Avery FT 8306 Double Sided Polyester Tape

Description

Avery FT 8306 Double Sided Polyester Tape
Designed for use where temporary mounting to substrates is desired. Bonding to substrates with low internal strength such as paper and wallboard is not recommended. Specially designed dual adhesive system Removable adhesive on one side, and a permanent adhesive on the other Strong clear polyester carrier Excellent die-cutting and slitting characteristics Permanent adhesive is excellent for foam bonding Removable adhesive bonds to a wide variety of substrates and removes cleanly on demand

BCI Imaging Supplies

FEATURES: BENEFITS:
CONSTRUCTION:
Liner:
Densified Kraft
Adhesive 1 Liner:
Removable Acrylic
Carrier:
Polyester
Adhesive 2 Uwind:
Permanent Rubber
FT 8306
Designed for use where temporary mounting to substrates is desired. Bonding to substrates with low internal strength
such as paper and wallboard is not recommended.
Specially designed dual adhesive system Removable adhesive on one side, and a permanent
adhesive on the other
Strong clear polyester carrier Excellent die-cutting and slitting characteristics
Permanent adhesive is excellent for foam bonding
Removable adhesive bonds to a wide variety of
substrates and removes cleanly on demand.
Densified kraft release liner
Adhesive Properties:
Thickness Test Method(s): PSTC-133
Liner:
Carrier & Adhesives:
Total Caliper:
PEEL ADHESION Test Method(s): PSTC-101, ASTM D-3330, STD-10
2 mil PET Initial 180º 12″ min
Substrate
SS Liner
Unwind
LOOP TACK Test Method(s): PSTC-16, STD-7
2 mil PET 180º 20″ min
Substrate
SS Liner
Unwind
STATIC SHEAR Test Method(s): PSTC-107, ASTM D 3654, STD-9
2 mil PET 1″ sq (6.5 cm2) 1000 g
Substrate
SS Liner
Unwind
TEMPERATURES
Min Application Temp
Max Continuous Operating Temp
Max Intermittent Operating Temp
APPLICATION TECHNIQUES
• It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry, and free of grease or oil
• Bond strength is dependent upon the amount of adhesive-to-surface contact developed
• Note that different pressure, time and temperature on different (film / rigid) surface achieves different performance
STORAGE / SHELF LIFE
• One year when stored at 64-72ºF (18-22ºC) / 30-70% relative humidity, out of direct sunlight and in original packaging.
Phone: +86 512 57155001
Fax: +86 512 57155059
Microns (µm)
91
86
MM’s
0.09
0.09
US Mils
3.6
3.4
7.0
> 250
5.0 80 876
FT 8306
Typical Values
Lbf / In US Oz / In N / Meter
1.3 21 228
0.18 178
8.1 130 1418
Lbf / in US Oz / In N / Meter
1.3 21 228
Min to Fail
º C
> 150
44077 USA
º F
South America North America
© 2015 Avery Dennison Corporation. All rights reserved. Avery Dennison® is a registered trademark of Avery Dennison Corporation. All other Avery Dennison
brands, product names, antenna designs and codes or service programs are trademarks of Avery Dennison Corporation.
B-2300 Turnhout
10 º C
65 º C
Rua Francisco Foga, 225 250 Chester Street
50 º F
125 º F
150 º F
THE LISTED VALUES ARE TYPICAL AND NOT INTENDED TO SERVE AS PRODUCT SPECIFICATIONS
SP Brazil
51 º C
Europe
Please refer to Tapes.AveryDennison.com for complete terms and conditions, including warranty terms, relating to this product. You should periodically review
the site as terms and conditions are subject to change without notice.

Avery FT 8306 Double Sided Polyester Tape 8718400160180 FT 8306 0.5″ x 60 yd RL 7.5 18.04 2.405
8718401000180 FT 8306 1″ x 60 yd RL 15 27.06 1.804