Arlon DPF 6000RP Clear Premium Clear Cast Film

Description

Arlon DPF 6000RP Clear Premium Clear Cast Film
DPF 6000RP Clear
DPF 6000RP Clear is specifically formulated for Eco-Solvent, Solvent and UV printers to give the ultimate image resolution and to be quick drying. This film features a face stock with superior conformability and an adhesive that facilitates easy installation. With an outdoor durability of 7 years unprinted, DPF 6000RP Clear is a perfect product for all your window application needs. A variety of sizes are provided to meet most applications.

Recommended Applications
Backlit Signage
Standard Signage (Permanent)
Display Graphics
Second Surface Signage
Window Graphics
Vehicle Graphics (Full, Partial)
Fleet Graphics
Recommended Overlaminate
Series 3200
Series 3210
Series 3220
Series 3350
Unique Features
Conformable to Deep Channels
All Purpose Applications, Including Window Graphics
Exceptional Print Quality
Face Film Thickness
2-Mil (50 Micron)
Finish
Gloss
Adhesive
Permanent (Clear)
Release Liner
Lay-Flat Polycoated
Durability (Unprinted)
7 Years
Ink Compatibility
Eco-Solvent
Solvent
UV
Latex
Roll Widths
30” / 48” / 54” / 60”
Roll Length(s)
50 Yards
DPF 6000RP Clear
Premium Clear Cast Film
DPF 6000RP Clear is a 2-mil (50 micron) gloss clear cast film with clear, high tack, permanent pressure-sensitive adhesive. Designed for large format graphics, DPF 6000RP Clear is made of premium quality cast face stock with a special lay-flat liner. The special adhesive system is designed to provide easy installation. DPF 6000RP Clear is rated for outdoor durability up to 7 years (unprinted). Printed durability is dependent on the ink system used.

Applications & Features
Digital printing with a wide variety of direct print systems.
Great for window applications and second surface signs.
Used in conjunction with Series 3200, Series 3220, or Series 3350 overlaminates.
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 70% to 90%
Thickness Micrometer, Federal Bench Type 2-mil (50 micron)
Tensile Strength Tensile Tester with 2-in (51 mm) jaw separation; crosshead speed of 12 in/min. (5.1 mm/s), web direction ? 4.5 lb/in width ? 0.8 kg/cm width
Elongation Instron Tensile Tester as above ? 150%
Shelf Life Free from excessive moisture, temperature, direct sunlight 1 year from factory shipment
Application Temperature Range On clean, dry substrate (flat) 40°F to 100°F optimum 4.4°C to 38°C
Application Temperature Range On clean, dry substrate (corrugated with rivets and channels) 60°F to 100°F optimum 15°C to 38°C optimum
Service Temperature Range On clean, dry substrate -40°F to 175°F -40°C to 79°C
Dimensional Stability 158°F (70°C), 48 hours 0.015 in 0.38 mm
Peel Adhesion PSTC-1, 15 min, RT 70°F (21°C) ? 2.5 lbs/in ? 0.45 kg/cm
Liner Release TLMI Release at 90?, 300 in/min (760 cm/min) 30 g/2 in 12 g/cm
Optimum Performance
Actual weathering durability depends on surface preparation, surface maintenance and exposure conditions. Successful weather resistance is characterized by the retention of legibility. DPF 6000RP Clear will resist weathering best when applied to vertical or upper outboard angles. Horizontal angles, such as hood and auto roof surfaces, will deteriorate more quickly than vertical. This is due to increased exposure to sun and moisture, as well as high deposition of dirt and atmospheric contaminants. Arlon does not recommend its film for horizontal or close horizontal applications. Use heat and/or chemical when removing image from vehicle (see Installer Handbook for details).

Terms & Conditions
The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.