Avery DOL6040 SPARKLE 3 mil Clear Gloss Sparkle Effect Cast Vinyl with a Polyester liner

Description

Avery DOL6040 SPARKLE 3 mil Clear Gloss Sparkle Effect Cast Vinyl with a Polyester liner
Avery Dennison DOL 6040 Clear Sparkle is a premium quality, flexible film designed for use as a protective overlaminate film for screen and digitally printed decals. DOL 6040 Clear Sparkle provides a metallic look to standard printed decals. The gloss film features a synthetic liner that creates a super smooth high gloss finish.

BCI Imaging Supplies
Avery Dennison®
DOL 6040
Clear Sparkle Laminate
Transparent Synthetic
Revision: 0 Dated: 09/10/15
Product Data Sheet
Page 1 of 3
graphics.averydennison.com
Customer Service: 800-282-8379
Uses:
Avery Dennison DOL 6040 Clear Sparkle is a
premium quality, flexible film designed for use
as a protective overlaminate film for screen and
digitally printed decals. DOL 6040 Clear
Sparkle provides a metallic look to standard
printed decals. The gloss film features a
synthetic liner that creates a super smooth high
gloss finish.
Face: 3 mil (76 microns) cast film
Adhesive: Permanent Acrylic
(clear)
Liner: 3 mil Transparent
Synthetic
Durability: Up to 2 years
Application
Surfaces:
Flat, Simple Curves, and
Complex Curves
*NOTE: Films constructions with thickness 4 mil (102 micron) and above
may have reduced conformability.
Features:
• High gloss finish
• Sparkle in laminate provides metallic finish on printed graphic
• Protects image from scratches
• Enhances color and depth of image
• Good durability and outdoor performance
• Dimensionally stable
• Aids in application of printed graphic
• Excellent UV, temperature, humidity, and salt-spray resistance
Conversion:
• Cold Overlaminating • Plotter Cut
Common Applications:
• Vehicle
• Marine/ Watercraft
• Wall Murals
• POP/ Tradeshow
• Window Graphics
• Outdoor Signage

