Description
DAF Speed Vinyl
Speed Vinyl Reinforced Slip Resistant Pebble-finished Print Vinyl with Clean-Remove High Tack Adhesive Back
DAF Speed Vinyl is a one-step solution for short-term floor and wall graphics with no need for over-lamination or extra protection!
KEY FEATURES AND BENEFITS
- White-face print film.
- Slip-resistant (tested to UL-410).
- Polyester reinforcement–resists stretching and deformation
- Expected outdoor durability: 1 week – 2 months under normal conditions, depending on the surface. Actual results may vary if exposed to extreme conditions.
- Expected indoor durability: 1 – 3 months under normal conditions.
- Surface: Matte textured pebble finish.
- Adhesive: high-tack, removable adhesive.
- Final tack: 48 hours.
- Use with Solvent, Eco, UV, and Latex printers. (A pre-test is always recommended.)
- Promotional applications on surfaces like Sealed Floors and other indoor smooth surfaces. Product construction is designed for fast installation onto clean & dry surfaces. Minimum install temperature is above 50 degrees F. Rounded corners or soft-shaped graphics will be less prone to lifting. For uncommon or critical surfaces, a pretest is recommended. Not recommended for high textured surfaces.
PRODUCT SPECIFICATIONS
Construction: Pebble-embossed white print vinyl with polyester reinforcement and a high-tack removable adhesive.
Thickness: 10 mil (-/+0.5mil)
Put-Up: 82 feet
Standard Widths: 54”
Finishes: Matte
Adhesive: High-tack removable
Part # and Standard Sizes (Each roll is suspended and individually boxed.)
- RSPEEDVINYL-5482