Clear Focus ReflectVue

Description

Clear Focus ReflectVue

Clear Focus ReflectVue
• Retro-reflective 5.5 mil PVC silver-gray/black multi-layer PET.
• 70/30 pattern 1.5-mm hole size.
• Flat, vertical surfaces only.
• 1 year outdoor durability.
• 3 months for clean removability.
• For exterior use where visibility is desired in daylight and retro-reflected at night.
• Not recommended for use on vehicles.
• Print compatibility: Solvent, Eco-Solvent, Latex.

http://www.clearfocus.com/tech_support/specs/ReflectVue.pdf

Exterior Mount Product Specifications Product Code: CFRVSL
10-mil silver-gray/black retro-reflective composite PVC with clear removable acrylic pressure-sensitive adhesive and
an unperforated solid paper release liner.
No warranty given or implied.
Applications
Composition
Rate of Retroreflectivity
Open Area
Vinyl Thickness (incl. adhesive)
Release Liner Thickness
Adhesive Thickness
Perforation Diameter
Standard Widths/Lengths
Dimensional Stability
Minimum Application Temperature
Service Temperature Range
Expected Lifetime Exterior
Water Resistance
Humidity Resistance
Solvent Resistance
Storage Stability
Colors Available
Printing
Installation
Removal
Windows, glass doors and other transparent surfaces where
retro-reflectivity of printed graphic is desired, e.g., in low light.
Silver-gray/black reflective PVC laminate with clear pressure-
sensitive adhesive coating and an unperforated solid paper
release liner.
50 (cd.lx-1.m2)
40% (approx.)
10 mils (.010 in./260 microns), approx.
6 mils (.006 in./152 microns), approx.
1.1 mils (.0011 in./28 microns), approx.
.063 in. (1.6 mm)
48 in. x 100 & 1000 ft. (1.22 m x 30.48 & 304.8 m) Custom sizes
available by special order.
Good
41° F (5° C)
10° F to 125° F (-12° C to 52° C)
1 year. Adhesion may increase with time. Testing recommended
before production.
Immersion in water not recommended. If exposed to rain, the use
of an optically clear, compatible overlaminate is recommended
to prevent holes from filling with water. (Lamination may reduce
reflectance.)
Fair
Good
1-year shelf life when stored at 72° F (21° C) and 50 to 55% relative
humidity.
Silver-gray on print side and black on adhesive side.
Use standard solvent-based inks designed for vinyl. Print on the
silver-gray side, not on the release liner.
Apply to clean, dry glass surface. Prior to application, clean glass
with mild soap and water, rinse and dry well. Do NOT use ammonia,
Windex® or other solvent-based glass cleaners as they may
adversely affect the film’s adhesive.
Remove by peeling from surface. Remove adhesive residue on
older installations, if necessary. Due to its material composition,
ReflectVue may require more time and effort to remove than
other CLEAR FOCUS perforated films. For easier removal, use a
solvent-based glass cleaner (e.g., Windex®), an industrial adhesive
remover (e.g., Rapid Remover™, produced by RapidTac, Inc.), or
a heat source (e.g., heat gun), carefully following the product
manufacturer’s instructions.