The Digi TransPort WR31 is an intelligent 4G LTE router designed for critical infrastructure and industrial applications. It provides a secure, reliable connection to industrial controllers, process automation equipment and smart grid assets on third party sites or remote locations. Software defined, multi-carrier networking and global LTE and HSPA+ options make it easy to get connected. This drop-in connectivity gives operators a way to reduce downtime and service calls and also increase revenue by bringing distributed sites online faster.
IDEAL FOR CONNECTING:
- Building and process automation controllers
- Smart grid assets (meters, switches, controllers)
- IP cameras and access controllers
- Remote data loggers, flow meters and sensing equipment
- Telco infrastructure
- Traffic and obstruction lighting
Documentation
 PDF Data Sheet
PDF Quick Start Guide
User Guide
|
SPECIFICATIONS
|
Digi TransPort WR31
|
|
WIRELESS INTERFACES
|
|
LTE – ANZ/LATAM (L9)
|
LTE-Advanced CAT 6: 700(B28)/850(B5,B18,B19)/900(B8)/1500(B21)/1800(B3)/1900(B39)/2100(B1)/
2600(B7,B38)/2300(B40)/2500(B41)
3G HSPA+: 800/850/900/1700/2100 MHz
Transfer rate (max): 300 Mbps down, 150 Mbps up
|
|
LTE – NORTH AMERICA (M5)
|
LTE CAT 4: 700(B12,13)/850(B5)/AWS(B4)/1900(B2)
3G HSPA+: 850/1900 MHz
Transfer rate (max): 150 Mbps down, 50 Mbps up
Approvals: PTCRB, AT&T, Telus (pending)
|
|
LTE – EMEA/APAC (M7)
|
LTE CAT 4: 800(B20)/900(B8)/1800(B3)/2100(B1)/2600(B7)
HSPA: 900/2100 MHz
EDGE: 900/1800 MHz
Transfer rate (max): 150 Mbps down, 50 Mbps up
Approvals: Vodafone (pending)
|
|
LTE 450 – EMEA/APAC (M2)
|
LTE CAT 3: 450(B31)/800(B20)/1800(B3)/2600 (B7)
HSPA+: 900/2100 MHz
EDGE: 900/1800 MHz
Transfer rate (max): 100 Mbps down, 50 Mbps up
|
|
GLOBAL HSPA+ (U9)
|
3G HSPA+: 850/900/1700AWS/1900/2100 MHz
2G EDGE/GPRS: 850/900/1800/1900 MHz
Transfer rate (max): 21 Mbps down, 5.76 Mbps up
Approvals: PTCRB, Vodafone
|
|
CDMA EV–DO 450 MHZ – EMEA (D5)
|
3G EVDO Rev B: 450 MHz
2G 1XRTT: 450 MHz
Transfer rate (max): 14.7 Mbps down, 5.4 Mbps up
|
|
CONNECTORS
|
(2) 50 Ω SMA (Center pin: female)
|
|
SIM SLOTS
|
(2) Mini-SIM (2FF)
|
|
SIM SECURITY
|
Screw-down SIM cover
|
|
SOFTWARE & MANAGEMENT
|
|
REMOTE MANAGEMENT
|
Digi Remote Manager® (cloud based); SNMP v1/v2c/v3 (user installed/managed)
|
|
LOCAL MANAGEMENT
|
WebUI (HTTP/HTTPS); CLI (Telnet, SSH, SMS)
|
|
MANAGEMENT/ TROUBLESHOOTING TOOLS
|
FTP, SFTP, SCP; Protocol analyzer with PCAP for Wireshark; Event logging with Syslog and SMTP; NTP/SNTP
|
|
WIRED INTERFACES
|
|
PORTS
|
(2) RJ-45; 10/100 Mbps (auto-sensing)
|
|
PORTS
|
(1) DB-9; DCE
|
|
STANDARD
|
RS-232/422/485
|
|
SIGNAL SUPPORT
|
TXD, RXD, RTS, CTS, DTR, DCD, DSR, RI
|
|
FLOW CONTROL
|
Software (XON/XOFF), Hardware supported
|
|
CONNECTOR
|
5-pin screw down terminal block
|
|
DIGITAL
|
0-30 VDC, 200mA max.; (2) I/O, software -selectable
|
|
ANALOG
|
(1) analog I/O; 4-20mA or 0-10V, Software selectable; 12 bit resolution
|
|
PORTS
|
