Digi TransPort WR41 HSUPA Generic, Telemetry 2, WiFi, Encryption, 5 VPN Tunnels, Int Power Supply and Antennas
WR41-U4T2-WV1-SW
The Digi TransPort WR41 cellular router offers a robust communications solution with true enterprise class routing, security and firewall. This multifunction cellular router features a flexible design with optional integrated Wi-Fi access point (with multi SSID) / Client, USB, serial and single port Ethernet switch, as well as a variety of configuration options including multiple serial ports (async or sync), GPS or I/O telemetry modules.
The Digi TransPort WR41 offers an advanced routing, security and firewall feature set including stateful inspection firewall and integrated VPN. Enterprise class protocols incorporate BGP, GRE, OSPF and VRRP+, a patented technology built upon the popular VRRP failover standard providing true autosensing, auto-failure and auto-recovery of any line drop. Digi TransPort WR41 routers are ideal for PCI compliant applications including advanced security, logging and firewall features.
Digi remote management software provides easy setup, configuration and maintenance of large installations of Digi TransPort devices.
Features
Enterprise class cellular routers with advanced dynamic routing, security and firewall features
CAN Bus support and rugged enclosure options
High speed cellular interfaces
Optional integrated 802.11a/b/g/n Wi-Fi access point
Flexible interfaces including serial (async/sync), GPS, USB and telemetry, with flexible DC power options
Powerful integrated end user programming
Digi remote management software for easy setup, configuration and maintenance
The Digi TransPort WR41 cellular router offers a robust communications solution with true enterprise class routing, security and firewall. This multifunction cellular router features a flexible design with optional integrated Wi-Fi access point (with multi SSID) / Client, USB, serial and single port Ethernet switch, as well as a variety of configuration options including multiple serial ports (async or sync), GPS or I/O telemetry modules.
The Digi TransPort WR41 offers an advanced routing, security and firewall feature set including stateful inspection firewall and integrated VPN. Enterprise class protocols incorporate BGP, GRE, OSPF and VRRP+, a patented technology built upon the popular VRRP failover standard providing true autosensing, auto-failure and auto-recovery of any line drop. Digi TransPort WR41 routers are ideal for PCI compliant applications including advanced security, logging and firewall features.
Digi remote management software provides easy setup, configuration and maintenance of large installations of Digi TransPort devices.
700 MHz (Band 13), 2G/3G fall back to CDMA 850/1900 MHz; Transfer rate (max): 50 Mbps Up, 100 Mbps Down
LTE – AT&T
700 MHz (Band 17) / AWS, 3G fall back to HSPA 850/AWS/1900/2100 MHz; 2G fallback to 850/900/1800/1900 MHz; Transfer rate (max): 50 Mbps Up, 100 Mbps Down
LTE – EMEA (L4)
800/900/1800/2100/2600 MHz; 3G fall back to HSPA+ 900/2100 MHz; 2G fall back to 900/1800/1900 MHz
GSM/CDMA Gobi (U8)
GSM and CDMA supported on the same module via Gobi diversity; UMTS/HSPA/HSPA+ (850/900/1700 AWS/1800/1900/2100 MHz with Rx Diversity); EV-DO Rev A (800/1900 MHz with Rx Diversity); Transfer rate (max): 5.76 Mbps Up, 14.4 Mbps Down
Edge (E1)
GPRS/EDGE Class 10; 850/900/1800/1900 MHz; Transfer rate (max): 236 Kbps Up/Down
CDMA EV-DO (Dx)
