Cart

Avery Surface Protection Film SPF1000 PERM SF ULTRA CLEAR

$93.22$2,153.91

SKU: Avery Surface Protection Film SPF1000 PERM SF ULTRA CLEAR Categories:

Description

Avery Surface Protection Film SPF1000 PERM SF ULTRA CLEAR
Avery Dennison SPF 1000 Surface Protection Film premium quality, ultraconformable, aliphatic polyurethane film with an adhesive system designed for the new generation of automotive clear-coats and other typical OEM surface finishes. SPF1000 polyurethane film is specifically designed to provide superior protection of paint surfaces from stone chips, road debris, bug stains, and weathering. This construction has been designed for use as a protective film in automotive, RV, marine, and architectural markets.

BCI Imaging Supplies

Avery Dennison®
SPF 1000
Permanent / StaFlat
Revision: 3 Dated: 09/23/14
Product Data Sheet
Page 1 of 3
averygraphics.com
AnswerLine: 800-231-4654
Uses:
Avery Dennison SPF 1000 Surface
Protection Film premium quality, ultraconformable,
aliphatic polyurethane film with
an adhesive system designed for the new
generation of automotive clear-coats and
other typical OEM surface finishes. SPF1000
polyurethane film is specifically designed to
provide superior protection of paint surfaces
from stone chips, road debris, bug stains, and
weathering. This construction has been
designed for use as a protective film in
automotive, RV, marine, and architectural
markets.
Face: 8 mil (203 microns) aliphatic
polyurethane film
Adhesive: Permanent, acrylic
pressure sensitive adhesive
Liner: 90# StaFlat
Durability: Up to 3 years (unprinted)
Application
Surfaces:
Flat, simple curves, and compound
curves
Features:
• Provides surface protection
• Gloss finish
• Conformable
• Dimensionally stable liner for easy converting
Conversion:
• Plotter Cutting
Common Applications:
• Automotive • RV • Marine
Avery Dennison®
SPF 1000
Permanent / StaFlat
Revision: 3 Dated: 09/23/14
Product Data Sheet
Page 2 of 3
averygraphics.com
AnswerLine: 800-231-4654
Physical Characteristics:
Property Value
Caliper, face 8 mil (203 microns)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability

Tensile at Yield 5,000 to 10,000 PSI
Elongation Min 250%
Gloss @ 60
Adhesion
Stainless Steel
Gel Coated
Fiberglass
Auto OEM
15 min.
24 hr
15 min.
24 hr
15 min.
24 hr
3.0 lbs/in (525 N/m)
4.2 lbs/in (735 N/m)
2.6 lbs/in (455 N/m)
3.3 lbs/in (578 N/m)
2.6lbs/in (455 N/m)
3.1 lbs/in (543 N/m)
Flammability Self Extinguishing
Shelf-Life 2 years from date on label
(up to 2 years
unprocessed, OR process
within one year and apply
within 1 year of processing)
Durability Vertical
Exposure
Unprinted – 3 years
Min. Application
Temperature
50°-90° F (10°-32° C)
Service
Temperature
-50° – 150°F (-46° – 66° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
Gravelometer (SAE J400) No ruptures. Minimum
rating of 3C
Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)
Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either two years (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.
Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.
NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.

Avery Dennison®
SPF 1000
Permanent / StaFlat
Revision: 3 Dated: 09/23/14
Product Data Sheet
Page 3 of 3
averygraphics.com
AnswerLine: 800-231-4654
Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature.
One hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied. 72 hours after application the
panels are immersed in the test fluid for the given test period. One hour after removing the panel from the fluid, the
specimen is examined for any deterioration.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
SPF1000 PERM SF Surface Protection Film ULTRA-CLEAR
3452 3453 3454 3360 3264 3263

A112826 SPF1000 PERM SF ULTRA-CLEAR 48″
A112828 SPF1000 PERM SF ULTRA-CLEAR 54″
A112830 SPF1000 PERM SF ULTRA-CLEAR 60″
A001486 SPF1000 PERM SF ULTRA-CLEAR 24″ x 10 yd
A001487 SPF1000 PERM SF ULTRA-CLEAR 48″ x 10 yd
A001409 SPF1000 PERM SF ULTRA-CLEAR 24″ x 40 yd

Additional information

Product Type

Size

, , , , , ,

Thickness

Brands

Media Type

Reviews

There are no reviews yet.

Be the first to review “Avery Surface Protection Film SPF1000 PERM SF ULTRA CLEAR”

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations