Avery MPI2610 WALL FILM 6 mil White Luster opaque calendered vinyl film with a Permanent adhesive

Description

Avery MPI2610 WALL FILM 6 mil White Luster opaque calendered vinyl film with a Permanent adhesive
Avery HP MPI 2610 Wall Film is a tough, scuff-resistant, flexible, white premium calendered vinyl film designed specifically for wall graphic applications. HP MPI 2610 offers an excellent choice for wall graphic applications that require easy installation and Permanent adhesive performance.

BCI Imaging Supplies
Avery® HP MPI 2610Wall Film
Permanent adhesive
Revision: 5 Dated: 12/17/10
Product Data Sheet
Page 1 of 3
Uses: Avery HP MPI 2610 Wall Film is a tough,
scuff-resistant, flexible, white premium
calendered vinyl film designed specifically
for wall graphic applications. HP MPI 2610
offers an excellent choice for wall graphic
applications that require easy installation
and Permanent adhesive performance.
Face: 6.0 mil (152 microns) low
gloss calendered
Adhesive:Permanent adhesive Acrylic
(clear)
Liner: 70# StaFlat
Durability: Up to 4 year
(unprinted)
Application
Surfaces:
Flat
Features:
• 100% opacity, completely covers whatever is underneath
• Matte finish
• Great image clarity and color pop
• Dimensionally stable liner for easy converting
• ICC profiles available on Avery website (www.iccprofiles.averygraphics.com)
• ASTM E84 Class 1 or A rating
Conversion:
Thermal Die-Cutting
Flat Bed Sign-Cut
Drum Roller Sign-Cut
Steel Rule Die-Cutting
Thermal Transfer
Screen Printing
Cold Overlaminating
Water based inkjet
Solvent based inkjet
Mild/Eco Solvent inkjet
UV inkjet
Latex Inkjet
To achieve the best possible print quality, please make sure the correct ICC Profile and printer setting are
used.
Common Applications:
Fleet
Vehicle
Marine/ Watercraft
Backlit Signs
Wall Murals
POP/ Tradeshow
Window Graphics
Outdoor Signage
Floor Graphics

Avery® HP MPI 2610 Wall Film
Permanent adhesive
(formerly: MPI 2601)
Revision: 5 Dated: 12/17/10
Product Data Sheet
Page 2 of 3
Graphics & Reflective Products Division AnswerLine: 800-231-4654
250 Chester Street www.averygraphics.com
Painesville, OH 44077
Physical Characteristics:
Property Value
Caliper, face 6.0 mil (152 microns)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
<0.065”(1.651 mm)
Note: Ink loads in excess of 250%
may cause increased shrinkage of
the printed film.
Tensile at Yield
Elongation
Gloss Hunter Gloss
@ 60
15
Adhesion: 15 min. 1.0 lbs/in (175 N/m)
Flammability ASTM E84
Class 1 or A
rating
Self Extinguishing
Shelf-Life 1 year
Durability Vertical
Exposure
Unprinted: Up to 4 years
Printed: Up to 3 years
Permanent adhesive
Note: If abrasion or chemical
resistance is required an
overlaminate must be used.
Min. Application
Temperature
40° F (4° C)
Service
Temperature
-40° – 180°F (-40° – 82° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)
Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either one year (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.
Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.
NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.

Avery® HP MPI 2610 Wall Film
Permanent adhesive
(formerly: MPI 2601)
Revision: 5 Dated: 12/17/10
Product Data Sheet
Page 3 of 3
Graphics & Reflective Products Division AnswerLine: 800-231-4654
250 Chester Street www.averygraphics.com
Painesville, OH 44077
Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Also tested to ASTM E-84 method for surface burning characteristics of building materials. Documentation from third
party testing agency available upon request.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied. 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Related Documents:
The following Avery Dennison literature will provide complete information to the user for proper application, storage, and
other requirements and is available upon request from your Avery Dennison representative or from the Avery Dennison
website (www.na.averygraphics.com).
Document Title Reference Number
Storage, Maintenance, and Cleaning of PVC Films Instructional Bulletin #1.10
Premask Recommendations Instructional Bulletin #5.50
Printing, Processing, and Application Instructions for Interior Wall Graphics Instructional Bulletin #6.50
Additional Notes:
Avery Graphics does not warrant damage to the interior wall surface caused by removing film even if a
removable adhesive was used. Removing a graphic can cause damage to the wall. Due to the variety of wall
surfaces Avery Graphics cannot guarantee damage free removal. The amount of damage can be reduced or eliminated
by following the inspection, cleaning and preparation guidelines provided in Instructional Bulletin #6.50.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
Avery MPI2610 WALL FILM 6 mil White Luster opaque calendered vinyl film with a Permanent adhesive

Custom Finish – CTO A112814 MPI2610 PERM Wall Film 54″ 54″
CTO A020242 MPI2610 PERM Wall Film 54X100 YDS 3IN 54″ x 100 yd
Stock A020243 MPI2610 PERM Wall Film 54X50 YDS 3IN 54″ x 50 yd
Stock A020244 MPI2610 PERM Wall Film 54X25 YDS 3IN 54″ x 25 yd
Sample A020534 MPI2610 PERM Wall Film 54 X 5 54 x 5