450 MHz; EV-DO Rev B; R-UIM support; Transfer rate (max): 14.7 Mbps Up, 5.4 Mbps Down
Connector
U8, L2, & L3 variants: 2 x 50 Ω SMA (Center pin: female); E1, Cx, Bx variants: 1 x 50 Ω SMA (Center pin: female)
SIM Slots
2
SIM Security
Optional SIM slot cover plate
Wireless Interfaces – Wi-Fi*
Standard
Option of 802.11b/g or 802.11b/g/n
Modes
Access point, Client and support for multiple SSID
Transmit Power
17 dBm ± 2 dBm
Receive Sensitivity
54 Mbps / -70 dBm and 11 Mbps / -83.5 dBm
Security
Open or shared key authentication; WEP (64 and 128 bit) encryption; WPA/WPA2 with Radius (WPA Enterprise and pre-shared keys)
Connector
2 x 50 Ω RP-SMA (Center pin: male)
Wireless Interfaces – GPS*
Channels
50
Sensitivity
-163 dB
Protocol
NMEA 0183 V2.3 sentence output; +3.3 VDC active antenna drive; NMEA stream to local serial port or over TCP/IP
Navigation
Galileo ready
Augmentation
SBAS
Cold Start
< 27 seconds TTFF (90%)
Horizontal Accuracy
< 2.5 meters (90%)
Velocity Accuracy
0.1m/s
Connector
1 x 50 Ω SMA (Center pin: female)
Wired Interfaces – Serial
Ports
1; Expansion cards available to increase serial ports
Standard
RS-232; Expansion cards available in RS-422/RS-485
Async/Sync
Async; Expansion cards available in sync
DTE/DCE
DCE
Signal Support
TXD, RXD, RTS, CTS, DTR, DCD
Flow Control
Software (XON/XOFF), Hardware supported
COM Port Redirector
RealPort®
Connector
RJ-45
Wired Interfaces – Ethernet
Ports
1
Standard/Physical Layer
IEEE 802.3; 10/100 Base-T
Data Rate/Mode/Interface
10/100 Mbit/s; Full or Half duplex; Auto MDI/MDIX
Connector
RJ-45
Wired Interfaces – I/O
Digital I/O
Extended temperature variants: Input 4 – 28 VDC / Output: 28 VDC 50 mA max
Connector
Extended temperature variants: 4-pin Molex (only 2 pins are used for I/O; the other 2 pins are used for DC power
Wired Interfaces – USB
Ports
1
Standard
USB 2.0
Signaling
Full- or low-speed
Connector
Type A
Other
Expansion Cards
Optional expansion cards available for GPS, fleet, telemetry (digital/analog I/O), ISDN/PSTN, serial and DialServ. See Expansion Cards section below for more information.
Web Interface (HTTP/HTTPS); CLI (Telnet, SSH, SMS, Serial port)
Management/Troubleshooting Tools
FTP, SFTP, SCP, Protocol Analyzer with PCAP for Wireshark, Event Logging with Syslog and SMTP, NTP/SNTP
Programming Tools/Environments
Python, DIA, Digi ESP™
Software Packages
Enterprise
Memory
64 MB RAM, 32 MB NOR Flash
Power
Input
8-48 VDC
Consumption
6W max, 4W typical
Connector
Locking barrel or 4-pin terminal block (extended temperature models only)
DC Power Cord*
Locking barrel to bare wire or 4-pin connector to bare wire
AC Power Supply*
100-240 VAC 50/60 Hz; Option of standard temperature or extended temperature
Physical
Dimensions (L x W x H)
4.7 in x 6.8 in x 1.3 in (120 mm x 173 mm x 32 mm)
Weight
1.27 lb (0.53 kg)
Status LEDs
Power, LAN, Wi-Fi, WWAN (Link, Act, SIM), Signal strength, Serial
Material/Rating****
Industrial (Metal) / IP30
Mounting
Brackets for wall mount & DIN rail sold separately
Environmental
Operating Temperature ***
Standard temp variants: 0° C to +40° C; Extended temp Wi-Fi variants: -10° C to +70° C; Extended temp non-Wi-Fi variants: -25° C to +70° C
Storage Temperature
-40° C to +85° C
Relative Humidity
0% to 95% (non-condensing) @ 25° C
Ethernet Isolation
1.5 kV RMS
Serial Port Protection (ESD)
15 kV
Approvals
GSM/UMTS
PTCRB, NAPRD.03, GCF-CC, R&TTE, EN 301 51
CDMA/EV-DO
CDG TIA/EIA-690, CDG TIA/EIA-98-E
Cellular Carriers
Certified by most major carriers.
