Description
Avery DOL 1360 3D Gloss
Avery DOL 1380 Matte
1.3 Mil Cast Cold Overlaminate.
• 4 year durability.
• Ideal for use on vehicle wraps, designed to conform to rivets, corrugations, and compound curves.
Features
Ultra conformable film with excellent deep recess (channel) and concave
performance in combination with our Ultimate Cast films
Provides maximum UV and weathering protection with added abrasion and
chemical resistance for printed graphics
Improves solvent and UV curable inkjet outdoor image durability up to 4 years
Exceptional adhesion to solvent inkjet, UV curable inkjet and screen printed
graphics
Provides extra “body” to finished graphics for improved application
performance without the need for application tape
Excellent adhesive contact to UV curable inks with no “silvering”
Brilliant transparency for bright, vivid images
Outstanding smooth, low-glare finish for popular matte paint look
Description
Film: 30 micron matte finish
clear conformable UV stable
cast vinyl overlaminate
Adhesive: Permanent acrylic
(clear)
Backing: One side coated
Kraft paper, 130g/m2
Outdoor life: Up to 4 years
Conversion
Flat bed cutters Cold overlaminating
Friction fed cutters Estat printing
Die cutting Water based inkjet
Thermal transfer Solvent inkjet
Screen printing UV Cured inkjet
Common Applications
Flat sided trucks
Corrugated trucks
Cars and vans
Marine
Application
• For processing tips and reference guides please refer to Avery Dennison Instructional Bulletins:
• 4.06 Processing Tips for Avery Dennison DOL Films
Uses
Avery Dennison DOL1380 is a conformable premium quality UV stable matte
finish cast overlaminate designed for use as a protective overlaminating film
for digitally printed images and is suitable for durable outdoor images on
irregular surfaces, such as vehicles, where conformability is necessary.
Avery Dennison Graphics Solutions Asia Pacific
www.graphicsap.averydennison.com
General
Calliper, face film ISO 534 30 micron
Calliper, face film & adhesive ISO 534 55 micron
Dimensional stability DIN 38464 0.4mm Max
Tensile Strength DIN 53455 0.7-1.5 kg/cm
Elongation DIN 53455 > 100%
Gloss ISO 2813, 60o
90%
Adhesion, initial ASTM 1000, stainless steel 525 N/m
Adhesion, ultimate ASTM 1000, stainless steel 613 N/m
Flammability Self extinguishing
Shelf life Stored at 22° C/50-55 % RH 2 years
Durability ** Vertical exposure Up to 4 years
Thermal
Min. Application Temperature + 4 oC
Lamination temperature See relevant technical bulletins
Service temperature range – 40oC to + 80oC
Chemical
Resistant to most petroleum based oils, greases, and aliphatic solvents
Resistant to mild acids, alkalis and salts
Important
Information on physical characteristics is
based upon tests we believe to be reliable.
The values listed herein are typical values
and are not for use in specifications.
They are intended only as a source of
information and are given without
guarantee and do not constitute a
warranty. Purchasers should independently
determine, prior to use, the suitability of
any material for their specific use.
All technical data is subject to change
without prior notice.
Warranty
Avery Dennison®
materials are
manufactured under careful quality control
and are warranted to be free from defect in
material and workmanship. Any material
shown to our satisfaction to be defective at
the time of sale will be replaced without
charge. Our aggregate liability to the
purchaser shall in no circumstances
exceed the cost of the defective materials
supplied. No salesman, representative or
agent is authorised to give guarantee,
warranty, or make any representation
contrary to the foregoing.
All Avery Dennison®
materials are sold
subject to the above conditions, being part
of our
standard conditions of sale, a copy of
which is available on request.
**Durability
Durability is based on exposure conditions
in the normal middle European and central
North American regions. Actual
performance life will depend on substrate
preparation, exposure conditions and
maintenance of the marking. For instance,
in the case of signs facing north in the
southern hemisphere or south in the
northern hemisphere; in areas of long high
temperature exposure such as northern
Australia; in industrially polluted areas or
high altitudes, exterior performance will be
decreased. Please refer to Avery Dennison
Instructional Bulletin 1.3 for definitions and
reductions based on the ‘Zone System’.
***Information unavailable at time of
printing.
Dimensional stability:
Is measured on a 150 x 150 mm aluminium panel to which
a specimen has been applied; 72 hours after application
the panel is exposed for 48 hours to + 70°C, after which
the shrinkage is measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a
180° angle from a stainless steel or float glass panel, 24
hours after the specimen has been applied under
standardised conditions. Initial adhesion is measured 20
minutes after application of the specimen.
Flammability:
A specimen applied to aluminium is subjected to the flame
of a gas burner for 15 seconds. The film should stop
burning within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high
and low temperatures and brought back to room
temperature. 1 hour after exposure the specimen is
examined for any deterioration. Note: Prolonged
exposure to high and low temperatures in the presence of
chemicals such as solvents, acids, dyes, etc. may
eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which
a specimen has been applied. 72 hours after application
the panels are immersed in the test fluid for the given test
period. 1 hour after removing the panel from the fluid, the
specimen is examined for any deterioration.
Corrosion Resistance:
A specimen applied to aluminium is exposed to saline mist
(5% salt) at 35ºC. After exposure, the film is removed and
the panel is examined for traces of corrosion
Reviews
There are no reviews yet.