Avery Dennison®
DOL 6040
Clear Sparkle Laminate
Transparent Synthetic
Revision: 0 Dated: 09/10/15
Product Data Sheet
Page 2 of 3
graphics.averydennison.com
Customer Service: 800-282-8379
Physical Characteristics:
Property Value
Caliper, face 3 mil (76 µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
<0.015”(0.4mm)
Tensile at Yield 4.0 – 8.0 lb/in (0.7–1.5
kg/cm)
Elongation 200% min.
Hunter Gloss Measured @
60°
90 GU
Adhesion: 15 min. 3.0 lbs/in (525 N/m)
24 hr. 4.0 lbs/in (700 N/m)
Flammability
Shelf-Life 2 years from date on label
(up to 2 years unprocessed, OR
process within one year and
apply within 1 year of processing)
Durability
Zone 1
Vertical
Exposure
Up to 2 years
Min. Application
Temperature
40° F (4° C)
Service
Temperature
-40° to 180°F (-40° to 82°
C) (Reasonable range of
temperatures which would be
expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions including water.
Resists Petroleum Vapors
Data represents average values where applicable, and is not
intended for specification purposes.
Warranty:
This Warranty applies to the Product listed in this Data
Sheet. All statements, technical information (including
physical and chemical characteristics) and
recommendations about Avery Dennison products are
based upon tests believed to be reliable but do not
constitute a guarantee or warranty. All Avery Dennison
products are sold subject to the Purchaser’s assent and
agreement that Purchaser is responsible for, and has
independently determined, the suitability of such products
for its purposes or its customer’s purposes. Avery
Dennison products are warranted to be free from defects in
material and workmanship (i) for two years from the date of
manufacture, or (ii) from the date of manufacture until the
expiration of the period stated on the specific Product Data
Sheet in effect at the time of delivery.. Such time periods
are subject in either case to the proper storing and
application of said product, and the failure to properly store
or apply the product, including without limitation the failure
to follow any applicable Instructional Bulletin, negates any
warranty. It is expressly agreed and understood that Avery
Dennison’s sole obligation and Purchaser’s exclusive
remedy under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
exclusively to: (a) repair or replacement of defective
product without charge at Avery Dennison’s plant or at the
location of the product (at Avery Dennison’s election), or
(b) in the event repair or replacement are not commercially
practical, a credit amount up to the price of the product
taking into account the defect in the product in Avery
Dennison’s sole discretion.
THE WARRANTY EXPRESSLY SET FORTH ABOVE IS
IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR USE AND/OR NONINFRINGEMENT.
SELLER SPECIFICALLY DISCLAIMS
AND EXCLUDES ALL OTHER SUCH WARRANTIES. NO
WAIVER, ALTERATION, ADDITION OR MODIFICATION
OF THE FOREGOING CONDITIONS SHALL BE VALID
UNLESS MADE IN WRITING AND MANUALLY SIGNED
BY AN OFFICER OF AVERY DENNISON.
AVERY DENNISON’S LIABILITY FOR DEFECTIVE
PRODUCTS SHALL NOT EXCEED THE PURCHASE
PRICE PAID THEREFORE BY PURCHASER AND IN NO
EVENT SHALL AVERY DENNISON BE RESPONSIBLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES WHETHER FORESEEABLE OR NOT,
CAUSED BY DEFECTS IN SUCH PRODUCT, WHETHER
SUCH DAMAGE OCCURS OR IS DISCOVERED
BEFORE OR AFTER REPLACEMENT OR CREDIT, AND
WHETHER OR NOT SUCH DAMAGE IS CAUSED BY
AVERY DENNISON’S NEGLIGENCE.
All sales and contracts for sale of Products are subject to
Purchaser’s assent and agreement to this Warranty.
Avery Dennison hereby objects to any terms or conditions
contained in any purchase order or other communication of
any kind from the Purchaser that is conflicting, inconsistent
or additional to this Agreement.
Avery Dennison®
DOL 6040
Clear Sparkle Laminate
Transparent Synthetic
Revision: 0 Dated: 09/10/15
Product Data Sheet
Page 3 of 3
graphics.averydennison.com
Customer Service: 800-282-8379
Special Considerations:
When overlaminating UV printed graphics: Heat assist and increasing lamination pressure when applying the
overlaminate will reduce the silvering that can occur when laminating UV printed graphics. Do not exceed 115° F (46° C)
on the top or bottom roll. Roll pressure up to 100 psi may be used. When applying the overlaminate in this manner, use
the minimum amount of unwind tension on the overlaminate to reduce stretching during application.
Related Documents:
The following Avery Dennison®
literature will provide complete information to the user for proper application, storage, and
other requirements and is available upon request from your Avery Dennison representative or from the Avery Dennison
website (www.graphics.averydennison.com).
Document Title Reference Number
Substrate Cleaning and Preparation Instructional Bulletin #1.10
Storage, Maintenance, and Cleaning of PVC Films Instructional Bulletin #1.20
Warranty of Films Instructional Bulletin #1.30
Cleaning and Maintenance of Vehicle Wraps Instructional Bulletin #1.50
Tips for Overlaminating, Premasking & Packaging Graphics Instructional Bulletin #5.50
Removal Instructions Instructional Bulletin #4.10
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corporation
Avery DOL6040 SPARKLE 3 mil Clear Gloss Sparkle Effect Cast Vinyl with a Polyester liner 6319 6320

Custom Finish – FTO A114978 DOL6040 SPARKLE PERM PET 54″
Custom Finish – CTO A114676 DOL6040 SPARKLE PERM PET 60″
Stock A005753 DOL6040 SPARKLE PERM PET 54X50 YDS 3IN
Stock A005754 DOL6040 SPARKLE PERM PET 60X50 YDS 3IN
Sample A010517 DOL6040 SPARKLE PERM PET 54X5