Description
Arlon SLX®+gloss wrap kit premium 3270
SLX®+ is a 2-mil (50 micron) premium gloss white cast film with FLITE Technology®. Designed for full and partial
vehicle wraps and fleet applications, SLX+ features an optimal initial tack to ensure high repositionability with quick
anchoring and builds a strong bond while removing clean at the end of the wrap life. The optimized performance of
SLX+ improves all-weather application performance and cutting & weeding, while maintaining a high conformability in
complex areas such as rivets, curves, and deep channels. SLX+ has a tinted, permanent pressure-sensitive adhesive that
provides excellent opacity and a low profile air egress liner that aids in easy installation and provides a smooth finish.
SLX+ is rated for outdoor durability up to 10 years (unprinted). Printed durability is dependent on the ink system used.
APPLICATIONS & FEATURES
• Optimized product construction designed for vehicle and applications, including stainless steel
• FLITE Technology® allows superior repositionability & snap-up, with strong anchoring to ease large panel installation
• Excellent conformability for installing complex curves, deep channels, and rivets
• Designed for cutting and weeding letters 2” (5 cm) or greater
• Vibrant and reliable print quality on Eco-Solvent, Solvent, UV and Latex print systems
• Compatible with Series 3210, Series 3270, Series 3220, Series 3310 and Series 3200 Overlaminates
SURFACE FINISH Gloss Meter 60° Reflection 70 to 90 Gloss Units
THICKNESS Micrometer, Federal Bench Type 2-mil (50 micron)
TENSILE STRENGTH Tensile Tester with 2-in (51 mm) jaw separation; crosshead speed of 12 in/min.
(5.1 mm/s), web direction ≥ 4.5 lb/in ≥ 0.8 kg/cm
ELONGATION Instron Tensile Tester as above Average 190%
SHELF LIFE (IN BOX) Ideal Storage Temperature 70°F (21°C) and 50% relative humidity 2 years from factory shipment
APPLICATION
TEMPERATURE RANGE On clean, dry substrate 50°F to 90°F 10°C to 33°C
SERVICE
TEMPERATURE RANGE On clean, dry substrate -40°F to 176°F -40°C to 80°C
DIMENSIONAL STABILITY 158°F (70°C), 48 hours 0.010 in 0.24 mm
PEEL ADHESION
PSTC-1, 15 min, 70°F (21°C) 2.8 lb/in 490 N/m
PSTC-1, 24 hours, 70°F (21°C) 3.6 lb/in 630 N/m
PSTC-1, 1 week, 70°F (21°C) 4.2 lb/in 736 N/m
LINER RELEASE TLMI Release at 90˚, 300 in/min (760 cm/min) 50 g/2 in 9.84 g/cm