Cart

Avery MPI2103 GLOSS GRAY PERM SF 3.1 mil White Gloss opaque vinyl with a permanent adhesive

$275.00$525.00

SKU: Avery MPI2103 GLOSS GRAY PERM SF 3.1 mil White Gloss opaque vinyl with a permanent adhesive Categories:

Description

Avery MPI2103 GLOSS GRAY PERM SF 3.1 mil White Gloss opaque vinyl with a permanent adhesive
Avery Dennison® HP MPI 2102 and 2103 Gloss films are flexible calendered vinyl films. HP MPI2102 and 2103 Gloss offer exceptional value for applications requiring premium calendered film durability combined with a permanent or removable adhesive performance.

BCI Imaging Supplies
Avery Dennison® HP MPI 2102 / 2103
Gloss
Permanent / Removable StaFlat™
Revision: 4 Dated: 11/26/13
Product Data Sheet
Page 1 of 3
averygraphics.com
AnswerLine: 800-231-4654
Uses:
Avery Dennison® HP MPI 2102 and 2103
Gloss films are flexible calendered vinyl
films. HP MPI2102 and 2103 Gloss offer
exceptional value for applications requiring
premium calendered film durability
combined with a permanent or removable
adhesive performance.
Face: 3.1 mil (80 microns) high
gloss calendered
Adhesive: Acrylic
MPI 2103 – Perm (gray)
MPI 2102 – Rem (gray)
Liner: 90# StaFlat™
Durability: Up to 6years
(unprinted)
Application
Surfaces:
Flat, simple curves (restricted to
non-spill areas)
Features:
• 100% opacity completely covers whatever is underneath
• High Gloss finish
• Outstanding durability and outdoor performance
• Great image clarity and color pop
• Dimensionally stable liner for easy converting
• MPI 2102 Removable up to two (2) years
• ICC profiles available on Avery Dennison’s website (www.iccprofiles.averygraphics.com)
Conversion:
• Thermal Die-Cutting
• Flat Bed Sign-Cut
• Drum Roller Sign-Cut
• Steel Rule Die-Cutting
• Solvent based inkjet
• Mild/Eco Solvent inkjet
• UV inkjet
• Latex Inkjet
Common Applications:
• Fleet
• Vehicle
• Wall Murals
• POP/ Tradeshow
• Outdoor Signage
• Floor Graphics

Avery Dennison® HP MPI 2102 / 2103
Gloss
Permanent / Removable StaFlat™
Revision: 4 Dated: 11/26/13
Product Data Sheet
Page 2 of 3
averygraphics.com
AnswerLine: 800-231-4654
Physical Characteristics:
Property Value
Caliper, face 3.1 mil (80µm)
Caliper, adhesive 1.5mil (40 µm)
Dimensional
stability
<0.065”(1.651 mm)
Note: Ink loads in excess of 250%
may cause increased shrinkage of
the printed film.
Tensile at Yield
Elongation
Gloss Hunter Gloss
@ 60
<16
Adhesion: 15 min. Adhesive
Removable
Permanent
1.3 lbs/in (240 N/m)
2.8 lbs/in (300 N/m)
Adhesion 24 hrs Removable
Permanent
1.7 lbs/in (438 N/m)
3.4 lbs/in (600 N/m)

Flammability Self Extinguishing
Shelf-Life 2 years from date on label
(up to 2 years
unprocessed, OR process
within one year and apply
within 1 year of processing)
Durability Vertical
Exposure
Unprinted –6 years
Min. Application
Temperature
50° F (10° C)
Service
Temperature
-50° – 180°F (-40° – 82° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
Removable adhesive is not cleanly removable from nitrocellulose
Paints, ABS, polystyrene, or PVC.
Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)
Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either two years (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.
Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.
NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.

Avery Dennison® HP MPI 2102 / 2103
Gloss
Permanent / Removable StaFlat™
Revision: 4 Dated: 11/26/13
Product Data Sheet
Page 3 of 3
averygraphics.com
AnswerLine: 800-231-4654
Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm)aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
Avery MPI2103 GLOSS GRAY PERM SF 3.1 mil White Gloss opaque vinyl with a permanent adhesive 6096
41081 6095

Additional information

Product Type

Size

, ,

Thickness

Brands

Ink Type

, , ,

Color

Surface Finish

Media Type

perforation pattern
Weight

Reviews

There are no reviews yet.

Be the first to review “Avery MPI2103 GLOSS GRAY PERM SF 3.1 mil White Gloss opaque vinyl with a permanent adhesive”

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations