Arlon DPF 9000 Aatin White Engineered Vinyl 3.5 Mil

Description

Arlon DPF 9000 Aatin White Engineered Vinyl 3.5 Mil
DPF 9000
DPF 9000 is a satin white, engineered vinyl with a medium initial tack, permanent adhesive. This digital film for solvent-based printers is recommended for applications where the graphic is exposed to high heat, solvents or petrochemical-based products such as gas pump skirts and vehicle wraps. Its lay-flat, polycoated liner makes printing with solvent-based inks and wet applications even easier. The film features superior scratch and abrasion resistance and good dimensional stability with a durability rating of 7 years unprinted.

Recommended Applications
Gasoline Pumps
Fleet Markings
Boat Decals
Recommended Overlaminate
Series 3220
Series 3420
Unique Features
Meets Requirements and Guidelines of Transportation and Automotive Industries
Solvent and Heat Resistant
Heavy Duty Industrial Grade Film for Abrasion Resistant
Face Film Thickness
3.5-Mil (90 Micron)
Finish
Satin
Adhesive
Permanent (Clear)
Release Liner
Lay-Flat Polycoated
Durability (Unprinted)
7 Years
Ink Compatibility
Eco-Solvent
Solvent
UV
Latex
Roll Widths
30″ / 49″ / 54″ / 60″
Roll Length(s)
50 Yards
DPF 9000
Industrial Grade Heat & Solvent Resistant Calendered Film
DPF 9000 is a 3.5-mil (90 micron) satin white, high-tensile, polyvinyl chloride lm with medium-tack, repositionable, permanent pressure-sensitive adhesive. Designed for outdoor graphics, DPF 9000 is made of 100% polymeric face
stock with a special lay- at liner. The special adhesive system is designed to be solvent and heat resistant.
DPF 9000 is designed to meet the marketing requirements and speci cations of the transportation and automotive industries. The lm conforms well to at surfaces with slight contours when processed and applied according to Arlon recommendations. DPF 9000 is rated for outdoor durability up to 7 years (unprinted). Printed durability is dependent on the ink system used.

Applications & Features
Digital printing with a wide variety of direct print systems.
Fleet markings, decorations for railway car, bus, boat, and recreational vehicle.
Gas pump skirts.
Motorcycle markings requiring Bake Cycle Curing.
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 40% to 60%
Thickness Micrometer, Federal Bench Type 3.5-mil (90 micron)
Tensile Strength Tensile Tester with 2-in (51 mm) jaw separation; crosshead speed of 12 in/min. (5.1 mm/s), web direction 13.0 lb/in width 2.3 kg/cm width
Elongation Instron Tensile Tester as above 100%
Shelf Life Free from excessive moisture, temperature, direct sunlight 1 year from factory shipment
Application Temperature Range On clean, dry substrate (flat) 40°F to 100°F optimum 4.4°C to 38°C optimum
Service Temperature Range On clean, dry substrate -65°F to 225°F -54°C to 107°C
Dimensional Stability 158°F (70°C), 48 hours 20 mils 0.50 mm
Peel Adhesion PSTC-1, 15 min, RT 70°F (21°C) 2.5 lbs/in 0.45 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760 cm/min) 30 g/2 in 12 g/cm
Terms & Conditions
The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the speci c values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the of cers of seller and manufacturer.