Description
Avery MPI2105 GLOSS EZ RS – Gray LTR 3.1 mil White Gloss opaque vinyl with a long term removable adhesive
Avery Dennison® HP MPI 2105 Easy
Apply and Easy Apply RS Calendered
Vinyl films is a flexible high gloss calendered
vinyl. HP MPI 2105 Easy Apply (RS)
offers exceptional value for applications
requiring premium calendered film durability
combined with a permanent or removable
adhesive performance. HP MPI 2105 Easy
Apply (RS) offers the benefits of reduced
wrinkling and air entrapment inherent in the
application of decals.
Avery Dennison® HP MPI 2105 Easy
Apply and Easy Apply RS
Long Term Removable StaFlat
Revision: 4 Dated: 11/26/13
Product Data Sheet
Page 1 of 3
averygraphics.com
AnswerLine: 800-231-4654
Uses:
Avery Dennison® HP MPI 2105 Easy
Apply and Easy Apply RS Calendered
Vinyl films is a flexible high gloss calendered
vinyl. HP MPI 2105 Easy Apply (RS)
offers exceptional value for applications
requiring premium calendered film durability
combined with a permanent or removable
adhesive performance. HP MPI 2105 Easy
Apply (RS) offers the benefits of reduced
wrinkling and air entrapment inherent in the
application of decals.
Face: 3.1 mil (80 microns)high
gloss calendered
Adhesive: Long Term
Removable Acrylic (gray)
Liner: 90# StaFlat
Durability: Up to
6years(unprinted)
Application
Surfaces:
Flat, simple curves (restricted to
non-spill areas)
Features:
Air egress technology helps eliminate wrinkles and bubbles
RS provides repositionability for repositioning of graphic without great force
High Gloss finish
Outstanding durability and outdoor performance
Dimensionally stable liner for easy converting
ICC profiles available on AveryDennisons website (www.iccprofiles.averygraphics.com)
Excellent clean removability
Conversion:
Thermal Die-Cutting
Flat Bed Sign-Cut
Drum Roller Sign-Cut
Steel Rule Die-Cutting
Solvent based inkjet
Mild/Eco Solvent inkjet
UV inkjet
Latex Inkjet
Common Applications:
Fleet
Vehicle
POP/ Tradeshow
Window Graphics
Outdoor Signage
Avery Dennison® HP MPI 2105 Easy
Apply and Easy Apply RS
Long Term Removable StaFlat
Revision: 4 Dated: 11/26/13
Product Data Sheet
Page 2 of 3
averygraphics.com
AnswerLine: 800-231-4654
Physical Characteristics:
Property Value
Caliper, face 3.1 mil (80µm)
Caliper, adhesive 1.8 mil (40 µm)
Dimensional
stability
<0.065(1.651 mm)
Note: Ink loads in excess of 250%
may cause increased shrinkage of
the printed film.
Tensile at Yield
Elongation Min 100%
Gloss @ 60 85%
Adhesion:. 15 min.
24 hr.
2.5lbs/in (450 N/m)
3.1 lbs/in (550 N/m)
Flammability Self Extinguishing
Shelf-Life 2 years from date on label
(up to 2 years
unprocessed, OR process
within one year and apply
within 1 year of processing)
Durability Vertical
Exposure
Unprinted 5 years
Min. Application
Temperature
50° F (10° C)
Service
Temperature
-50° – 176°F (-45° – 80° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)
Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either two years (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.
Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.
NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.
Avery Dennison® HP MPI 2105 Easy
Apply and Easy Apply RS
Long Term Removable StaFlat
Revision: 4 Dated: 11/26/13
Product Data Sheet
Page 3 of 3
averygraphics.com
AnswerLine: 800-231-4654
Dimensional stability:
Is measured on a 6 x 6 (150 x 150 mm)aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
Avery MPI2105 GLOSS EZ RS – Gray LTR 3.1 mil White Gloss opaque vinyl with a long term removable adhesive 41084 41121 319917154R 319917160R
Stock A002588 MPI2105 GLOSS LTR EZRS 60X50 YDS 3IN
CTO A177461 MPI2105 GLOSS LTR EZRS 60X100 YDS 3IN
Stock A002539 MPI2105 GLOSS LTR EZRS 54X50 YDS 3IN
FTO A177460 MPI2105 GLOSS LTR EZRS 54X100 YDS 3IN
Stock A177583 MPI2105 GLOSS LTR EZRS 54X250 YDS 3IN
Sample A010497 MPI2105 GLOSS LTR EZRS 54X5 3IN
Reviews
There are no reviews yet.