Safety
UL 60950, CSA 22.2 No. 60950, EN60950
Emissions/Immunity
CE, FCC Part 15 Class B, AS/NZS CISPR 22, EN55024, EN55022 Class B*. *WR44 models with VDSL are Class A
Industry
E-Marking (72/245/EEC, 2009/19/EC); Automotive Non-Immunity (2004/104/ EC, 2005/49/EC, 2005/83/EC, 2006/28/EC); WR44R also includes: ISO7637-2 Class C, EN3000019-2-5 (Specification for environmental tests for ground vehicle installations – covers temperature, humidity, vibration and shock)
Warranty
Product Warranty
5 years
* Optional hardware
** Transfer rates are network operator dependent
*** Reduced cellular performance may occur outside of -20° C to +60° C. Standard temperature power supplies may reduce temperature range.
**** The enclosure rating is self-declared and has not been formally verified by an independent lab.
TXD, RXD, RTS, CTS, DTR, DSR, DCD, RI (No DSR/RI for RJ-45
ports on WR41 amp; 3 port serial card; RS-422/485 and sync signals available
on request)
Flow Control
Software (XON/XOFF), Hardware supported
COM Port Redirector
Digi patented RealPort®
Interfaces – Ethernet
Ports (Auto MDI/MDX)
4-port auto switch (configurable non-switch/mini-switch modes)
1 Ethernet port
1 Ethernet or 2 Ethernet option (configurable non-switch/switch
mode)
Specifications
IEEE 802.3 10/100 Base-T (auto-sensing) Full or Half
duplex
Interfaces – Other
Wi-Fi (option)
802.11b/g access point and client mode (b/g/n option for WR41); Open or
shared key authentication; WEP (64 and 128 bit) encryption; WPA/WPA2 with
Radius (WPA Enterprise and pre-shared keys); Support for multiple access
point mode; 2 x 50 Ω RP-SMA (Center pin – on device: male; on antenna:
female) connector (external); Transmit Power: 17 dBm ± 2 dBm (WR41),
20 dBm + 1.0/-1.5 dBm (WR44); Receive Sensitivity: 54 Mbps / -70 dBm and
11 Mbps / -83.5 dBm (WR41) 54Mbps / <-72dBm and 11Mbps / -90 dBm
(WR44)
N/A
GPS (option)
50 channel GPS engine (-163 dB sens.); NMEA 0183 V2.3 sentence
output; 50 Ω SMA (Center pin – on device: female; on antenna: male) connector
with +3.3VDC active antenna drive; NMEA stream to local serial port or over
TCP/IP; Galileo ready
N/A
Telemetry (option)
Telemetry 1: 4 x Opto-isolated digital output ports, 1 x
Opto-isolated digital input port, 1 x Relay I/O port, 1x Voltage monitoring
port, Internal temperature monitoring Telemetry 2: 4 x Isolated analog I/O
ports, 4x Non-isolated digital I/O ports
N/A
USB Host Port
1 Type A connector for expansion; Support for full or low speed
(high speed on WR21)
DTE, Ethernet, Power on, Cellular link/activity, Signal strength,
Wi-Fi
Mounting
Bulkhead mount, Wall mount and DIN rail options
available
Dimensions (L x W x H)
5.7 in x 8.3 in x 1.6 in (145 mm x 210 mm x 40 mm)
4.7 in x 6.8 in x 1.3 in (12 cm x 17.3 cm x 3.2 cm)
3.9 in x 5.2 in x 1.3 in (10 cm x 13.1 cm x 3.2 cm)
Weight
1.98 lb (0.9Kg)
1.27 lb (0.53 kg)
1.08 lb (0.49 kg)
Other
Standard dual SIM (SIM protection cover option); Conformal coating
(option)
Standard dual SIM (SIM protection cover option)
RF Features – GSM Models
EDGE
GPRS Class 10/EDGE class 10, Quadband 850/900/1800/1900
MHz
HSPA+
850/900/1900/2100 MHz with Rx Diversity
Antenna
