Digi RabbitCore RCM4010 Communications and Control Processor w/512K16-bit Flash / 512K 16-bit SRAM & 3.0-3.6 V DC, 90 mA @ 3.3 V (preliminary, pins unloaded) input (10Base-T) (*MOQ May Apply)

Description

Digi RabbitCore RCM4010 Communications and Control Processor w/512K16-bit Flash / 512K 16-bit SRAM & 3.0-3.6 V DC, 90 mA @ 3.3 V (preliminary, pins unloaded) input (10Base-T) (*MOQ May Apply)
20-101-1112

The RCM4000 series is designed to mount directly to a usersupplied motherboard and acts as the microprocessor of the embedded system. The microprocessor features 28 GPIO lines shared with up to five serial ports and four levels of alternate pin functions that include variable phase PWM, quadrature decoder and input capture.

The RCM4000 series, with its robust feature set, ample memory, 10Base-T Ethernet and analog, is ready for network connectivity and I/O control for true device Internet communication and control. Evaluation is easy with the RCM4000 development kit.

The RCM4000 RabbitCore module delivers the features and internet connectivity to design embedded systems that users can monitor and control remotely from any location.

The RCM4000 series features a small footprint of 1.84” × 2.42” × 0.77” (47 mm × 61 mm × 20 mm), complete with the Rabbit® 4000 microprocessor, program memory, SRAM, mass storage. and 10Base-T Ethernet connectivity.

RabbitCores mount directly onto a user designed motherboard, and can interface with CMOS-compatible digital devices via the user’s motherboard. Programs are developed with our industry-proven Dynamic C development system that includes an editor, compiler, and in-circuit debugger.

Developing with RabbitCores

The RabbitCore family of microprocessor core modules is designed to facilitate rapid development and implementation of embedded systems. Develop programs with our industry-proven Dynamic C® development system, a C-language environment that includes an editor, compiler, and in-circuit debugger.

Download the program from your PC via USB or serial port, and debug right on the target hardware – no in-circuit emulation is required. This environment reduces effort and speeds hardware and software integration. Rabbit provides an extensive library of drivers and sample programs, along with royalty-free TCP/IP stack with source.

An RCM4000 Development Kit provides the essentials that you need to design your own microprocessor-based system, and includes a complete Dynamic C software development system. The Development Kits also contains a Prototyping Board that will allow you to evaluate the RCM4000 series module and to prototype circuits that interface to the module. You will also be able to write and test software for the module.

Features

Rabbit 4000 running at 59 MHz
Up to 1 MB (16-bit) Program Flash, 1 MB (16-bit) SRAM, and 32 MB of Flash memory
10Base-T Ethernet (RJ-45 connector)
Up to 28 GPIO and up to 5 serial ports
8 channels 12-bit A/D converter
Documentation
PDF Data Sheet
PDF User’s Manual
Specifications RCM4000 RCM4010
Features
Microprocessor Rabbit® 4000 at 59 MHz
EMI Reduction Spectrum spreader for reduced EMI (radiated emissions)
Ethernet Port 10Base-T, RJ-45, 2 LEDs
SRAM (16-bit) 512K
Flash Memory (16-bit) (program) 512K
Serial Memory (data) (NAND flash) 32 MB (NAND flash)
Backup Battery Connection for user-supplied backup battery (to support RTC and data SRAM)
General Purpose I/O 22 parallel digital I/O lines:
Configurable with 4 layers of alternate functions
28 parallel digital I/O lines:
Configurable with 4 layers of alternate functions

Additional Inputs 2 startup mode, reset in, CONVERT 2 startup mode, reset in
Additional Outputs Status, reset out, analog VREF Status, reset out
Analog Inputs 8 channels single-ended or 4 channels differential programmable gain 1, 2, 4, 5, 8, 10, 16 and 20 V/V —
A/D Converter Resolution 12 bits (11 bits single-ended) —
A/D Conversion Time (including 120 μs raw counted and Dynamic C) 180 μs —
Auxiliary I/O Bus 8 data lines and 6 address lines (shared with parallel I/O lines), plus I/O read/write
Serial Ports 5 shared high-speed, CMOS-compatible ports:
All 5 configurable as asynchronous (with IrDA), 4 as clocked serial (SPI), and 1 as SDLC/HDLC
1 asynchronous clocked serial port shared with programming port
4 shared high-speed, CMOS-compatible ports:
All 4 configurable as asynchronous (with IrDA) or as clocked serial (SPI)
1 asynchronous clocked serial port shared with programming port

Serial Rate Maximum asynchronous baud rate = CLK/8
Slave Interface Slave port allows the RCM4000 to be used as an intelligent peripheral device slaved to a master processor
Real Time Clock Yes
Timers Ten 8-bit timers (6 cascadable from the first), one 10-bit timer with 2 match registers, and one 16-bit timer with 4 outputs and 8 set/reset registers
Watchdog/Supervisor Yes
Pulse-Width Modulators — 2 channels:
Synchronized PWM with 10-bit counter
Variable-phase synchronized PWM with 16-bit counter

Quadrature Decoder — 2-channel quadrature decoder accepts inputs from external incremental encoder modules
Power 3.0– 3.6 VDC, 90 mA @ 3.3V (preliminary, pins unloaded)
Operating Temperature 0° C to +70° C
Humidity 5% to 95%, non-condensing
Connectors Programming header
Board Size 1.84” × 2.42” × 0.77” (47 mm × 61 mm × 20 mm)