Description
Arlon DPF 4500MT Matte 3 Mil Calendered Film
DPF 4500GT / MT
DPF 4500GT / MT is a 3-mil (75 micron) white calendered film offered in a gloss and matte finish with tinted, permanent pressure-sensitive adhesive. Designed for indoor and outdoor promotional graphics, DPF 4500GT / MT is made of a calendered facestock with a lay-flat polycoated liner. The special light gray adhesive system is designed for opacity to directly cover existing graphics or dark substrates. DPF 4500GT / MT is rated for outdoor durability up to 5 years (unprinted). Printed durability is dependent on the ink system used.
Recommended Applications
Standard Signage (Permanent)
Display Graphics
Recommended Overlaminate
Series 3210
Series 3220
Series 3420
Unique Features
Multi-Purpose Film, Competitive Price
Premium Print Quality
Tinted Adhesive for Added Opacity
Face Film Thickness
3-Mil (75 Micron)
Finish
Gloss
Matte
Adhesive
Permanent (Light Gray)
Release Liner
Lay-Flat Polycoated
Durability (Unprinted)
5 Years
Ink Compatibility
Eco-Solvent
Solvent
UV
Latex
Roll Widths
30 / 48″ / 54 / 60
Roll Length(s)
50 Yards
DPF 4500GT / MT
Intermediate Calendered Film
DPF 4500GT/MT is a 3-mil (75 micron) white calendered film offered in gloss & matte with tinted, permanent pressure- sensitive adhesive. Designed for indoor and outdoor promotional graphics, DPF 4500GT/MT is made of a calendered face stock with a polycoated liner. The light gray adhesive is designed to ensured enough opacity for covering up existing graphics or dark substrates. DPF 4500GT/MT is rated for outdoor durability up to 5 years (unprinted). Printed durability is dependent on the ink system used.
Applications & Features
Digital printing with a wide variety of direct print systems
Promotional and merchandising graphics
Medium-term signage, kiosks, POP displays and real estate signage*
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 80 to 90 Gloss Units (Gloss)
10 to 15 Gloss Units (Matte)
Thickness Micrometer, Federal Bench Type 3-mil (75 micron)
Tensile Strength Tensile Tester 2-in (51 mm) jaw seperation; crosshead speed of 12 in/min. (5.1 mm/s), web direction 13.0 lb/in width 2.3 kg/cm
Elongation Instron Tensile Tester as above ? 170%
Shelf Life (In Box) Free from excessive moisture, temperature, direct sunlight 1 year from factory shipment
Application Temperature Range On clean, dry substrate 50°F to 90°F 16°C to 32°C
Service Temperature Range On clean, dry substrate -20°F to 150°F -29°C to 65°C
Dimensional Stability 158°F (70°C), 48 hours 25-mil 0.63 mm
Peel Adhesion PSTC-1, 15 min, RT 70°F (21°C) 2.5 lbs/in 0.45 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760 cm/min) 30 g/2 in 12 g/cm
* Recommended to test compatibility on raw & primed MDO prior to installation due to variation in substrate properties
Terms & Conditions
The following is made in lieu of all warranties expressed or implied:
All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Sellers and manufacturers only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.
Reviews
There are no reviews yet.