Avery SF100 SPECIALTY FILMS GOLD MIRROR

Description

Avery SF100 SPECIALTY FILMS GOLD MIRROR
Avery Dennison™ SF 100 polyester films are
high gloss films which are clear, white or
metalized. These films are top coated for
excellent print receptivity, and provide a
strong tear resistant surface.
Environmentally responsible alternative films
compared to traditional self-adhesive PVC
films.

BCI Imaging Supplies

Avery® SF 100 Polyester Series
Metallic, Clear, or White – Permanent – StaFlat or Kraft
(formerly: A1 or PX Series Polyesters )

Uses: Avery Dennison™ SF 100 polyester films are
high gloss films which are clear, white or
metalized. These films are top coated for
excellent print receptivity, and provide a
strong tear resistant surface.
Environmentally responsible alternative films
compared to traditional self-adhesive PVC
films.
Face: Polyester
Adhesive: Clear Permanent
Acrylic
Liner: 78# Bleached Kraft or
90# StaFlat
Durability: Up to 2 years
Application
Surfaces:
Flat
Features:
• Dimensionally stable liner for easy converting
• High gloss finish
• Excellent conversion on CAD plotters
• Easy cutting & weeding
• Excellent dimensional stability
• Excellent UV, temperature, humidity, and salt-spray resistance
• Available in clear, white, silvers, and golds
Conversion:
Thermal Die-Cutting
Flat Bed Sign-Cut
Drum Roller Sign-Cut
Steel Rule Die-Cutting
Thermal Transfer
Screen Printing
Cold Overlaminating
Water based inkjet
Solvent based inkjet
Mild/Eco Solvent inkjet
UV inkjet (with 90# liner)
Offset Printing
Common Applications:
Architectural Signage
Directional Signage
Window Graphics
Emergency Vehicles
Trains & light rail
Buses
Outdoor Advertising
Nameplates
Emblems

Avery® SF 100 Polyester Series
Metallic, Clear, or White – Permanent – StaFlat or Kraft
(formerly: A1 or PX Series Polyesters )
Revision: 2 Dated: 07/02/12
Product Data Sheet
Page 2 of 4
averygraphics.com
AnswerLine: 800-231-4654
Physical Characteristics:
Property Value
Caliper, face SF100-103-S Clear (1861SFS)
SF100-101-S White (1870SFS)
SF100-840-SBrushed Chrome
(1840SFS)
SF100-846-S Bright Chrome
(1846SFS)
2.0 mil (50 µm)
SF 100-103 Clear (1860SFS)
SF100-242-S Brushed Gold
(1842S)
SF100-247-S Double Gold
(1850S)
SF100-846-S Chrome Mirror
(1847SFS)
SF100-248-S Gold Mirror
(1848S)
1.0 mil (25 um)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
<0.015” (0.38 mm)

Tensile at Yield N/A
Elongation N/A
Gloss 90

Adhesion:
15 min.
3.0 lbs/in (525 N/m)
24 hr 3.5 lbs/in (613 N/m)
Flammability Self Extinguishing
Shelf-Life 1 year
Durability Vertical Exposure
Gold
Brushed Gold
Indoor Only
Double Sided Gold 1 Year
All Others 2 Years
Min. Application
Temperature
60° F (16° C)
Service
Temperature
-40° – 257°F (-40° –
125° C)
Chemical
resistance
Resistant to most
mild acids, alkalis,
and salt solutions.
Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)
Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either one year (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.
Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.
NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.

