Avery MPI2121 TRANSIT VINYL REM SF 3.4 mil White Matte opaque flexible calendered vinyl film

Description

Avery MPI2121 TRANSIT VINYL REM SF 3.4 mil White Matte opaque flexible calendered vinyl film
Avery Dennison® HP MPI 2121 Transit Vinyl is a specially engineered, flexible calendered vinyl film that has been specifically designed for use in the temporary transit advertising market. HP MPI 2121 Transit Vinyl can be applied to bus advertising panels and directly to the bus surface.

BCI Imaging Supplies
AveryDennison®HP MPI 2121
Transit Vinyl
Removable StaFlat™
(formerly: MPI Transit Vinyl)
Revision: 9 Dated: 03/04/14
Product Data Sheet
Page 1 of 4
averygraphics.com
AnswerLine: 800-231-4654
Uses:
Avery Dennison® HP MPI 2121 Transit
Vinyl is a specially engineered, flexible
calendered vinyl film that has been
specifically designed for use in the
temporary transit advertising market. HP
MPI 2121 Transit Vinyl can be applied to
bus advertising panels and directly to the
bus surface.
Face: 3.4 mil (86 microns)matte
Adhesive: Removable Acrylic(clear)
Liner: 90# StaFlat™
Durability: Up to 1year (unprinted)
Application
Surfaces:
Flat, simple curves (restricted to nonspill
areas)
Features:
• 100% opacity, completely covers whatever is underneath
• Pre-approved CBS® Outdoor and Titan Media for King, Queen, and Tail bus posters
• Matte finish
• Great image clarity and color pop
• Dimensionally stable liner for easy converting
• ICC profiles available on Avery Dennison’s website (www.avery-us.color-base.com)
• ASTM E84 Class 1 or A rating
• Removable without heat
Conversion:
• Thermal Die-Cutting
• Flat Bed Sign-Cut
• Drum Roller Sign-Cut
• Steel Rule Die-Cutting
• Screen Printing
• Solvent based inkjet
• Mild/Eco Solvent inkjet
• UV inkjet
• Latex Inkjet
Common Applications:
• Bus / Transit Ad
• Fleet
• Vehicle
• Wall Murals
• POP/ Tradeshow
• Window Graphics
• Outdoor Signage
• Floor Graphics

AveryDennison®HP MPI 2121
Transit Vinyl
Removable StaFlat™
(formerly: MPI Transit Vinyl)
Revision: 9 Dated: 03/04/14
Product Data Sheet
Page 2 of 4
averygraphics.com
AnswerLine: 800-231-4654
Physical Characteristics:
Property Value
Caliper, face 3.4 mil (86µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
<0.065”(1.651 mm)
Note: Ink loads in excess of 250%
may cause increased shrinkage of
the printed film.
Tensile at Yield
Elongation
Gloss Hunter Gloss
@ 60
<16
Adhesion: 15 min. 1.0lbs/in (175 N/m)
24 hr 1.2 lbs/in (210 N/m)
1 week 1.8lbs/in (315 N/m)
Removability 1 year from most
substrates (without heat)
Flammability ASTM E84
Class 1 or A
rating
Self Extinguishing
Shelf-Life 2 years from date on label
(up to 2 years
unprocessed, OR process
within one year and apply
within 1 year of processing)
Durability Vertical
Exposure
1 year durability with clean
removability from most
OEM surfaces, with little or
no adhesive residue
Min. Application
Temperature
40° F (4° C)
Service
Temperature
-40° – 180°F (-40° – 82° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)
Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either two years (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.
Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.
NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.

AveryDennison®HP MPI 2121
Transit Vinyl
Removable StaFlat™
(formerly: MPI Transit Vinyl)
Revision: 9 Dated: 03/04/14
Product Data Sheet
Page 3 of 4
averygraphics.com
AnswerLine: 800-231-4654
Warranty Coverage Overview:
General Warranty
This film is covered by the Avery Dennison General Warranty. The film has been tested and believed to be a good
product when used as recommended in this Product Bulletin. However, for untested printer/ink combinations there is
no assurance or guarantee for the following:
• Printability
• Visual appearance
• Fitness for use
• Removability or changeability
• Damage to the substrate
• Durability
ICS Performance Guarantee
When used with the approved printer and ink combination this film is covered by the Avery Dennison Performance
Guarantee. It has been tested and believed to be a good product when used as recommended in this Product
Bulletin. However, there is no assurance or guarantee for the following:
• Fitness for use
• Removability or changeability
• Damage to the substrate
Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm)aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Removability:
• “Removable Adhesive” means an Avery Dennison® adhesive that can be removed without heat or chemicals
within the period stated on the respective Product Data Sheet and might leave twenty percent (20%) or less adhesive
residue.
Avery Dennison does not guarantee removability from the following substrates:
• Surfaces with poor paint-to-substrate adhesion
• Wallboard
• Existing graphics that must remain intact; damage to existing graphic when film is removed
• Aged paint or metal that may have surface oxidation or chalking
• Outdoor, horizontal surfaces

AveryDennison®HP MPI 2121
Transit Vinyl
Removable StaFlat™
(formerly: MPI Transit Vinyl)
Revision: 9 Dated: 03/04/14
Product Data Sheet
Page 4 of 4
averygraphics.com
AnswerLine: 800-231-4654
Limitation of End Uses:
This Avery Dennison product is not designed or recommended for the following uses. Unsuitable
applications or exposure conditions include:
• Corrugated, channels
• Compound / complex curves
• Highly-irregular surfaces
• Stainless Steel
• Paint that is not thoroughly cured or dried
• Low surface energy substrates (i.e. Tedlar®
coatings)
• Unclean or textured surfaces
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Also tested to ASTM E-84 method for surface burning characteristics of building materials. Documentation from third
party testing agency available upon request.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
Avery MPI2121 TRANSIT VINYL REM SF 3.4 mil White Matte opaque flexible calendered vinyl film 3353 5452 6315 3119