / Trade Show Graphics
Kiosks
Recommended Overlaminate
Series 3420

Unique Features
Easy to Apply with X?Scape Technology®
Multi-Purpose Film, Competitive Price
Tinted Adhesive for Added Opacity
Face Film Thickness
3-Mil (75 Micron)
Finish
Gloss
Matte
Adhesive
Permanent (Light Gray)
Release Liner
Lay-Flat Polycoated with Low Profile X?Scape Technology®
Durability (Unprinted)
5 Years
Ink Compatibility
Eco-Solvent
Solvent
UV
Latex
Roll Widths
30″ / 48″* / 54″ / 60″
Roll Length(s)
50 Yards
DPF 4500GLX / MLX
Intermediate Calendered Film With Low Profile X?Scape Technology®
DPF 4500GLX / MLX is constructed of a 3-mil (75 micron) white calendered film offered in gloss or matte and coated with tinted, bubble releasing, permanent pressure-sensitive adhesive. The LX (Low Profile) X-Scape Technology® allows installers to achieve speedy installation while maintaining high enough tack to ensure long-term bond. The polymeric facestock allows for vibrant prints combined with ease of application for short and medium-term graphics. DPF 4500GLX / MLX is rated for outdoor durability up to 5 years (unprinted). Printed durability is dependent on the ink system used.

Applications & Features
Digital printing with a wide variety of direct print systems
Promotional and merchandising graphics
Medium-term signage, kiosks, POP displays and real estate signage*
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 80 to 90 Gloss Units (Gloss) 10 to 15 Gloss Units (Matte)
Thickness Micrometer, Federal Bench Type 3-mil (75 micron)
Tensile Strength Tensile Tester 2-in (51mm) jaw seperation; crosshead speed of 12 in/min. (5.1 mm/s) 13 lb/in 2.3 kg/cm
Elongation Instron Tensile Tester as above ? 170%
Shelf Life (In Box) Ideal Storage Temperature 70°F (21°C) and 50% relative humidity 1 year from factory shipment
Application Temperature Range On clean, dry substrate 50°F to 90°F 10°C to 32°C
Service Temperature Range On clean, dry substrate -20°F to 150°F -29°C to 65°C
Dimensional Stability Shrinkage After 158°F (70°C), 48 hours aging 0.025 in 0.64 mm
Peel Adhesion PSTC-1, 15 min, 70°F (21°C) 2.5 lb/in 0.45 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760 cm/min) 60 g/2 in 11.81 g/cm
* Recommended to test compatibility on raw & primed MDO prior to installation due to variation in substrate properties
Terms & Conditions
The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer
.

Additional information

Adhesive Type

Brands

Color

Core-size

Surface Finish

Ink Type

, , ,

Media Type

Product Type

Size

, ,

Thickness

Reviews

There are no reviews yet.

Be the first to review “Arlon DPF 4500MLX Matte Calendered Film”

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations