Description
DPF 510GTX/MTX Gloss
is a 3.2-mil (80 micron) calendered film with a tinted, solvent-based pressure-sensitive adhesive and
a low profile air-egress, lay-flat liner. X-Scape Technology® enables trapped air to escape through the air channels for
an speedy installation and a smooth finished graphic. The high-quality adhesive provides far superior adhesion and
cohesion properties than water-based adhesive. DPF 510GTX/MTX is available in a gloss and matte finish. DPF 510 is
rated for outdoor durability up to 3 years (unprinted). Printed durability is dependent on the ink system used.
APPLICATIONS & FEATURES
• X-Scape Technology® for easy installation and a smooth finish
• Short-term promotional and display graphics
• Excellent printability on Eco-Solvent, Solvent and Latex print systems.
• Ideal for interior and exterior applications on flat surfaces.
Performance & Physical Data
| Property | Test Methods | Typical Value | |
|---|---|---|---|
| Adhesion | |||
| Surface Finish | Gloss Meter 60° Reflection | 70 to 90 Gloss Units (Gloss) Up to 30 Gloss Units (Matte) |
|
| Thickness | Micrometer, Federal Bench Type | 3.2-mil (80 micron) | |
| Tensile Strength | Tensile Tester with 2-in (51 mm) jaw separation; crosshead speed of 12 in/min. (5.1 mm/s), web direction | ≥ 12 lb/in | ≥ 2.14 kg/cm |
| Elongation | Instron Tensile Tester as above | ≥ 150% | |
| Shelf Life | Ideal Storage Temperature 70°F (21°C) and 50% relative humidity | 1 year from factory shipment | |
| Application Temperature Range | On clean, dry substrate | 50°F to 90°F | 10°C to 32°C |
| Service Temperature Range | On clean, dry substrate | -20°F to 150°F | -29°C to 65°C |
| Dimensional Stability | 158°F (70°C), 48 hours | 10-mil | 0.25 mm |
| Peel Adhesion | PSTC-1, 15 min, 70°F (21°C) | ≥ 1.50 lb/in | ≥ 0.26 kg/cm |
| Liner Release | TLMI Release at 90°, 300 in/min (760 cm/min) | 70 g/2 in | 13.8 g/cm |