Stock and delivery estimates available before fulfillment
Confirm Stock / Request ETA
Stock check
Need availability or a delivery estimate?
Send the item and timing you need. We will check the appropriate distributor location and reply with current availability, an ETA, or a suitable alternative.
Digi ConnectSensor+ battery-powered cellular gateway w/ I/O, Wired HART and Modbus protocol support & weatherproof enclosure (LTE AT&T)
CSENSE-A310
Digi Connect Sensor is a fully integrated, battery powered cellular gateway with I/O for connecting to a wide range of external sensors. Designed to work in rugged industrial environments, the sensor is the ideal solution for companies looking to add remote monitoring in places where power is not easily available. Its easy installation, reliability and low data usage make remote monitoring possible in areas where it was previously cost prohibitive.
Features
Weatherproof enclosure with wide temperature range makes it ideal for use in all environments
Configurable read and report intervals with threshold and delta alarms
Low cellular data usage that is consistent and predictable
Multiple configurable I/O make it possible to connect to multiple sensor types
External, configurable power outputs eliminate the need for sensor power supplies
Penta band cellular module enables global connectivity
Available with bundled cellular service
Digi Connect Sensor is a fully integrated, battery powered cellular gateway with I/O for connecting to a wide range of external sensors. Designed to work in rugged industrial environments, the sensor is the ideal solution for companies looking to add remote monitoring in places where power is not easily available. Its easy installation, reliability and low data usage make remote monitoring possible in areas where it was previously cost prohibitive.
7.2 V, 14.5 Ah, Lithium thionyl chloride, non-rechargeable, replaceable; Approximately 2 years (@ 2 reads/transmits per day)
POWER DRAW, SLEEPING
86.4 uW
POWER DRAW, PEAK TRANSMIT
14.4 Watts
ANALOG I/O
INPUTS
4, Configurable as 4/20 mA or 0-10 VDC Analog inputs
INPUT VOLTAGE RANGE
0-10.5 V (Analog input)
INPUT CURRENT RANGE
4-22 mA (Current loop input)
DIGITAL I/O
PORTS
1 digital I/O or pulse counter input
INPUT RANGE
0-0.6 VCD logic low; 2.2 V-30 VDC logic high
MAX INPUT VOLTAGE
30 VDC
MAX PULSE COUNT FREQUENCY
2 KHZ
DIGITAL OUTPUT
Open collector output, max sink current 450 mA
OUTPUT POWER
PORTS
5
OUTPUT VOLTAGE OPTIONS
3.3, 5, 15, 24 VDC
MAX CURRENT OUTPUT
200 mA per sensor
ENVIRONMENTAL
OPERATING TEMPERATURES
-35˚ C to +70˚ C
STORAGE TEMPERATURE
-40˚ C to +85˚ C
RELATIVE HUMIDITY
90%
BATTERY DISCHARGE
<1%/year if stored at +30˚ C
PHYSICAL
DIMENSIONS (L x W x H)
152.4 mm x 108.4 mm (127 mm including glands) x 74.6 mm
WEIGHTS
264 g
LEDS INDICATORS
Battery, cellular, sensor and bluetooth
ENCLOSURE MATERIAL
Lexan
REGULATORY APPROVALS
SAFETY
UL60950-1, CAN/CSA C22.2 No. 60950-1-01, IEC 60950-1:2005 (Second Edition); Am1:2009 + Am2:2013, EN 60950-1:2006 / A11:2009 / A1:2010 / A12:2011 / A2:2013 and EN 60950-22:2006;
Class 1, Division II, groups A,B,C,D; ANSI/ISA 12.12.01:2015,CAN/CSA C22.2 No 213-15, 1st Ed ATEX (pending) EN 60079-0:2012+A11:2013, EN 60079-15:2010, eII 3 G Ex nA nC IIC T6 Gc
EMISSIONS
FCC part 15 Subpart B class B, EN55022: 2010/AC: 2011 class B, IECS-003 Issue 5: 2012 class B
Digi Connect Sensor is a fully integrated, battery powered cellular gateway with I/O for connecting to a wide range of external sensors. Designed to work in rugged industrial environments, the sensor is the ideal solution for companies looking to add remote monitoring in places where power is not easily available. Its easy installation, reliability and low data usage make remote monitoring possible in areas where it was previously cost prohibitive.