HSPA/HSPA+/UMTS: 2 X 50 Ω SMA (Center pin – on device female; on
antenna: male), EDGE: 1 x 50 Ω SMA (Center pin – on device female; on
antenna: male)
RF Features – CDMA/Gobi Models
CDMA/EV-DO Rev A
Optional multi-mode 800/850/900/1700 (AWS)/1900/2100 HSPA+/EV-DO Gobi support; Optional 450 MHz, 3.1 Mbps down /
1.8 Mbps up, R-UIM support
Antenna
2 x 50 Ω SMA (Center pin – on device female; on antenna:
male)
Power Requirements
Power Input
11-58 VDC
8-48 VDC
9-30 VDC
Power Supply
100-240 VAC 50/60 Hz with barrel connector, Optional Molex connector with
bare wire leads
100-240 VAC 50/60 Hz with barrel connector, Optional barrel connector with
bare wire leads
100-240 VAC 60 Hz with locking barrel connector or terminal block
connector
Power Consumption
15W max, 8.5W typ
6W max, 4W typ
Environmental
Operating Temperature
WR44: 0° C to +60° C WR44 Extended Temp/WR44R: -40° C to +75° C -20° C
to +75° C (Wi-Fi models only) Reduced cellular performance may occur above
+60° C
-20° C to +55° C; -25° C to +70° C with reduced cellular
performance Wi-Fi models: -5° C to +55° C; -10° C to +70° C with reduced
performance
-35° C to +75° C with reduced cellular performance; Reduced cellular
performance may occur above +60° C
Relative Humidity
20% to 95% (non-condensing)
Ethernet Isolation
1.5 kV
Serial Port Protection (ESD)
15 kV
Approvals
Mobile Certifications – GSM/UMTS
PTCRB, NAPRD.03, GCF-CC, Ramp;TTE, EN 301 511
Mobile Certifications – CDMA/EV-DO
CDG TIA/EIA-690, CDG TIA/EIA-98-E
Wireless Carrier Certifications
Certified by most major carriers. See www.digi.com for current
listing.
Safety
UL 60950, CSA 22.2 No. 60950, EN60950
Emissions/Immunity
CE, FCC Part 15 Class B (FCC identifier GGL-R1902G), AS/NZS CISPR
22, EN55024, EN55022 Class A, E-Mark
Digi TransPort WR44 – 5 year Digi TransPort WR44 R – 3 year
5 year
5 year
Software Options
Digi TransPort® WR21
Digi TransPort WR21, Digi TransPort WR44/44 R
Features
Standard
Enterprise (includes Standard feature set)
Local Programming
Python
Protocols
HTTP, HTTPS, FTP, SFTP, SSL, SMTP, iDigi SNMP, SNMP (v1/v2c/v3), SSH, Telnet
and CLI for web management; remote management via software tool (option); SMS
management, protocol analyzer, ability to capture PCAP for use with Wireshark;
DynDNS
Same as Standard plus iDigi; Dynamic DNS client compatible with
BIND9/No-IP/DynDNS
Security/Firewall/VPN
IP Filtering
RADIUS TACACS+, SSL, SSLv2, SSLv3, FIPS 197, L2TP, (5 tunnels included);
IPSec with IKEv1, IKEv2, ISAKMP; DES, 3DES and AES up to 256-bit encryption;
SCEP for X.509 certificates, Open VPN client and server, PPTP; IPSec/PPP/L2TP
VPN Server support; Stateful inspection firewall with scripting; Content
Filtering (via 3rd party)
Routing
NAT, NATP; IP pass-through
Bridging, NAT/NAT-Traversal, NAPT forwarding; PPP, PPPoE, GRE; IP Routing
Protocol: PPP, GRE, RIP (v1 amp; v2) OSPF, SRI, BGP; IP Failover: VRRP, VRRP+TM;
VLAN support; STP (Spanning Tree Protocol); Automatic failover/failback to
second GSM network/Standby APN; Firmware upgradable to IPv6; iGMP routing
(multicast); IP pass-through (advanced)
Specialty Protocol
RealPort; DHCP