Avery® SF 100 Polyester Series
Metallic, Clear, or White – Permanent – StaFlat or Kraft
(formerly: A1 or PX Series Polyesters )
Revision: 2 Dated: 07/02/12
Product Data Sheet
Page 3 of 4
averygraphics.com
AnswerLine: 800-231-4654
Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied. 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Standards /Regulations:
These products meet the European Toy Regulations EN 71-3 and the January 2007 revision of the EU-Phthalates
Directive 2005/84/EC. The products also complies with the US CONEG Model Toxics Legislation, the EC Directive
94/62/EC, article 11 on packaging and packaging waste and RoHS Compliance guidelines, with reference to the
acceptable levels of heavy metals, i.e. sum of heavy metals Cadmium, Mercury, Lead and Chromium (VI) is less than 100
ppm. Also both adhesives are approved in accordance to BfR and the removable is additionally approved to FDA for food
contact.
Application:
Application on wet surfaces or using an application fluid (wet applied) may result in adhesive residues being left on the
surface after removal when using the removable adhesive product. As no two surfaces are the alike, trials are
recommended prior to use in order to ascertain clean removability.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
SPECIALTY SERIES –
78#
AVERY 100 SPECIALTY
FILMS PERMANENT KRAFT
PX SERIES –
PERMANENT
AVERY 100 SPECIALTY
FILMS PERMANENT
STAFLAT™
A1842-S Brushed Gold SF 100-242-S Brushed Gold PX 1003 Clear SF 100-103-S Clear
A1848-S Gold Mirror SF 100-248-S Gold Mirror PX 1070 Bright Chrome SF 100-846-S Chrome Mirror
A1850-S Double Gold SF 100-247-S Double Gold PX 2000 White SF 100-101-S White
A1840SF-S Brushed
Chrome SF 100-840-S Brushed Chrome PX 2003 Clear SF 100-103-S Clear
A1846SF-S Chrome
Mirror SF 100-846-S Chrome Mirror PX 2070 Bright Chrome SF 100-846-S Chrome Mirror

PX 2072 Brushed
Chrome SF 100-840-S Brushed Chrome
Avery® SF 100 Polyester Series
Metallic, Clear, or White – Permanent – StaFlat or Kraft
(formerly: A1 or PX Series Polyesters )
Revision: 2 Dated: 07/02/12
Product Data Sheet
Page 4 of 4
averygraphics.com
AnswerLine: 800-231-4654
Avery Dennison EcoFriendly is a trademark of Avery Dennison Corporation. This mark indicates
that these products and materials were produced with environmentally beneficial features. For
more specific information on Avery Dennison’s eco-friendly product features and corporate
philosophy on sustainability, go to www.averygraphics.com.
SF100-248-S PERM KR-A GOLD MIRROR 1848S429948A60R A115835 SF100-248-S PERM KR GOLD MIRROR 60″
1848SA A000415 SF100-248-S PERM KR-A GOLD MIRROR 15″ x 10 yd Pun
1848SK A000420 SF100-248-S PERM KR-K GOLD MIRROR 24″ x 10 yd
1848SE A000417 SF100-248-S PERM KR-E GOLD MIRROR 30″ x 10 yd Pun
1848SR A000423 SF100-248-S PERM KR-R GOLD MIRROR 48″ x 10 yd
1848SF A000418 SF100-248-S PERM KR-F GOLD MIRROR 15″ x 50 yd
1848SC A000416 SF100-248-S PERM KR-C GOLD MIRROR 15″ x 50 yd Pun
1848SM A000421 SF100-248-S PERM KR-M GOLD MIRROR 24″ x 50 yd
1848SQ A000422 SF100-248-S PERM KR-Q GOLD MIRROR 30″ x 50 yd
1848SG A000419 SF100-248-S PERM KR-G GOLD MIRROR 30″ x 50 yd Pun
1848SU A000424 SF100-248-S PERM KR-U GOLD MIRROR 48″ x 50 yd
0 A000413 SF100-248-S PERM KR GOLD MIRROR 54″ X 100 yd
1848SW A000426 SF100-248-S PERM KR-W GOLD MIRROR 60″ x 50 yd
1848SV A000425 SF100-248-S PERM KR-V GOLD MIRROR 60″ x 100 yd
1848SZ A000427 SF100-248-S PERM KR-Z GOLD MIRROR 60″ x 250 yd