Arlon Series 3270 Premium Cast Satin Overlaminate

Description

Arlon Series 3270 Premium Cast Satin Overlaminate
Series 3270
Premium Protection
Providing conformability and dimensional stability to your installation, Series 3270 overlaminate will also shield your graphics from outdoor elements. Installation into deep channels, rivets, compound curves or onto a smooth wall, Series 3270 will offer lasting performance and extend the life of your graphic by up to 2 years. Available in a Gloss, Matte and Satin finish making your graphics pop.

Recommended Vinyl
SLX™ Cast Wrap
DPF 6100XLP
DPF 6000XRP
DPF 6000RP White
Unique Features
Added Dimensional Stability for Easy Installation
Superior Gloss Consistency
Added UV Stabilizers to Enhance Life of Graphics
Face Film Thickness
2-Mil (50 Micron)
Finish
Gloss
Matte
Satin
Adhesive
Permanent (Clear)
Release Liner
Clay Coated
Durability (Unprinted)
7 Years
Roll Widths
30″ / 48″ / 54″ / 60″
Roll Length(s)
50 Yards
Series 3270
Premium Cast Overlaminate
Series 3270 overlaminate is constructed of 2-mil (50 micron) cast vinyl film with clear, permanent pressure-sensitive adhesive. Designed to protect and prolong the life of printed images, Series 3270 extends the life of the graphics by 2 years. When used independently, Series 3270 is rated for outdoor durability up to 7 years. This product is not designed to be used as an optically clear window film.

Applications & Features
Protective overlaminate for SLXTM Cast Wrap, DPF 6100XLP, DPF 6000XRP and DPF 6000RP White, for vehicle and fleet applications.
Recommended dry time for printed images is 24-48 hours prior to laminating.
UV inhibitors to protect and extend the life of your printed graphic.
Arlon overlaminate film is designed to be laminated cold without any heat.
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 80 to 90 Gloss Units (Gloss)
20 to 30 Gloss Units (Satin)
1.5 to 10 Gloss Units (Matte)
Thickness Micrometer, Federal Bench Type 2-mil (50 micron)
Tensile Strength Tensile Tester with 2-in (51 mm) jaw separation; crosshead speed of 12 in/min, (5.1 mm/s), web direction ? 4.5 lb/in width ? 0.8 kg/cm width ? 4.5 lb/in width ? 0.8 kg/cm width
Elongation Instron Tensile Tester as above ? 150%
Shelf Life (In Box) Ideal storage temperature 21°C and 50% relative humidity 2 years from factory shipment
Application Temperature Range On clean image 40°F to 100°F 4.4°C to 38°C
Service Temperature Range On clean, dry substrate -40°F to 175°F -40°C to 79°C
Dimensional Stability Shrinkage After 158°F (70°C), 48 hours 5-mil 0.12 mm
Peel Adhesion PSTC-1, 15 min, 70°F (21°C) 4.35 lb/in 0.78 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760 cm/min) 70 g/2in 13.78 g/cm
Optimum Performance
Actual weathering durability depends on surface preparation, surface maintenance and exposure conditions. Successful weather resistance is characterized by the retention of legibility.

Series 3270 will resist weathering best when applied to vertical or upper outboard angles. Horizontal surfaces, such as hood(s) and auto roof(s), will deteriorate more quickly than vertical surfaces. This is due to increased exposure to sun and moisture, as well as continued high deposition of dirt and atmospheric contaminants. Arlon does not recommend its film for horizontal or 0 – 30 degree applications.