Avery Dennison® Paint Protection Film SPF XI 60″ X 49′

Description

Avery Dennison® Paint Protection Film SPF XI 60″ X 49′

PRODUCT DATA SHEET
Avery Dennison® Paint Protection Film SPF XI
Issued: 03/2023
Introduction
AD Supreme Protection Film SPF-XI is a premium
engineered thermoplastic polyurethane film in
transparent clear gloss finish, designed to protect a
vehicle’s finish against stone chips, road debris, insect
stains, small to medium scratches, chemical stains and
weathering, without degrading the original paint. SPF-XI
has a “self-healing” top coat, which helps small
scratches in the film disappear at room temperature,
maintaining the pristine look of the vehicle.
Conversion
SPF-XI is designed for vehicle paint and painted
surface protection purposes and is easy to size by
manual cutting during application or digital cutting
plotters. It is also possible to apply SPF-XI on top of
pre-existing and applied Avery Dennison Supreme
Wrapping FilmTM. Material should be applied using the
wet application method. For more information please
refer to TB. 6.0.
Note: Always remove the protective PET top sheet immediately after cutting material from the roll or before
converting using a plotter or flatbed cutter. Always store unused material on the roll and tightly wound and secure.
Recommendations
≫ Protection of the highly sensitive external surfaces of the vehicle, such as bumper, side mirrors, hood & wheel
arches.
≫ Protection of painted internal metal surfaces, such as luggage racks or chairs in busses or trains.
≫ Protection of painted metal surfaces in high traffic areas such as reception desks, door impact areas, wall
panels and more.
Features
≫ Top- coating – increases the resistance to external damages
≫ “Self-healing” – helps small scratches in the film disappear at room temperature, without the need of any heat
source.
≫ Up to 10 years protection- maintaining the quality of vehicle finish
≫ Exceptional visual properties – enhancing the look of the vehicle with optical clarity & high gloss finish
≫ Premium grade, conformable thermoplastic polyurethane (TPU) film.
EU
graphics.averydennison.eu
Face Film
165 micron, gloss clear top-coated
thermoplastic polyurethane protected with PET
sheet
Adhesive
Permanent, UV resistant, solvent acrylic base
Backing
PET liner
Durability
Zone 1 vertical 10 years
Shelf Life
2 years Stored at 22°C 50-55 % RH
Physical Characteristics
Important
Information on physical and chemical characteristics and values in this document are based upon tests we believe
to be reliable and do not constitute a warranty. They are intended only as a source of information and are given
without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the
suitability of this material to their specific use.
All technical data are subject to change. In case of any ambiguities or differences between the English and foreign
versions of this document, the English version shall be prevailing and leading.
Test method1 Results
Product
Caliper, facefilm (micron) ISO 534 165
Caliper, facefilm + adhesive (micron) ISO 534 200
Caliper, liner (micron( ISO 534 80
Gloss (GU) ISO 2813, 20o >90 GU
Dimensional stability (mm max.) FINAT FTM 14 0.15
Shelf life (years) Stored at 22° C/50-55 % RH 2
Adhesive
Tensile strength@ Break (MPa) ISO 527 >20
Elongation@ Break (%) ISO 527 >200
Adhesion, initial 180o 20 min (N/m) FINAT FTM-1, stainless steel >350
Adhesion, ultimate 180o 72 hours
(N/m)
FINAT FTM-1, stainless steel >600
Temperature range
Application temperature (Minimum:
°C)
10
Service temperature (°C to +°C) -40 to +100
Chemical properties2 Visual Inspection after exposure to
following test fluids
Gasoline resistance 30 min No Significant Change
Diesel resistance 24 hours No Significant Change
Water & Soap 24 hours No Significant Change
Mild Acids 4 hours No Significant Change
Cleaning Fluid 24 hours No Significant Change
Motor Oil 24 hours No Significant Change
Durability3
Zone 1 Zone 2 Zone 3
Vertical 10 Years 8 Years 6 Years
Horizontal 7 Years 4 Years 3 Years
Heat Aging 500 hrs @90 °C dE<2
Water Inmersion 400 hrs @40 °C No Significant Change
EU
graphics.averydennison.eu
1) Test methods: More information about our test methods can be found on our website.
2) Prolonged inmersion in gasoline and similar fluids is not recommended
3) Durability: The durability is based on middle European exposure conditions. Actual performance life will depend on substrate preparation,
exposure conditions and maintenance of the marking. For instance, in the case of signs facing south; in areas of long high temperature exposure
such as southern European countries; in industrially polluted areas or high altitudes, exterior performance will be decreased..
Avery Dennison warrants that its Products meet its specifications. Avery Dennison gives no other express or implied guarantees or warranties with respect to the Products, including,
but not limited to, any implied warranties of merchantability, fitness for any particular use and/or non infringement. All Avery Dennison products are sold with the understanding that the
purchaser has independently determined the suitability of such products for its purposes. The period of warranty is one (1) year from the date of shipment unless expressly provided
otherwise in the product data sheet. All Avery Dennison’s products are sold subject to Avery Dennison’s general terms and conditions of sale, see
http://terms.europe.averydennison.com.
Avery Dennison’s aggregate liability to Purchaser, whether for negligence, breach of contract, misrepresentation or otherwise, shall in no circumstances exceed the price of the
defective, non-conforming, damaged or undelivered Products which give rise to such liability as determined by net price invoices to Purchaser in respect of any occurrence or series of
occurrences. In no circumstances shall Avery Dennison be liable to Purchaser for any indirect, incidental or consequential loss, damage or injury, including without limitation, loss of
anticipated profits, goodwill, reputation, or losses or expenses resulting from third party claims.
Ⓒ 2023 Avery Dennison Corporation. All rights reserved. Avery Dennison and all other Avery Dennison brands, this publication, its content, product names and codes are owned by
Avery Dennison Corporation. All other brands and product names are trademarks of their respective owners. This publication must not be used, copied or reproduced in whole or in part
for any purposes other than marketing by Avery Dennison.
EU
graphics.averydennison.eu

A135393 SPF-XI PERM PET Paint Protection Film 60″x 49ft