Digi RabbitCore RCM3209 3200-II Microprocessor Core Module w/512K Flash/256K SRAM & 3.15-3.45 V DC/325 mA input

Description

Digi RabbitCore RCM3209 3200-II Microprocessor Core Module w/512K Flash/256K SRAM & 3.15-3.45 V DC/325 mA input
20-101-1179

Based on the Rabbit® 3000, the RabbitCore RCM3209 series provides the capability to integrate real-time control and Ethernet connectivity into your design. Engineers are freed from the limitations of serial port communications, allowing worldwide connectivity using low-cost networking hardware. The RCM3209 series replaces the previous RCM3200 versions as it adds the full industrial temperature spec.

The RCM3209 series and Dynamic C® are designed in a complementary fashion for maximum performance and ease of use. Rabbit’s industry-proven Dynamic C is a C language environment that includes an editor, compiler and in-circuit debugger; no in-circuit emulator is required. An extensive library of drivers, sample programs and royalty-free TCP/IP stack with source code is included.

The RCM3200 RabbitCore module series is a compact, simple solution to implement embedded functionality with options for 10/100Base-T Ethernet connectivity and industrial temperature range.

RabbitCore modules mount directly onto a user-designed motherboard and act as the controlling microprocessor for the system. The Ethernet device used on the RCM3209 series is able to detect automatically whether a crossover cable or a straight-through cable is being used in a particular setup, and will configure the signals on the Ethernet jack interface accordingly.

Features

Rabbit 3000 microprocessor at 44 MHz
Optional 10/100Base-T Ethernet
512K Flash / 256K SRAM / 512K Program Execution SRAM
52 digital I/O and 6 serial ports for multiple connectivity options
Product Type RCM3209 RCM3229
Features
Microprocessor Rabbit® 3000 at 44 MHz
EMI Reduction Spectrum spreader for reduced EMI (radiated emissions)
Ethernet Port 10/100Base-T, RJ-45, 3 LEDs N/A
Flash Memory 512K
Data SRAM 256K
Program Execution SRAM 512K
Backup Battery Connection for user-supplied backup battery (to support RTC and data SRAM)
General-Purpose I/O 52 parallel digital I/0 lines:
44 configurable I/O
4 fixed inputs
4 fixed outputs

Additional Inputs Startup mode (2), reset in
Additional Outputs Status, reset out
External I/O Bus Can be configured for 8 data lines and 6 address lines (shared with parallel I/O lines), plus I/O read/write
Serial Ports 6 shared high-speed, CMOS-compatible ports:
All 6 configurable as asynchronous (with IrDA), 4 as clocked serial (SPI), and 2 as SDLC/HDLC (with IrDA)
1 asynchronous serial port dedicated for programming
Support for MIR/SIR IrDA transceiver

Serial Rate Maximum asynchronous baud rate = CLK/8
Slave Interface A slave port allows the RCM3209/RCM3229 to be used as an intelligent peripheral device slaved to a master processor, which may either be another Rabbit 3000 or any other type of processor
Real-Time Clock Yes
Timers Ten 8-bit timers (6 cascadable), one 10-bit timer with 2 match registers
Watchdog/Supervisor Yes
Pulse-Width Modulators 10-bit free-running counter and four pulse-width registers
Input Capture 2-channel input capture can be used to time input signals from various port pins
Power 3.15V to 3.45VDC 325 mA @ 3.3V 3.15V to 3.45VDC 190 mA @ 3.3V
Quadrature Decoder Edge connectors for interface with 52-pin mini PCI Express socket
Operating Temperature -40° C to +85° C
Humidity 5% to 95%, non-condensing
Connectors Two 2 × 17, 2 mm pitch
Board Size 1.850” × 2.725” × 0.86” (47 mm × 69 mm × 22 mm)
Product Warranty 3 years