Arlon DPF 510-HT 3.2 Mil Gloss Pressure-Sensitive High Tack Vinyl Film

Description

Arlon DPF 510-HT Pressure-Sensitive High Tack Vinyl Film
DPF 510 High Tack
DPF 510 High Tack delivers an exceptional, vibrant print quality at an unbeatable value for your short-term applications. The high tack permanent adhesive provides a reliable and durable application for your multi-purpose signage. The two sided, lay-flat polycoated liner ensures that the vinyl will not curl under heavy heat from printers. DPF 510 High Tack has consistent ink receptivity across most print systems. Combine DPF 510 High Tack with Series 3510 overlaminate for an easier installation and abrasion resistance.

Recommended Applications
Standard Signage (Permanent)
Display Graphics
Recommended Overlaminate
Series 3510
Unique Features
High Tack Adhesive for Multi-Purpose Signage Applications
Exceptional, Vibrant Print
Two Sided, Lay-Flat Polycoated Liner
Face Film Thickness
3.2-mil (80 micron)
Finish
Gloss
Matte
Adhesive
DPF 510G-HT
DPF 510M-HT:
Permanent
(Clear)*

DPF 510GT-HT
DPF 510MT-HT
Permanent
(Light Gray)*
Release Liner
Lay-Flat Polycoated
Durability (Unprinted)
3 Years
Ink Compatibility
Eco-Solvent
Solvent
Latex
Roll Widths
54” / 60”
Roll Length(s)
50 Yards
DPF 510 High Tack
Digital Print Pressure-Sensitive High Tack Vinyl Film
DPF 510 High Tack is a 3.2-mil (80 micron) calendered film with a clear or tinted, solvent-based, pressure-sensitive, high tack adhesive. The two-sided polycoated liner provides excellent lay-flat properties. The high tack adhesive provides superior adhesion for multi-purpose signage applications. DPF 510 High Tack is available in a white gloss finish (DPF 510G-HT or DPF 510GT-HT) and white matte finish (DPF 510M-HT or DPF 510MT-HT). DPF 510 High Tack is rated for outdoor durability up to 3 years (unprinted). Printed durability is dependent on the ink system used.

Applications & Features
Short-term promotional and display graphics.
Barricade graphics, tradeshow signage or construction graphics.
Excellent printability on Eco-Solvent, Solvent, and Latex print systems.
Ideal for interior and exterior applications on flat surfaces.
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 70 to 90 Gloss Units (Gloss) Up to 30 Gloss Units (Matte)
Thickness Micrometer, Federal Bench Type 3.2-mil (80 micron)
Tensile Strength Tensile Tester with 2-in (51 mm) jaw separation; crosshead speed of 12 in/min. (5.1 mm/s), web direction ? 10.0 lb/in ? 1.8 kg/cm
Elongation Instron Tensile Tester as above ? 150%
Shelf Life (In Box) Ideal Storage Temperature 70°F (21°C) and 50% relative humidity 1 year from factory shipment
Application Temperature Range On clean, dry substrate 50°F to 90°F 10°C to 32°C
Service Temperature Range On clean, dry substrate -20°F to 150°F -29°C to 65°C
Dimensional Stability 158°F (70°C), 48 hours ? 50-mil ? 1.27mm
Peel Adhesion PSTC-1, 15 min, 70°F (21°C) ? 4 lb/in ? 0.71 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760 cm/min) 35 g/2 in 7.0 g/cm
Standard Terms & Conditions Apply
Terms & Conditions
The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.