General Formulations Concept 214

Description

General Formulations Concept 214

General Formulations Concept 214
3.2 Mil Calendered Matte White Inkjet Vinyl with Permanent Adhesive.
• Up to 2 year outdoor durability.
• Clear, acrylic, permanent adhesive.
• 70lb layflat PE coated liner.
• Great for interior or exterior signage, decals, nameplates, die-cut letters and POP.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex and Screen Print.

http://generalformulations.com/PDFs/214%20VFWM-AP.pdf

Product Bulletin

Manufacturer of Pressure Sensitive Films,
Traffic Graffic Floor Advertising Films,
Custom Coatings and Printing Inks.

309 S. Union • P.O. Box 158 • Sparta, Michigan 49345 • (616) 887-7387 • (800)253-3664 • FAX (616)887-0537
Web Site: www.generalformulations.com • e-mail: [email protected]

We believe the information on this product to be accurate. However, since we cannot anticipate or control the conditions under which this information or our products may be used, we cannot guarantee
results obtained through their use. Tests of our products should be made by users to determine the suitability of these products for a specific purpose. The products are sold without warranty, either
express or implied. The purchaser should refer to General Formulations, Inc’s Price List for Terms and Conditions or Sale, Including Disclaimer of Warranties and Limitation of Liability.

Concept
®
214
FLEXIBLE WHITE MATTE VINYL
PERMANENT ADHESIVE E

ConceptÒ
214 is a 3.2-mil white matte flexible calendared PVC film coated with 200-5000 permanent acrylic pressure sensitive
adhesive laminated to an 80# clay coated kraft liner. This vinyl film is designed to accept a variety of solvent-based and UV curable
inks common to wide format digital printing systems. Adhesive 200-5000 produces permanent bond to a variety of common
substrates used in graphics applications.

Applications ConceptÒ
214 is designed for interior or exterior signage, decals, nameplates and point of

Thickness Film 3.2 mils.
Adhesive .8 to 1.0 mils.
Liner 4.5 mils.
(Thickness variance +/- 10%)

Dimensional Stability Good under normal conditions.
Heat and age may accelerate vinyl shrinkage.

Temperature Ranges Minimum application temperature +40°F.
Service temperature range -40°F to +180°F.

Expected Exterior Exposure Up to 4 years under normal exposure conditions.

Adhesion To stainless steel 48 oz/in.
PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity.
Typical values. Individual values may vary.
Test thoroughly before production.

Water Resistance Limited immersion resistance. Test for specific application.
Humidity Resistance Good.
Storage Stability One (1) year shelf life when stored at 70°F and 50% relative humidity.

Product Codes 214-30 (30” X 150’ roll)
214-54 (54” X 150’ roll)
214-60 (60” X 150’ roll)

Recommendations Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent
penetration resulting in vinyl degradation.