Arlon DPF 510M Matte 3.2 Mil Calendered Promotional Permanent Vinyl

Description

Arlon DPF 510M Matte 3.2 Mil Calendered Promotional Permanent Vinyl
DPF 510
If you’re looking for the ideal short-term promotional film, look no further.

DPF 510 has a two sided, lay-flat polycoated liner that prevents curling under heavy heat from printers, so you can expect nothing but the best ink receptivity in the market for a budget-friendly price point. The solvent-based adhesive will give the initial tack you need, forming a permanent bond for lasting and vibrant impact. Extend the life of your print with Series 3510 overlaminate.

Recommended Applications
Standard Signage (Permanent)
Display Graphics
Recommended Overlaminate
Series 3510
Unique Features
Lay-Flat Polycoated Liner
Consistent Print Quality
Solvent Based Adhesive
Face Film Thickness
3.2-Mil (80 Micron)
Finish
Gloss
Matte
Adhesive
DPF 510G / M: Permanent (Clear)
DPF 510GT / MT: Permanent (Light Gray)
Release Liner
Lay-Flat Polycoated
Durability (Unprinted)
3 Years
Ink Compatibility
Eco-Solvent
Solvent
Latex
Roll Widths
30″* / 54″ / 60″
Roll Length(s)
50 Yards
DPF 510
Calendered Promotional Permanent Film
DPF 510 is a 3.2-mil (80 micron) calendered film with a clear or tinted, solvent-based pressure-sensitive adhesive.
The two-sided polycoated liner provides excellent lay-flat properties. The high-quality adhesive provides far superior adhesion and cohesion properties than water-based adhesive. DPF 510 is available in a white gloss and white matte finish. DPF 510 is rated for outdoor durability up to 3 years (unprinted). Printed durability is dependent on the ink system used.

Applications & Features
Short-term promotional and display graphics, including kiosks, POP displays and real estate signage.
Excellent printability on Eco-Solvent, Solvent and Latex print systems.
Ideal for interior and exterior applications on flat surfaces.
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 70 to 90 Gloss Units (Gloss) Up to 30 Gloss Units (Matte)
Thickness Micrometer, Federal Bench Type 3.2-mil (80 micron)
Tensile Strength Tensile Tester with 2-in (51 mm) jaw separation; crosshead speed of 12 in/min. (5.1 mm/s), web direction ? 15.0 lb/in ? 2.7 kg/cm
Elongation Instron Tensile Tester as above ? 200%
Shelf Life (In Box) Ideal Storage Temperature 70°F (21°C) and 50% relative humidity 1 year from factory shipment
Application Temperature Range On clean, dry substrate 50°F to 90°F 10°C to 32°C
Service Temperature Range On clean, dry substrate -20°F to 150°F -29°C to 65°C
Dimensional Stability 158°F (70°C), 48 hours 10-mil 0.25 mm
Peel Adhesion PSTC-1, 15 min, 70°F (21°C) ? 2.00 lb/in ? 0.36 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760 cm/min) 40 g/2 in 7.9 g/cm
Terms & Conditions
The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.