Digi Connect ME Module w/2 MB Flash, 8 MB RAM, Plug and Play Firmware (*MOQ May Apply)

Description

Digi Connect ME Module w/2 MB Flash, 8 MB RAM, Plug and Play Firmware (*MOQ May Apply)
DC-ME-01T-S
The Digi Connect ME is a secure device server module that delivers complete and versatile embedded IPv6-ready network connectivity and strong standards-based encryption services such as SSL/SSH. Built on leading Digi 32-bit NET+ARM technology, the Digi Connect ME is cost effective and easy to use in existing and new product designs, while powerful enough to meet future product performance needs. The connector-style module is pin-compatible and interchangeable with the
Digi Connect® Wi-ME, providing a direct migration path to a wireless solution without the traditional complexities of hardware and software integration work.

Digi Connect ME is available pre-loaded with Digi plug-and-play firmware, which eliminates software development efforts by providing powerful and configurable IPv4/IPv6 device server functionality, including an easy-to-use web user interface and security features. Target applications include retail systems, security/access control, medical devices and building/industrial automation.

In addition, the Digi JumpStart Kit® for the IPv6-ready Thread-X based
NET+OS® development platform delivers an easy-to-use, affordable development solution for custom embedded applications. The kit provides the integrated building blocks to quickly and cost-effectively create flexible and secure embedded applications for integrated high-performance networking solutions.

Features
Integrated 10/100 Mbit Ethernet interface
Strong enterprise-grade network security
Common family footprint for wired and wireless modules
High-speed serial interface (UART)
Documentation
PDF Hardware Reference
PDF Command Reference
PDF Handware Reference Manual
Specifications Digi Connect ME
Hardware
Processor Type 32-bit Digi NS7520 processor
ARM Core ARM7TDMI
Processor Speed 55 MHz
Memory Base Population 2/4 MB NOR flash
8 MB SDRAM
Pins/Form Factor RJ-45 connector style with 20-pin micro pin header (Samtec FTS-110-01-F-DV-TR)
High-Speed TTL Serial Interface Up to 230 Kbps data rate
Full signal support for TXD, RXD, RTS, CTS, DTR, DSR and DCD
Hardware/Software flow control
GPIO Up to 10 shared with 1 external IRQ
JTAG Interface NET+OS development modules only (P/N DC-ME-01T-JT, DC-ME4-01T-JT)
Wave-Solderable Design No clean flux process
Dimensions (L x W x H) 1.445 in (36.7 mm) x 0.75 in (19.05 mm) x 0.854 in (21.69 mm)
Network Interface – Wired
Standard IEEE 802.3
Physical Layer 10/100Base-T
Data Rate 10/100 Mbps (auto-sensing)
Mode Full- or half-duplex (auto-sensing)
Connector RJ-45
Integrated Ethernet MAC/PHY Yes
PoE Power Pass-Through Yes
Environmental
Operating Temperature -40° C to +85° C (-40° F to +185° F)
Storage Temperature
Relative Humidity 5% to 90% (non-condensing)
Altitude 12,000 feet (3,658 meters)
Power Requirements (3.3V)
Maximum 270 mA (891 mW)
Regulatory Approvals
FCC Part 15 Class B, EN 55022 Class B Yes
EN 61000-3-2 and EN 61000-3-3 Yes
ICES-003 Class B, VCCI Class II, AS 3548 Yes
FCC Part 15 Sub C Section 15.247 Yes
IC RSS-210 Issue 5 Section 6.2.2(o) Yes
EN 300 328, EN 301 489-17 Yes
UL 60950-1, EN 60950 (EU) Yes
CSA C22.2, No. 60950 Yes
EN 55024 Yes
Warranty
Product Warranty 3 years