Arlon Series 3220 Premium Cast Satin Overlaminate

Description

Arlon Series 3220 Premium Cast Satin Overlaminate
Series 3220
Multiple Finishes, Consistent Conformable Performance
When has too many options ever been a bad thing? Series 3220 is a premium cast protective overlaminate available in Gloss, Matte, Luster or Satin finish to help customize the look of your graphic. With UV inhibitors protecting your graphic from weathering and added dimensional stability, you’ll have an easier graphic installation and clean removal at the end.

Recommended Vinyl
DPF 6100XLP
DPF 6000XRP
DPF 6000RP White
DPF 6500
DPF 6700
DPF 4600LX
DPF 4500GT / MT
DPF 8000™ Ultra Tack
DPF 9000
DPF 4000
DPF 4300
Unique Features
Conformable Overlaminate Available in Multiple Finishes to Customize your Graphics
Compatible with Most Digitally Printable Products
Added UV Stabilizers to Enhance Life of Graphics
Face Film Thickness
2-Mil (50 Micron)
Finish
Gloss
Matte
Satin
Luster
Adhesive
Permanent (Clear)
Release Liner
Clay Coated
Durability (Unprinted)
7 Years
Roll Widths
30” / 48” / 54” / 60”
Roll Length(s)
20 Yards
50 Yards
Series 3220
Premium Cast Overlaminate
Series 3220 overlaminates are constructed of 2-mil (50 micron) cast vinyl film with clear, permanent pressure-sensitive adhesive. Designed to protect and prolong the life of printed images, Series 3220 extends the life of the graphics by 2 years. Series 3220 is rated for outdoor durability up to 7 years. This product is not designed to be used as an optically clear window film.

Applications & Features
Protective Overlaminate for DPF 6100XLP, DPF 6000XRP, DPF 6000RP White, DPF 6500, DPF 6700, DPF 4600LX, DPF 4500GT/MT, DPF 8000 White, DPF 9000, DPF 4000 and DPF 4300.
Long-term signage, kiosks, POP displays, fleet and vehicle applications.
Recommended dry time for printed images is 24-48 hours prior to laminating.
UV inhibitors to protect and extend the life of your printed graphic.
Arlon overlaminate film is designed to be laminated cold without any heat.
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 80 to 90 Gloss Units (Gloss)
55 to 85 Gloss Units (Luster)
20 to 30 Gloss Units (Satin)
1.5 to 10 Gloss Units (Matte)
Thickness Micrometer, Federal Bench Type 2-mil (50 micron)
Tensile Strength Tensile Tester with 2-in (51 mm) jaw separation; crosshead speed of 12 in/min, (5.1 mm/s), web direction ? 4.5 lb/in width ? 0.8 kg/cm width
Elongation Instron Tensile Tester as above ? 150%
Shelf Life (In Box) Ideal storage temperature 21°C and 50% relative humidity 2 years from factory shipment
Application Temperature Range On clean image 40°F to 100°F 4.4°C to 38°C
Service Temperature Range On clean, dry substrate -40°F to 175°F -40°C to 79°C
Dimensional Stability Shrinkage After 158°F (70°C), 48 hours 5-mil 0.12 mm
Peel Adhesion PSTC-1, 15 min, 70°F (21°C) 4.35 lb/in 0.78 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760 cm/min) 70 g/2in 13.78 g/cm
Standard Terms & Conditions Apply
Optimum Performance
Actual weathering durability depends on surface preparation, surface maintenance and exposure conditions. Successful weather resistance is characterized by the retention of legibility.

Series 3220 will resist weathering best when applied to vertical or upper outboard angles. Horizontal angles, such as hood and auto roof surfaces, will deteriorate more quickly than vertical. This is due to increased exposure to sun and moisture, as well as continued high deposition of dirt and atmospheric contaminants. Arlon does not recommend its film for horizontal or close horizontal applications.