Description
Arlon Series 3420G, 3420S, and 3420M
Arlon Series 3420G, 3420S, and 3420M
3 Mil Calendered Gloss, Satin, or Matte Cold Overlaminate.
• Up to 5 year outdoor durability.
• Designed to protect flat surface signage and displays.
• Crystal clear adhesive enhances clarity on printed graphics.
• Use with Arlon DPF4560GTX, DPF4560MTX, DPF4500GX, DPF50WD, and DPF8000.
http://www.arlon.com/Objects/Documents/PIBS/Series%203420S-3420G%20-%20PIB_LR.pdf
Series 3420 Overlaminates
Premium Calendered Overlaminate Pressure Sensitive Film
Series 3420S: Satin Finish – Series 3420G: Gloss Finish
Series 3420 is constructed of 3-mil calendered vinyl film with clear, permanent pressure-sensitive adhesive. Designed to protect
and prolong the life of printed images, Series 3420 is made of polymeric blend face stock and available in satin and gloss
finishes. Series 3420 is rated for outdoor durability up to 5 years.
APPLICATIONS & FEATURES
• Protective overlaminate for all promotional, intermediate and industrial, calendered products.
• Shorter term signage, kiosks and POP displays.
PERFORMANCE & PHYSICAL DATA
*Standard Terms & Conditions Apply Effective Date 09/11
PROPERTY TEST METHODS TYPICAL VALUE
SURFACE FINISH Gloss Meter 60° Reflection 40-60% (satin finish); 80-90% (gloss finish)
THICKNESS
(INCLUDING ADHESIVE)
Micrometer, Federal
Bench Type
0.0042 in 0.11 mm
TENSILE STRENGTH Tensile Tester with 2-in (51 mm) jaw separation; crosshead
speed of 12 in/min. (5.1 mm/s), web direction
10 lb/in width 1.8 kg/cm width
ELONGATION Instron Tensile Tester as above ≥ 130%
SHELF LIFE Free from excessive moisture, temperature, direct sunlight 1 year from factory shipment
APPLICATION TEMPERATURE
RANGE
On clean, dry substrate 40°F to 100°F optimum 4.4°C to 38°C optimum
SERVICE
TEMPERATURE RANGE
On clean, dry substrate -20°F to 150°F -29°C to 65°C
HUMIDITY RESISTANCE Film applied to etched aluminum panels 24 hours prior to
testing. 100% relative humidity, 100ºF (38ºC) for 500 hours
No appreciable effect
GASOLINE RESISTANCE Film applied to etched aluminum panels 24 hours prior to
testing. Immersed 30 minutes at 70ºF (21ºC), stabilized 24
hours before inspection
No appreciable effect
DIMENSIONAL STABILITY 158°F (70°C), 48 hours 20 mils 0.51 mm
PEEL ADHESION PSTC-1, 15 min, RT 70°F (21°C) 2.5 lbs/in 0.45 kg/cm
LINER RELEASE TLMI Release at 90º,
300 in/min (760 cm/min)
120 g/2 in width 47 g/cm widthwww.arlon.com
USA: 2811 S. Harbor Blvd. – Santa Ana, CA 92704 – Tel: 800-854-0361- Fax: 714-540-7190 – Technical Services: 877-275-6698
EUROPE: Badhuisweg 11 2587 CA Den Haag The Netherlands – Tel: +31 (0) 70 354-4311 – Fax: +31 (0) 70 355-7721
INDIA: 4F1 Court Chambers, 35 – New Marines Lines – Mumbai 400 020 – Tel: +91 99 6755-3895
Actual weathering durability depends on surface preparation, surface maintenance and exposure
conditions. Successful weather resistance is characterized by the
retention of legibility.
Series 3420 will resist weathering best when applied to vertical or upper outboard angles.
Horizontal angles, such as hood and auto roof surfaces, will deteriorate more quickly than vertical.
This is due to increased exposure to sun and moisture, as well as continued high deposition of
dirt and atmospheric contaminants. Arlon does not recommend its film for horizontal or close
horizontal applications.
The following is made in lieu of all warranties expressed or implied:
All statements, technical information and recommendations published by Arlon relating to Arlon
products are based on tests believed to be reliable and within the accuracy of the equipment used
to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes
no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace
any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury,
loss or damage, direct or consequential, arising out of use or the inability to use the product.
Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing
or printing on the product. Before using, user shall determine the suitability of the product for
its intended use. User assumes all risk and liability of every nature in connection therewith. No
statements or recommendations other than those contained in the technical information published
by Arlon shall have force or effect unless contained in an agreement manually signed by the
officers of seller and manufacturer.
Reviews
There are no reviews yet.