Arlon DPF 510GT Gloss 3.2 Mil Calendered Promotional Permanent Vinyl

Description

Arlon DPF 510GT Gloss 3.2 Mil Calendered Promotional Permanent Vinyl
DPF 510GT/MT
If you’re looking for the ideal short-term promotional film, look no further.

DPF 510GT/MT delivers an exceptional, vibrant print quality at an unbeatable value for your short-term applications. The high tack permanent adhesive provides a reliable and durable application for your multi-purpose signage. The two sided, lay-flat polycoated liner ensures that the vinyl will not curl under heavy heat from printers.

DPF 510GT/MT has consistent ink receptivity across most print systems. Combine DPF 510GT/MT with Series 3510 overlaminate for an easier installation and abrasion resistance.

Recommended Applications
Standard Signage (Permanent)
Display Graphics
Recommended Overlaminate
Series 3510
Unique Features
High Tack Adhesive for Multi-Purpose Signage Applications
Exceptional, Vibrant Print
Two Sided, Lay-Flat Polycoated Liner
Face Film Thickness
100 microns
Finish
Gloss
Matte
Adhesive
Permanent (Light Grey)
Release Liner
Lay-Flat Polycoated
Durability (Unprinted)
3 Years
Ink Compatibility
Eco-Solvent
Solvent
Latex
Roll Widths
1.37m
1.52m
Roll Length(s)
45.72m
DPF 510GT/MT
Digital Print Pressure-Sensitive Vinyl Film
DPF 510GT/MT is a 100 microns monomeric film with a gray, solvent-based pressure-sensitive adhesive.

The two-sided polycoated liner provides excellent lay-flat properties. The high-quality adhesive provides far superior adhesion and cohesion properties than water-based adhesive. DPF 510GT/MT is available in a white gloss finish.

DPF 510GT/MT is rated for outdoor durability up to 3 years (unprinted). Printed durability is dependent on the ink system used.

Applications & Features
Short-term promotional and display graphics, including kiosks, POP displays and real estate signage
Excellent printability on Eco-Solvent, Solvent and Latex print systems
Ideal for interior and exterior applications on flat surfaces
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection Matte: Up to 30 Gloss Units
Gloss: 70 to 90 Gloss Units
Thickness Micrometer, Federal Bench Type 100 microns
Tensile Strength Tensile Tester with 51 mm jaw separation; crosshead speed of 5.1 mm/s, web direction ? 2.7 kg/cm
Elongation Instron Tensile Tester as above ? 200%
Shelf Life (In Box) Ideal Storage Temperature 21°C and 50% relative humidity 1 year from factory shipment
Application Temperature Range On clean, dry substrate 10°C to 32°C
Service Temperature Range On clean, dry substrate -29°C to 65°C
Dimensional Stability 70°C, 48 hours 0.25 mm
Peel Adhesion PSTC-1, 15 min, 21°C 25 mm
Liner Release TLMI Release at 90°, 760 cm/min 7.9 g/cm
TERMS & CONDITIONS
The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.