Avery High Performance Cast Fluorescent

Description

Avery High Performance Cast Fluorescent

Avery High Performance Cast Fluorescent
• 2.2 mil cast vinyl.
• Excellent cutting and weeding.
• Designed for short-term exterior use promotional signage, up to 6 months.
• Pigmented adhesive-not reversible.

http://averygraphics-resources.com/PDFs/PD_Sheets/PDS_SF_100_Series_Fluorescent_Perm_Kraft.pdf

Uses:
Avery Graphics™ Fluorescent cast vinyl
films are designed for short-term exterior
safety, promotional and high visibility
applications. This construction provides an
attractive appearance and easy cutting,
weeding and transferring characteristics for
promotional signage applications.
.

Face: 2.2 mil (56 microns) high
gloss cast film

Adhesive: Permanent White
Acrylic

Liner: 78# Bleached Kraft

Durability: 3-6 months
Application
Surfaces:
Flat, Simple Curves

Features:
• Short Term durability and outdoor performance
• Dimensionally stable liner for easy converting
• High gloss finish
• Excellent conversion on CAD plotters
• Easy cutting & weeding
• Good dimensional stability
• Good UV, temperature, humidity, and salt-spray resistance

Conversion:
Thermal Die-Cutting
Flat Bed Sign-Cut
Drum Roller Sign-Cut
Steel Rule Die-Cutting
Thermal Transfer
Screen Printing
Cold Overlaminating
Water based inkjet
Solvent based inkjet
Mild/Eco Solvent inkjet
UV inkjet

Common Applications:
Trailers
Banners
Architectural Signage
Directional Signage
Indoor Signage
Outdoor advertising
ShortTerm ApplicationsAvery®
SF 100 Fluorescent Series
Permanent Kraft
(formerly: A0 Fluorescent Series – 78# )
Revision: New Dated: 1/6/2009

Product Data Sheet
Page 2 of 3
Graphics & Reflective Products Division AnswerLine: 800-231-4654
250 Chester Street www.averygraphics.com
Painesville, OH 44077

Physical Characteristics:
Property Value
Caliper, face 2.2 mil (56 µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
<0.015”(0.4 mm)
Tensile at Yield 4.0 -8.0 lb/in (0.7 – 1.5
kg/cm)
Elongation 50% min.
Gloss 90% ± 10

Adhesion: 24 hr 3.5 lbs/in (770 N/m)

1 week 4.0 lbs/in (600 N/m)
Flammability Self Extinguishing

Shelf-Life 1 year
Durability Vertical
Exposure
3-6 months

Min. Application
Temperature
50° F (10° C)
Service
Temperature
-50° – 180°F (-40° – 82° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.

Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)

Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either one year (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.

Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.

NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON