Arlon DPF 510MTR Matte 3.2 Mil Calendered Promotional Tinted Removable Adhesive Vinyl

Description

Arlon DPF 510MTR Matte 3.2 Mil Calendered Promotional Tinted Removable Adhesive Vinyl
DPF 510GTR/MTR
Just because you apply a film to a substrate doesn’t mean that you want it to stay there forever. We understand. That’s why we designed the adhesive on DPF 510GTR / MTR Removable that features a quick and easy removal of up to one year in either dry or wet applications.

High heat from printers is no match for the two sided, lay-flat polycoated liner that prevents DPF 510GTR / MTR from curling. Brilliant print quality, an unbeatable value, and easy removability make DPF 510GTR / MTR the best option for short-term, promotional projects.

Preserve your graphic print with Series 3510 overlaminate.

Recommended Applications
Standard Signage (Removable)
Display Graphics
Window Graphics
Recommended Overlaminate
Series 3510
Unique Features
Exceptional, vibrant print
Consistent performance with high heat printers
High-quality clean removing adhesive
Face Film Thickness
80 microns
Finish
Gloss
Matte
Adhesive
Removable, Low Tack (Light Grey)
Release Liner
Lay-Flat Polycoated
Durability (Unprinted)
3 Years
Ink Compatibility
Eco-Solvent
Solvent
Latex
Roll Widths
1.37m
1.52m
Roll Length(s)
45.72m
DPF 510GTR/MTR
Calendered Promotional Removable Film
DPF 510GTR/MTR is an 80 micron calendered film with a tinted, solvent-based pressure-sensitive removable adhesive. The two-sided polycoated liner provides excellent lay-flat properties. DPF 510GTR/MTR is available in a white gloss (DPF 510GTR) and white matte finish (DPF 510MTR).

DPF 510 is rated for outdoor durability up to 3 years (unprinted). Printed durability is dependent on the ink system used.

Applications & Features
Low tack adhesive is removable up to one year
Short-term promotional and display graphics, including windows, decals, tradeshow and POP displays
Excellent printability on Eco-Solvent, Solvent and Latex print systems
Ideal for interior and exterior applications on flat surfaces
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection Matte: Up to 30 Gloss Units
Gloss: 70 to 90 Gloss Units
Thickness Micrometer, Federal Bench Type 80 microns
Tensile Strength Tensile Tester with 51 mm jaw separation; crosshead speed of 5.1 mm/s, web direction ? 1.8 kg/cm
Elongation Instron Tensile Tester as above ? 200%
Shelf Life (In Box) Ideal Storage Temperature 21°C and 50% relative humidity 1 year from factory shipment
Application Temperature Range On clean, dry substrate 10°C to 32°C
Service Temperature Range On clean, dry substrate -29°C to 65°C
Dimensional Stability 70°C, 48 hours ? 1.00mm
Peel Adhesion PSTC-1, 15 min, 21°C ? 0.09 kg/cm
Liner Release TLMI Release at 90°, 760 cm/min 21.7 g/cm
TERMS & CONDITIONS
The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.