DHCP; RealPort; Modbus UDP/TCP to serial; Legacy protocols (X.25 (including
X0T), SNA/IP, TPAD and PAD); Protocol
switch
Hardware Interface Population Options for Digi
TransPort® WR41/44 Products
Interface Name
Interface Type
Technical Description
Sync/Async Serial Port (S1)
1 x DB-2
X.21/RS422/RS232 synchronous/asynchronous serial port
Async Serial Port (A1)*
1 x DB-25
Asynchronous serial port
Async Serial Ports (A3)
3 x RJ-45
Asynchronous serial ports
PSTN (P1)
1 x RJ-45
PSTN interface that can be used to dial out and receive calls. A PPP
session is created over which IP traffic can be sent and received. Includes:
• 1 x PSTN cable
DialServ (P3)
1 x RJ-11 (FXS)
Dial tone simulator to emulate local telco.
ISDN (I1)
1 x RJ-45
ISDN Basic Rate Interface (BRI) which can be configured either as a TE
(terminal endpoint) or as NT-1 (network termination). The option also includes
an additional asynchronous serial port via a second RJ-45 port.
ISDN-U/PSTN (I3)
1 x RJ-11, 1 x RJ-45
ISDN-U interface suitable for the USA plus PSTN interface. Can be configured
for Bell-103 modulation in leased line mode as well as a normal PSTN
interface.
Telemetry 1 (T1)
1 x 14 pin terminal block
4 x Opto-isolated digital output ports, 1x Opto-isolated digital input
port. It also provides a relay I/O port, a voltage monitoring port and internal
temperature monitoring. Fully programmable via Python for embedded Digi
TransPort applications. Includes: • 1 x mating connector
Telemetry 2 (T2)
1 x 14 pin terminal block
4 Analog/4 Digital I/O fully programmable via Python for embedded Digi
TransPort applications. Includes: • 1 x mating connector
GPS (G1)
1 x SMA
Internal GPS capability Includes: • 1 x magnetic-mount antenna
Fleet (F1)
1 x 15-pin, 1 x SMA, 1 x 4-pin
Flexible transportation/fleet focused applications requiring CAN bus, J1708,
GPS, Non-isolated digital I/O, Ignition Sense, 3-Axis accelerometer and power
control of Digi TransPort interfaces. Fully programmable via Python for
embedded Digi TransPort applications. Includes: • 1 x magnetic-mount
antenna • 1 x power cord
The Digi TransPort WR41 cellular router offers a robust communications solution with true enterprise class routing, security and firewall. This multifunction cellular router features a flexible design with optional integrated Wi-Fi access point (with multi SSID) / Client, USB, serial and single port Ethernet switch, as well as a variety of configuration options including multiple serial ports (async or sync), GPS or I/O telemetry modules.
The Digi TransPort WR41 offers an advanced routing, security and firewall feature set including stateful inspection firewall and integrated VPN. Enterprise class protocols incorporate BGP, GRE, OSPF and VRRP+, a patented technology built upon the popular VRRP failover standard providing true autosensing, auto-failure and auto-recovery of any line drop. Digi TransPort WR41 routers are ideal for PCI compliant applications including advanced security, logging and firewall features.
Digi remote management software provides easy setup, configuration and maintenance of large installations of Digi TransPort devices.
Reviews
There are no reviews yet.