(1) USB 2.0 Type A
|
|
PHYSICAL
|
|
DIMENSIONS (L X W X H)
|
5 in x 3.5 in x 2 in (12.7 cm x 8.9 cm x 5.1 cm)
|
|
WEIGHT
|
1.1 lb. (.5 kg)
|
|
STATUS LEDS
|
Power, Service, WWAN, 3x Signal strength, User Programmable
|
|
ENCLOSURE/RATING
|
Aluminum / IP30
|
|
MOUNTING
|
DIN rail mount included
|
|
POWER REQUIREMENTS
|
|
POWER INPUT
|
9 – 30 VDC, 18W min power source required
|
|
POWER CONNECTOR
|
Screw down removable terminal block
|
|
POWER CONSUMPTION
|
4W typical (Idle); 12W typical (Peak Tx/Rx)
|
|
ENVIRONMENTAL
|
|
HAZARDOUS (CLASS 1 DIV 2)
|
Yes
|
|
OPERATING TEMPERATURE
|
-34° C to +74° C (-29° F to +165° F); (Reduced cellular performance may occur above +60° C)
|
|
STORAGE TEMPERATURE
|
-40° C to +85° C (-40° F to +185° F)
|
|
ETHERNET ISOLATION
|
1.5 kV RMS
|
|
SERIAL PORT PROTECTION (ESD)
|
15 kV
|
|
RELATIVE HUMIDITY
|
5% to 95% (non-condensing)
|
|
APPROVALS
|
|
CELLULAR
|
PTCRB
|
|
SAFETY
|
Hazardous locations: ANSI/ISA-12.12.01-2015, CAN/CSA C22.2 NO.213-15
Ordinary locations: UL 60950-1, 2nd Edition, 2014-10-14; UL 62368: 2014, 2nd Edition
ATEX standards: Protection method  II 3 G Ex nA IIC T4 Gc
EN 60079-0:2012+A11:2013, EN 60079-15:2010, DEMKO 15 ATEX 1574X Rev. 1
|
|
IECEX STANDARDS
|
US/UL/ExTR17.0077/00
|
|
EMISSIONS/IMMUNITY
|
CE, FCC Part 15 Class B, AS/NZS CISPR 22, EN55024, EN55022 Class B
|
|
WARRANTY
|
|
PRODUCT WARRANTY
|
5 years
|
|
ENTERPRISE SOFTWARE
|
DESCRIPTION
|
|
PROTOCOL SUPPORT
|
HTTP, HTTPS, FTP, SFTP, SSL, SNMP, SNMP (v1/v2c/v3), SSH, Telnet and CLI for web management; Remote management via Digi Remote Manager; SMS management, protocol analyzer, ability to capture PCAP for use with Wireshark; DynDNS, Dynamic DNS client compatible with BIND9/No-IP/DynDNS
|
|
SECURITY/VPN
|
IP filtering, stateful inspection firewall with scripting, address and port translation; VPN: IPSec with IKEv1, IKEv2, NAT Traversal; SSL, SSLv2, SSLv3, FIPS 197, Open VPN client and server; PPTP, L2TP; (5) VPN tunnels (upgradable to a maximum of 50); Cryptology: SHA-1, MD5, RSA; Encryption: DES, 3DES and AES up to 256-bit (CBC mode for IPsec); Authentication: RADIUS, TACACS+, SCEP for X.509; certificates; Content filtering (via 3rd party); MAC address filtering; VLAN support
|
|
ROUTING/FAILOVER
|
IP pass-through; NAT, NAPT with IP port forwarding; Ethernet bridging; GRE; Multicast routing; Routing protocols: PPP, PPPoE, RIP (v1, v2) OSPF, SRI, BGP, iGMP routing (multicast); RSTP (Rapid Spanning Tree Protocol); IP failover: VRRP, VRRP+TM; Automatic failover/failback to second GSM network/standby APN
|
|
OTHER PROTOCOLS
|
DDHCP; Dynamic DNS client compatible with BIND9/No-IP/DynDNS; QoS via TOS/DSCP/WRED; Modbus UDP/TCP to serial; X.25 including XOT, SNA/IP, TPAD and PAD; Protocol switch; Modbus bridging for connecting diverse field assets
|
|
Aadarsh (verified owner) –
Good quality.
Ryder (verified owner) –
Good service.
Anthony (verified owner) –
Very fast delivery.
Richard (verified owner) –
Good quality.